ESR saturation power point of the hair of healthy, lung cancer, esophageal cancer, as well as silicosis, tuberculosis and cardiovascular disease were detected. The results show that the positive rate is 1.69%, 85.42%,...ESR saturation power point of the hair of healthy, lung cancer, esophageal cancer, as well as silicosis, tuberculosis and cardiovascular disease were detected. The results show that the positive rate is 1.69%, 85.42%, 90.4%, 20.00%, 27.27% and 0% respectively. There is a significant difference between lung cancer, esophageal cancer and healthy persons (P<0. 001). ESR saturation power point elevates sharply after treatment of lung cancer, 71. 43% of total cases ranged from 7. 9 to 24. 0 (mW), after treatment of esophageal cancer, 71. 23% ranged from 7.9 to 19.9 (mW). All patients with cardiovascular disease were examined to be negative, i. e. , above 10. 0 (mW).展开更多
When the GaAs/AlGaAs superlattice-based devices are used under irradiation environments, point defects may be created and ultimately deteriorate their electronic and transport properties. Thus, understanding the prope...When the GaAs/AlGaAs superlattice-based devices are used under irradiation environments, point defects may be created and ultimately deteriorate their electronic and transport properties. Thus, understanding the properties of point defects like vacancies and interstitials is essential for the successful application of semiconductor materials. In the present study, first-principles calculations are carried out to explore the stability of point defects in GaAs/Al_(0.5)Ga_(0.5)As superlattice and their effects on electronic properties. The results show that the interstitial defects and Frenkel pair defects are relatively difficult to form, while the antisite defects are favorably created generally. Besides, the existence of point defects generally modifies the electronic structure of GaAs/Al_(0.5)Ga_(0.5)As superlattice significantly, and most of the defective SL structures possess metallic characteristics. Considering the stability of point defects and carrier mobility of defective states,we propose an effective strategy that AlAs, GaAs, and AlGaantisite defects are introduced to improve the hole or electron mobility of GaAs/Al_(0.5)Ga_(0.5)As superlattice. The obtained results will contribute to the understanding of the radiation damage effects of the GaAs/AlGaAs superlattice, and provide a guidance for designing highly stable and durable semiconductor superlattice-based electronics and optoelectronics for extreme environment applications.展开更多
We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were use...We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.展开更多
A PI control strategy based on fuzzy set-point weighting following was proposed for the active damping control of a hydraulic crane boom system （HCBS）. Two valve-controlled PI controllers, which include a proportion...A PI control strategy based on fuzzy set-point weighting following was proposed for the active damping control of a hydraulic crane boom system （HCBS）. Two valve-controlled PI controllers, which include a proportional feedforward controller based on fuzzy set-point weighting following and a limited semi-integrator（LSI）, are designed respectively. LSI is used to limit output signal and to prevent wind up at the low frequency of the spectrum. By using a range camera and an electronic feedback control, the tip damping on the HCBS can be adjusted artificially. A collaborative control simulation technique of HOPSAN and MATLAB/SIMULINK is applied to the controller design. Simulation results show that the proposed PI control system has less overshoot as well as faster response. The tip damping on the HCBS during operation is improved.展开更多
In this paper,Changli station in Hebei Province was taken as an example,in which the minute data of geomagnetic Z component was used to analyze the spectral values of its main frequencies during normal time,geomagneti...In this paper,Changli station in Hebei Province was taken as an example,in which the minute data of geomagnetic Z component was used to analyze the spectral values of its main frequencies during normal time,geomagnetic storm time and low point displacement time interval respectively. After fitting of ten high spectral values to loga-rithmic functions,it is found that,by using same length of data,the spectral values at geomagnetic storm time in-crease apparently compared with those at normal time,especially at the high frequency segment. While low point displacement occurred,the spectral values at high frequency are approximate to those at normal time,but at period above 4 hours they are mostly lower than those at normal time. Comparison of accumulating of some FFT results at low point displacement and normal time shows that,spectral values at periods of 8.5 and 13.7 hours increase at low point displacement time relative to those at normal time. Compared with the images of Ne observed at DE-METER satellite,it is illustrated that the occurrence of geomagnetic low point displacement is well corresponding with the increase of Ne in ionosphere. Finally it was discussed about those spectral features and the occurrence mechanism of geomagnetic low point displacement.展开更多
对光伏阵列进行最大功率点跟踪控制(Maximum Power Point Tracking,简称MPPT),是提高光伏发电系统输出功率的有效措施之一。文章以光伏阵列非线性输出特性为切入点展开研究,在分析了常规算法的优缺点基础上,针对其在最大功率点处(MPP)...对光伏阵列进行最大功率点跟踪控制(Maximum Power Point Tracking,简称MPPT),是提高光伏发电系统输出功率的有效措施之一。文章以光伏阵列非线性输出特性为切入点展开研究,在分析了常规算法的优缺点基础上,针对其在最大功率点处(MPP)动态和稳态性能不佳等问题,提出了一种基于布谷鸟搜索算法(CSA)和模糊PI(FPI)控制相结合的光伏阵列MPPT算法。在MATLAB/Simulink下进行了仿真建模,仿真结果表明该方法能够迅速准确地跟踪光伏阵列的最大功率点,防止算法跟踪方向误判情况的发生,具有快速跟踪性和鲁棒性;同时实验结果也证实了上述算法的正确性和有效性。展开更多
文摘ESR saturation power point of the hair of healthy, lung cancer, esophageal cancer, as well as silicosis, tuberculosis and cardiovascular disease were detected. The results show that the positive rate is 1.69%, 85.42%, 90.4%, 20.00%, 27.27% and 0% respectively. There is a significant difference between lung cancer, esophageal cancer and healthy persons (P<0. 001). ESR saturation power point elevates sharply after treatment of lung cancer, 71. 43% of total cases ranged from 7. 9 to 24. 0 (mW), after treatment of esophageal cancer, 71. 23% ranged from 7.9 to 19.9 (mW). All patients with cardiovascular disease were examined to be negative, i. e. , above 10. 0 (mW).
基金Project supported by the NSAF Joint Foundation of China (Grant No. U1930120)the Key Natural Science Foundation of Gansu Province, China (Grant No. 20JR5RA211)the National Natural Science Foundation of China (Grant No. 11774044)。
文摘When the GaAs/AlGaAs superlattice-based devices are used under irradiation environments, point defects may be created and ultimately deteriorate their electronic and transport properties. Thus, understanding the properties of point defects like vacancies and interstitials is essential for the successful application of semiconductor materials. In the present study, first-principles calculations are carried out to explore the stability of point defects in GaAs/Al_(0.5)Ga_(0.5)As superlattice and their effects on electronic properties. The results show that the interstitial defects and Frenkel pair defects are relatively difficult to form, while the antisite defects are favorably created generally. Besides, the existence of point defects generally modifies the electronic structure of GaAs/Al_(0.5)Ga_(0.5)As superlattice significantly, and most of the defective SL structures possess metallic characteristics. Considering the stability of point defects and carrier mobility of defective states,we propose an effective strategy that AlAs, GaAs, and AlGaantisite defects are introduced to improve the hole or electron mobility of GaAs/Al_(0.5)Ga_(0.5)As superlattice. The obtained results will contribute to the understanding of the radiation damage effects of the GaAs/AlGaAs superlattice, and provide a guidance for designing highly stable and durable semiconductor superlattice-based electronics and optoelectronics for extreme environment applications.
文摘We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.
基金This work was supported by the Natural Science Foundation of Hunan Province(No.04JJ6033) and Scientific Research Fund of Hunan ProvincialEducation Department(No. 03C066).
文摘A PI control strategy based on fuzzy set-point weighting following was proposed for the active damping control of a hydraulic crane boom system （HCBS）. Two valve-controlled PI controllers, which include a proportional feedforward controller based on fuzzy set-point weighting following and a limited semi-integrator（LSI）, are designed respectively. LSI is used to limit output signal and to prevent wind up at the low frequency of the spectrum. By using a range camera and an electronic feedback control, the tip damping on the HCBS can be adjusted artificially. A collaborative control simulation technique of HOPSAN and MATLAB/SIMULINK is applied to the controller design. Simulation results show that the proposed PI control system has less overshoot as well as faster response. The tip damping on the HCBS during operation is improved.
基金National Science and Technology Program (2006BAC011302-04-02)Basic Research Project in Institute of Earthquake Science,China Earthquake Administration.
文摘In this paper,Changli station in Hebei Province was taken as an example,in which the minute data of geomagnetic Z component was used to analyze the spectral values of its main frequencies during normal time,geomagnetic storm time and low point displacement time interval respectively. After fitting of ten high spectral values to loga-rithmic functions,it is found that,by using same length of data,the spectral values at geomagnetic storm time in-crease apparently compared with those at normal time,especially at the high frequency segment. While low point displacement occurred,the spectral values at high frequency are approximate to those at normal time,but at period above 4 hours they are mostly lower than those at normal time. Comparison of accumulating of some FFT results at low point displacement and normal time shows that,spectral values at periods of 8.5 and 13.7 hours increase at low point displacement time relative to those at normal time. Compared with the images of Ne observed at DE-METER satellite,it is illustrated that the occurrence of geomagnetic low point displacement is well corresponding with the increase of Ne in ionosphere. Finally it was discussed about those spectral features and the occurrence mechanism of geomagnetic low point displacement.
文摘对光伏阵列进行最大功率点跟踪控制(Maximum Power Point Tracking,简称MPPT),是提高光伏发电系统输出功率的有效措施之一。文章以光伏阵列非线性输出特性为切入点展开研究,在分析了常规算法的优缺点基础上,针对其在最大功率点处(MPP)动态和稳态性能不佳等问题,提出了一种基于布谷鸟搜索算法(CSA)和模糊PI(FPI)控制相结合的光伏阵列MPPT算法。在MATLAB/Simulink下进行了仿真建模,仿真结果表明该方法能够迅速准确地跟踪光伏阵列的最大功率点,防止算法跟踪方向误判情况的发生,具有快速跟踪性和鲁棒性;同时实验结果也证实了上述算法的正确性和有效性。
