Effect of Chirality on the Electronic Transport Properties of the Thioxanthene-Based Molecular Switch

Based on the nonequilibrium Green function method and density functional theory calculations, we theoretically investigate the effect of chirality on the electronic transport properties of thioxanthene-based molecular switch. The molecule comprises the switch which can exhibit different chiralities, that is, cis-form and trans-form by ultraviolet or visible irradiation. The results clearly reveal that the switching behaviors can be realized when the molecule converts between cis-form and trans-form. ~urthermore, the on-off ratio can be modulated by the chirality of the carbon nanotube electrodes. The maximum on-off ratio can reach 109 at 0.4 V for the armchair junction, suggesting potential applications of this type of junctions in future design of functional molecular devices.

A Silicon Cluster Based Single Electron Transistor with Potential Room-Temperature Switching

We demonstrate the fabrication of a single electron transistor device based on a single ultra-small silicon quantum dot connected to a gold break junction with a nanometer scale separation. The gold break junction is created through a controllable electromigration process and the individual silicon quantum dot in the junction is deter- mined to be a Si 170 cluster. Differential conductance as a function of the bias and gate voltage clearly shows the Coulomb diamond which confirms that the transport is dominated by a single silicon quantum dot. It is found that the charging energy can be as large as 300meV, which is a result of the large capacitance of a small silicon quantum dot （-1.8 nm）. This large Coulomb interaction can potentially enable a single electron transistor to work at room temperature. The level spacing of the excited state can be as large as 10meV, which enables us to manipulate individual spin via an external magnetic field. The resulting Zeeman splitting is measured and the g factor of 2.3 is obtained, suggesting relatively weak electron-electron interaction in the silicon quantum dot which is beneficial for spin coherence time.

High-Performance AC-DC Power Electronic Converter Generator for Hybrid-Solar Vehicles

This paper describes the principles of operation and the physical model of an advanced AC-DC converter generator （with the electronic converter acting as an AC-DC rectifier with reverse-conducting MOSFETs （metal-oxide semiconductor field-effect transistors） as fast-electronic switches with a relatively low ON-state voltage drop） for HSVs. An AC-DC converter, when seen as an AC-DC rectifier, can be used in many fields, e.g., for multi-functional AC-DC/DC-AC convener generator^starter and conventional DC-AC convener motors and AC-DC converter generators or generator sets, welding machines, etc. The paper also describes a novel AC-DC convener, with reverse-conducting transistors and without the use of optoelectronic separation （which does not require a separate power supply）, which may be easily realized in IC （integrated-circuit） technology. Computer simulation allows for waveform evaluation for timing analysis of all components of the AC-DC-converter＇s physical model, both during normal operation as well as in some states of emergency. The paper also presents the results of bench experimental studies where the MOSFETs were used as fast-electronic switches with a relatively low ON-state voltage drop. For experimental studies, a novel AC-DC converter has been put together on the Mitsubishi FM600TU-3A module. The AC-DC converter with reverse-conducting transistors in a double-way connection has a lot of advantages compared to the conventional AC-DC convener acting as a diode rectifier, such as higher energy efficiency and greater reliability resulting from the lower temperature of electronic switches.

A digital wide range neutron flux measuring system for HL-2A

To achieve wide-range, high-integration, and real-time performance on the neutron flux measurement on the HL-2A tokamak, a digital neutron flux measuring（DNFM） system based on the peripheral component interconnection（PCI） e Xtension for Instrumentation express（PXIe） bus was designed.This system comprises a charge-sensitive preamplifier and a field programmable gate array（FPGA）-based main electronics plug-in. The DNFM totally covers source-range and intermediate-range neutron flux measurements, and increases system integration by a large margin through joining the pulse-counting mode and Campbell mode. Meanwhile, the neutron flux estimation method based on pulse piling proportions is able to choose and switch measuring modes in accordance with current flux, and this ensures the accuracy of measurements when the neutron flux changes suddenly. It has been demonstrated by simulated signals that the DNFM enhances the full-scale measuring range up to 1.9×10^8cm^-2s^-1, with relative error below 6.1%. The DNFM has been verified to provide a high temporal sensitivity at 10 ms time intervals on a single fission chamber on HL-2A.

Features and Prototypes of HTS High Q Resonant Circuit

High Te superconductor （HTS） technology has been used to develop a unique high Q resonant circuit. Such circuit or device has some special characteristics such as very high voltage generation. Theoretical study and experimental approaches have proceeded for the concept verification. This paper presents the theory about this high Q resonant circuit. The operation principle of the circuit is described. A practical prototype for HTS high voltage generation is also demonstrated. The experiment result shows that very high voltages can be achieved by the developed method using HTS technology.

High Temperature Superconducting Magnetic Energy Storage and Its Power Control Technology

High temperature superconducting （HTS） power inductor and its control technology have been studied and analyzed in the paper. Based on the results of simulations and practical experiments, a controlled release scheme has been proposed and verified for developing a practical HTS SMES prototype.

A first-principles study of dihydroazulene as a possible optical molecular switch

By applying nonequilibrium Green's function formalism combined with first-principles density functional theory, we investigate the electronic transport properties of the dihydroazulene optical molecular switch. Three kinds of adsorption sites including the hollow, bridge and top sites are studied. The two forms of this molecule, namely the open form and the closed form, can reversibly switch from each other upon photoexcitation. Their transmission spectra are remarkably distinctive. Theoretical results show that the current of the closed form is always significantly larger than that of the open form for all three adsorption sites, which promises this system as possibly one of the good candidates for optical switches due to its unique advantage, and which may have some potential applications in the future molecular circuit.