A Generic Strategy to Create Mechanically Interlocked Nanocomposite/Hydrogel Hybrid Electrodes for Epidermal Electronics

Stretchable electronics are crucial enablers for next-generation wearables intimately integrated into the human body.As the primary compliant conductors used in these devices,metallic nanostructure/elastomer composites often struggle to form conformal contact with the textured skin.Hybrid electrodes have been consequently developed based on conductive nanocomposite and soft hydrogels to establish seamless skin-device interfaces.However,chemical modifications are typically needed for reliable bonding,which can alter their original properties.To overcome this limitation,this study presents a facile fabrication approach for mechanically interlocked nanocomposite/hydrogel hybrid electrodes.In this physical process,soft microfoams are thermally laminated on silver nanowire nanocomposites as a porous interface,which forms an interpenetrating network with the hydrogel.The microfoam-enabled bonding strategy is generally compatible with various polymers.The resulting interlocked hybrids have a 28-fold improved interfacial toughness compared to directly stacked hybrids.These electrodes achieve firm attachment to the skin and low contact impedance using tissue-adhesive hydrogels.They have been successfully integrated into an epidermal sleeve to distinguish hand gestures by sensing mus-cle contractions.Interlocked nanocomposite/hydrogel hybrids reported here offer a promising platform to combine the benefits of both materials for epidermal devices and systems.

Advances in Wireless,Batteryless,Implantable Electronics for Real‑Time,Continuous Physiological Monitoring

This review summarizes recent progress in developing wireless,batteryless,fully implantable biomedical devices for real-time continuous physiological signal monitoring,focusing on advancing human health care.Design considerations,such as biological constraints,energy sourcing,and wireless communication,are discussed in achieving the desired performance of the devices and enhanced interface with human tissues.In addition,we review the recent achievements in materials used for developing implantable systems,emphasizing their importance in achieving multi-functionalities,biocompatibility,and hemocompatibility.The wireless,batteryless devices offer minimally invasive device insertion to the body,enabling portable health monitoring and advanced disease diagnosis.Lastly,we summarize the most recent practical applications of advanced implantable devices for human health care,highlighting their potential for immediate commercialization and clinical uses.

Design and prototyping of the readout electronics for the transition radiation detector in the high energy cosmic radiation detection facility

The high energy cosmic-radiation detection(HERD)facility is planned to launch in 2027 and scheduled to be installed on the China Space Station.It serves as a dark matter particle detector,a cosmic ray instrument,and an observatory for high-energy gamma rays.A transition radiation detector placed on one of its lateral sides serves dual purpose,(ⅰ)calibrating HERD's electromagnetic calorimeter in the TeV energy range,and(ⅱ)serving as an independent detector for high-energy gamma rays.In this paper,the prototype readout electronics design of the transition radiation detector is demonstrated,which aims to accurately measure the charge of the anodes using the SAMPA application specific integrated circuit chip.The electronic performance of the prototype system is evaluated in terms of noise,linearity,and resolution.Through the presented design,each electronic channel can achieve a dynamic range of 0–100 fC,the RMS noise level not exceeding 0.15 fC,and the integral nonlinearity was<0.2%.To further verify the readout electronic performance,a joint test with the detector was carried out,and the results show that the prototype system can satisfy the requirements of the detector's scientific goals.

On-Chip Micro Temperature Controllers Based on Freestanding Thermoelectric Nano Films for Low-Power Electronics

Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.

3D‑Printed Carbon‑Based Conformal Electromagnetic Interference Shielding Module for Integrated Electronics

Electromagnetic interference shielding(EMI SE)modules are the core com-ponent of modern electronics.However,the tra-ditional metal-based SE modules always take up indispensable three-dimensional space inside electronics,posing a major obstacle to the integra-tion of electronics.The innovation of integrating 3D-printed conformal shielding(c-SE)modules with packaging materials onto core electronics offers infinite possibilities to satisfy ideal SE func-tion without occupying additional space.Herein,the 3D printable carbon-based inks with various proportions of graphene and carbon nanotube nanoparticles are well-formulated by manipulating their rheological peculiarity.Accordingly,the free-constructed architectures with arbitrarily-customized structure and multifunctionality are created via 3D printing.In particular,the SE performance of 3D-printed frame is up to 61.4 dB,simultaneously accompanied with an ultralight architecture of 0.076 g cm^(-3) and a superhigh specific shielding of 802.4 dB cm3 g^(-1).Moreover,as a proof-of-concept,the 3D-printed c-SE module is in situ integrated into core electronics,successfully replacing the traditional metal-based module to afford multiple functions for electromagnetic compatibility and thermal dissipa-tion.Thus,this scientific innovation completely makes up the blank for assembling carbon-based c-SE modules and sheds a brilliant light on developing the next generation of high-performance shielding materials with arbitrarily-customized structure for integrated electronics.

Reform of the Comprehensive Practical Course System for Mechanical and Electronic Engineering Majors Under the Background of New Engineering

Under the background of new engineering,the reform of the comprehensive practical course system for mechanical and electronic engineering majors actively responds to the challenges posed by the new round of technological revolution and industrial transformation to higher education,cultivating top-notch innovative intellectuals with comprehensive engineering qualities,meeting the requirements of being able to solve complex engineering problems rather than just cognitive capabilities,forming two core courses through reconstructing and reshaping the core courses of the major.The core courses include Drive,Measurement,and Control I and Drive,Measurement,and Control II,which highlight the comprehensive framework of mechanical and electronic engineering professional knowledge,continuing the comprehensive practical course system based on the unity of knowledge and practice,following the trend of new engineering,highlighting the practicality of professional innovation,assisting engineering education reform,and promoting high-quality development of new engineering professionals cultivation.

The Model of“Post,Course,Competition,Certificate”Integrated Education for Electronic Information Engineering Technology Major in Higher Vocational Colleges

The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent training,higher vocational colleges need to pay attention to establishing an all-round and three-dimensional education model,and promote innovation of higher vocational education on the basis of this.It is also a way to promote the innovation of higher vocational education to vigorously promote the construction of“post,course,competition,certificate”mode in the construction of education mode.Through the construction of“post,course,competition,certificate”mode,the education mode of higher vocational colleges is gradually improved,so as to strengthen the effectiveness of talent training in higher vocational colleges.Therefore,in this paper,the author puts forward some suggestions to promote the construction of the integrated education mode of the electronic information engineering technology major in higher vocational colleges,so as to help improve the talent training level of higher vocational colleges.

Soft Electronics for Health Monitoring Assisted by Machine Learning

Due to the development of the novel materials,the past two decades have witnessed the rapid advances of soft electronics.The soft electronics have huge potential in the physical sign monitoring and health care.One of the important advantages of soft electronics is forming good interface with skin,which can increase the user scale and improve the signal quality.Therefore,it is easy to build the specific dataset,which is important to improve the performance of machine learning algorithm.At the same time,with the assistance of machine learning algorithm,the soft electronics have become more and more intelligent to realize real-time analysis and diagnosis.The soft electronics and machining learning algorithms complement each other very well.It is indubitable that the soft electronics will bring us to a healthier and more intelligent world in the near future.Therefore,in this review,we will give a careful introduction about the new soft material,physiological signal detected by soft devices,and the soft devices assisted by machine learning algorithm.Some soft materials will be discussed such as two-dimensional material,carbon nanotube,nanowire,nanomesh,and hydrogel.Then,soft sensors will be discussed according to the physiological signal types(pulse,respiration,human motion,intraocular pressure,phonation,etc.).After that,the soft electronics assisted by various algorithms will be reviewed,including some classical algorithms and powerful neural network algorithms.Especially,the soft device assisted by neural network will be introduced carefully.Finally,the outlook,challenge,and conclusion of soft system powered by machine learning algorithm will be discussed.

Transparent,Ultra-Stretching,Tough,Adhesive Carboxyethyl Chitin/Polyacrylamide Hydrogel Toward High-Performance Soft Electronics

To date,hydrogels have gained increasing attentions as a flexible conductive material in fabricating soft electronics.However,it remains a big challenge to integrate multiple functions into one gel that can be used widely under various conditions.Herein,a kind of multifunc-tional hydrogel with a combination of desirable characteristics,including remarkable transparency,high conductivity,ultra-stretchability,tough-ness,good fatigue resistance,and strong adhesive ability is presented,which was facilely fabricated through multiple noncovalent crosslinking strategy.The resultant versatile sensors are able to detect both weak and large deformations,which owns a low detection limit of 0.1%strain,high stretchability up to 1586%,ultrahigh sensitivity with a gauge factor up to 18.54,as well as wide pressure sensing range(0-600 kPa).Meanwhile,the fabrication of conductive hydrogel-based sensors is demonstrated for various soft electronic devices,including a flexible human-machine interactive system,the soft tactile switch,an integrated electronic skin for unprecedented nonplanar visualized pressure sensing,and the stretchable triboelectric nanogenerators with excellent biomechanical energy harvesting ability.This work opens up a simple route for multifunctional hydrogel and promises the practical application of soft and self-powered wearable electronics in various complex scenes.

ZnO nanowires based degradable high-performance photodetectors for eco-friendly green electronics

Disposable devices designed for single and/or multiple reliable measurements over a short duration have attracted considerable interest recently. However, these devices often use non-recyclable and non-biodegradable materials and wasteful fabrication methods. Herein, we present ZnO nanowires(NWs) based degradable high-performance UV photodetectors(PDs) on flexible chitosan substrate. Systematic investigations reveal the presented device exhibits excellent photo response, including high responsivity(55 A/W), superior specific detectivity(4×10^(14) jones), and the highest gain(8.5×10~(10)) among the reported state of the art biodegradable PDs. Further, the presented PDs display excellent mechanical flexibility under wide range of bending conditions and thermal stability in the measured temperature range(5–50 ℃).The biodegradability studies performed on the device, in both deionized(DI) water(pH≈6) and PBS solution(pH=7.4),show fast degradability in DI water(20 mins) as compared to PBS(48 h). These results show the potential the presented approach holds for green and cost-effective fabrication of wearable, and disposable sensing systems with reduced adverse environmental impact.

Biological Tissue-Inspired Ultrasoft,Ultrathin,and Mechanically Enhanced Microfiber Composite Hydrogel for Flexible Bioelectronics

Hydrogels offer tissue-like softness,stretchability,fracture toughness,ionic conductivity,and compatibility with biological tissues,which make them promising candidates for fabricating flexible bioelectronics.A soft hydrogel film offers an ideal interface to directly bridge thin-film electronics with the soft tissues.However,it remains difficult to fabricate a soft hydrogel film with an ultrathin configuration and excellent mechanical strength.Here we report a biological tissue-inspired ultrasoft microfiber composite ultrathin(<5μm)hydrogel film,which is currently the thinnest hydrogel film as far as we know.The embedded microfibers endow the composite hydrogel with prominent mechanical strength(tensile stress~6 MPa)and anti-tearing property.Moreover,our microfiber composite hydrogel offers the capability of tunable mechanical properties in a broad range,allowing for matching the modulus of most biological tissues and organs.The incorporation of glycerol and salt ions imparts the microfiber composite hydrogel with high ionic conductivity and prominent anti-dehydration behavior.Such microfiber composite hydrogels are promising for constructing attaching-type flexible bioelectronics to monitor biosignals.

Recent advances in meniscus-on-demand three-dimensional micro-and nano-printing for electronics and photonics

The continual demand for modern optoelectronics with a high integration degree and customized functions has increased requirements for nanofabrication methods with high resolution,freeform,and mask-free.Meniscus-on-demand three-dimensional(3D)printing is a high-resolution additive manufacturing technique that exploits the ink meniscus formed on a printer nozzle and is suitable for the fabrication of micro/nanoscale 3D architectures.This method can be used for solution-processed 3D patterning of materials at a resolution of up to100 nm,which provides an excellent platform for fundamental scientific studies and various practical applications.This review presents recent advances in meniscus-on-demand 3D printing,together with historical perspectives and theoretical background on meniscus formation and stability.Moreover,this review highlights the capabilities of meniscus-on-demand 3D printing in terms of printable materials and potential areas of application,such as electronics and photonics.

Research Progress on the Solder Joint Reliability of Electronics Using in Deep Space Exploration

The spacecraft for deep space exploration missions will face extreme environments,including cryogenic temperature,intense radiation,wide-range temperature variations and even the combination of conditions mentioned above.Harsh environments will lead to solder joints degradation or even failure,resulting in damage to onboard electronics.The research activities on high reliability solder joints using in extreme environments can not only reduce the use of onboard protection devices,but effectively improve the overall reliability of spacecraft,which is of great significance to the aviation industry.In this paper,we review the reliability research on SnPb solder alloys,Sn-based lead-free solder alloys and In-based solder alloys in extreme environments,and try to provide some suggestions for the follow-up studies,which focus on solder joint reliability under extreme environments.

THz plasmonics and electronics in germanene nanostrips

Germanene nanostrips(GeNSs)have garnered significant attention in modern semiconductor technology due to their exceptional physical characteristics,positioning them as promising candidates for a wide range of applications.GeNSs exhibit a two-dimensional(buckled)honeycomb-like lattice,which is similar to germanene but with controllable bandgaps.The modeling of GeNSs is essential for developing appropriate synthesis methods as it enables understanding and controlling the growth process of these systems.Indeed,one can adjust the strip width,which in turn can tune the bandgap and plasmonic response of the material to meet specific device requirements.In this study,the objective is to investigate the electronic behav-ior and THz plasmon features of GeNSs(≥100 nm wide).A semi-analytical model based on the charge-carrier velocity of free-standing germanene is utilized for this purpose.The charge-carrier velocity of freestanding germanene is determined through the GW approximation(V_(F)=0.702×10^(6)m·s^(−1)).Within the width range of 100 to 500 nm,GeNSs exhibit narrow bandgaps,typi-cally measuring only a few meV.Specifically,upon analysis,it was found that the bandgaps of the investigated GeNSs ranged between 29 and 6 meV.As well,these nanostrips exhibit√q-like plasmon dispersions,with their connected plasmonic fre-quency(≤30 THz)capable of being manipulated by varying parameters such as strip width,excitation plasmon angle,and sam-ple quality.These manipulations can lead to frequency variations,either increasing or decreasing,as well as shifts towards larger momentum values.The outcomes of our study serve as a foundational motivation for future experiments,and further con-firmation is needed to validate the reported results.

Textile electronics for wearable applications

Textile electronics have become an indispensable part of wearable applications because of their large flexibility,light-weight,comfort and electronic functionality upon the merge of textiles and microelectronics.As a result,the fabrication of functional fibrous materials and the integration of textile electronic devices have attracted increasing interest in the wearable electronic community.Challenges are encountered in the development of textile electronics in a way that is electrically reliable and durable,without compromising on the deformability and comfort of a garment,including processing multiple materials with great mismatches in mechanical,thermal,and electrical properties and assembling various structures with the disparity in dimensional scales and surface roughness.Equal challenges lie in high-quality and cost-effective processes facilitated by high-level digital technology enabled design and manufacturing methods.This work reviews the manufacturing of textile-shaped electronics via the processing of functional fibrous materials from the perspective of hierarchical architectures,and discusses the heterogeneous integration of microelectronics into normal textiles upon the fabric circuit board and adapted electrical connections,broadly covering both conventional and advanced textile electronic production processes.We summarize the applications and obstacles of textile electronics explored so far in sensors,actuators,thermal management,energy fields,and displays.Finally,the main conclusions and outlook are provided while the remaining challenges of the fabrication and application of textile electronics are emphasized.

Electronics system for the cosmic X-ray polarization detector

This study presents an electronics system for cosmic X-ray polarization detection(CXPD).The CXPD was designed as a high-sensitivity soft X-ray polarimeter with a measurement energy range of 2-10 keV carried by a CubeSat.A stable and functionally complete electronics system under power and space constraints is a key challenge.The complete CXPD electronics system(CXPDES)comprises hardware and firmware.CXPDES adopts a three-layer electronic board structure based on functionality and available space.Two gas pixel detectors(GPDs)were placed on the top layer board,and CXPDES provided the GPDs with voltages up to-4000 V.Each GPD signal was digitized,compressed,encoded,and stored before being transmitted to the ground.The CXPDES provided stable and high-speed communication based on a scheme that separated command and data transmission,and it supports the CXPDES in-orbit upgrade.In addition,environmental monitors,silicon photomultiplier(SiPM)triggers,power management,GPDs configuration,and mode switches were included in the overall operating logic of the CXPDES.The results obtained by testing the CXPDES showed that it satisfied all the requirements of CXPD.The CXPDES provides design experience and technological readiness for future large-area X-ray polarimetry missions.

Rational Design of Cellulosic Triboelectric Materials for Self‑Powered Wearable Electronics

With the rapid development of the Internet of Things and flexible electronic technologies,there is a growing demand for wireless,sustainable,multifunctional,and independently operating self-powered wearable devices.Nevertheless,structural flexibility,long operating time,and wearing comfort have become key requirements for the widespread adoption of wearable electronics.Triboelectric nanogenerators as a distributed energy harvesting technology have great potential for application development in wearable sensing.Compared with rigid electronics,cellulosic self-powered wearable electronics have significant advantages in terms of flexibility,breathability,and functionality.In this paper,the research progress of advanced cellulosic triboelectric materials for self-powered wearable electronics is reviewed.The interfacial characteristics of cellulose are introduced from the top-down,bottom-up,and interfacial characteristics of the composite material preparation process.Meanwhile,the modulation strategies of triboelectric properties of cellulosic triboelectric materials are presented.Furthermore,the design strategies of triboelectric materials such as surface functionalization,interfacial structure design,and vacuum-assisted self-assembly are systematically discussed.In particular,cellulosic self-powered wearable electronics in the fields of human energy harvesting,tactile sensing,health monitoring,human–machine interaction,and intelligent fire warning are outlined in detail.Finally,the current challenges and future development directions of cellulosic triboelectric materials for self-powered wearable electronics are discussed.

Synthesized All-Pass Waveguide for Ultrafast Electronics

Ultrashort pulse transmission has been recognized as a primary problem that fundamentally hinders the development of ultrafast electronics beyond the current nanosecond timescale.This requires a transmission line or waveguide that exhibits an all-pass frequency behavior for the transmitted ultrashort pulse signals.However,this type of waveguiding structure has not yet been practically developed;groundbreaking innovations and advances in signal transmission technology are urgently required to address this scenario.Herein,we present a synthesized all-pass waveguide that demonstrates record guidedwave controlling capabilities,including eigenmode reshaping,polarization rotation,loss reduction,and dispersion improvement.We experimentally developed two waveguides for use in ultrabroad frequency ranges(direct current(DC)-to-millimeter-wave and DC-to-terahertz).Our results suggest that the waveguides can efficiently transmit picosecond electrical pulses while maintaining signal integrity.This waveguide technology is an important breakthrough in the evolution of ultrafast electronics,providing a path towards frequency-engineered ultrashort pulses for low-loss and low-dispersion transmissions.

Design and development of multi-channel front end electronics based on dual-polarity charge-to-digital converter for SiPM detector applications

With the development of silicon photomultiplier(SiPM)technology,front-end electronics for SiPM signal processing have been highly sought after in various fields.A compact 64-channel front-end electronics(FEE)system achieved by fieldprogrammable gate array-based charge-to-digital converter(FPGA-QDC)technology was built and developed.The FEE consists of an analog board and FPGA board.The analog board incorporates commercial amplifiers,resistors,and capacitors.The FPGA board is composed of a low-cost FPGA.The electronics performance of the FEE was evaluated in terms of noise,linearity,and uniformity.A positron emission tomography(PET)detector with three different readout configurations was designed to validate the readout capability of the FEE for SiPM-based detectors.The PET detector was made of a 15×15 lutetium–yttrium oxyorthosilicate(LYSO)crystal array directly coupled with a SiPM array detector.The experimental results show that FEE can process dual-polarity charge signals from the SiPM detectors.In addition,it shows a good energy resolution for 511-keV gamma photons under the dual-end readout for the LYSO crystal array irradiated by a Na-22 source.Overall,the FEE based on FPGA-QDC shows promise for application in SiPM-based radiation detectors.

Reconfigurable Mott electronics for homogeneous neuromorphic platform

To simplify the fabrication process and increase the versatility of neuromorphic systems,the reconfiguration concept has attracted much attention.Here,we developed a novel electrochemical VO_(2)(EC-VO_(2))device,which can be reconfigured as synapses or LIF neurons.The ionic dynamic doping contributed to the resistance changes of VO_(2),which enables the reversible modulation of device states.The analog resistance switching and tunable LIF functions were both measured based on the same device to demonstrate the capacity of reconfiguration.Based on the reconfigurable EC-VO_(2),the simulated spiking neural network model exhibited excellent performances by using low-precision weights and tunable output neurons,whose final accuracy reached 91.92%.