The simulation of the electromagnetic wave propagation plays an important role in predicting the performance of wireless transmission and communication systems. This research paper performs a numerical simulation usin...The simulation of the electromagnetic wave propagation plays an important role in predicting the performance of wireless transmission and communication systems. This research paper performs a numerical simulation using the finite element method (FEM) to study electromagnetic propagation through both conductive and dielectric media. The simulations are made using the COMSOL Multiphysics software which notably implements the finite element method. The microwave is produced by a Vivaldi antenna at the respective frequencies of 2.6 and 5 GHz and the propagation equation is formulated from Maxwell’s equations. The results obtained show that in the air, strong electric fields are observed in the slot and the micro-strip line for the two frequencies, they are even greater when the wave propagates in the glass and very weak for the copper. The 3D evolutions of the wave in air and glass present comparable values at equal frequencies, the curves being more regular in air (dielectric). The radiation patterns produced for air and glass are directional, with a large main lobe, which is narrower at 5 GHz. For copper, the wave propagation is quite uniform in space, and the radiation patterns show two main lobes with a much larger size at 2.6 GHz than at 5 GHz. The propagation medium would therefore influence the range of values of the gain of the antenna.展开更多
The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculation...The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculations and numerical analysis for the microstrip patch antennas. In this paper, two different designs have been modelled and analyzed and both designs are based on the rectangular patches. The feeding point of one design is inside the patch while the other design contains feeding point outside the patch is T shaped. The computational analysis showed some interesting results for radiation pattern and far field domain. For these designs, the characteristic impedance taken is 50 Ω and the operating frequency domain is 1.4 to 1.7 GHz. The microstrip patch antennas are encapsulated in the inert spherical atmosphere of 20 mm thickness containing air inside it.展开更多
In recent years, several attempts have been made in designing planar array antennas with high directivity. This paper is aimed at investigating the impact of element spacing on the directivity of planar array of monop...In recent years, several attempts have been made in designing planar array antennas with high directivity. This paper is aimed at investigating the impact of element spacing on the directivity of planar array of monopole antenna. The directivity of antenna with reduced grating lobes can be obtained by carefully varying the inter-element spacing of array antenna. Based on this conception, this paper presents the investigation carried out on the relationship between inter-element spacing and the directivity of planar array of monopole antenna. It went further to highlight the effect on the total fields radiated by the antenna. The inter-element spacing is one of the most important antenna parameters that determine the directivity of the antenna. For a planar array of monopole, the directivity can be improved by varying the inter-element spacing. Four elements uniform planar array antenna and Hadamard matrix method was used to determine element positioning in the array matrix. The simulated results obtained using Matlab, showed that good directivity was obtained by using element spacing between 0.1λ - 0.5λ. Increasing the spacing beyond 0.6λ - 1.0λ also improved the directivity, but generated many grating lobes. As inter-element spacing increased, the grating lobes increased in size, number and levels. The study, therefore, inferred that the best directivity (radiation pattern) can only be obtained when the element spacing is within 0.1 - 0.5λ.展开更多
文摘The simulation of the electromagnetic wave propagation plays an important role in predicting the performance of wireless transmission and communication systems. This research paper performs a numerical simulation using the finite element method (FEM) to study electromagnetic propagation through both conductive and dielectric media. The simulations are made using the COMSOL Multiphysics software which notably implements the finite element method. The microwave is produced by a Vivaldi antenna at the respective frequencies of 2.6 and 5 GHz and the propagation equation is formulated from Maxwell’s equations. The results obtained show that in the air, strong electric fields are observed in the slot and the micro-strip line for the two frequencies, they are even greater when the wave propagates in the glass and very weak for the copper. The 3D evolutions of the wave in air and glass present comparable values at equal frequencies, the curves being more regular in air (dielectric). The radiation patterns produced for air and glass are directional, with a large main lobe, which is narrower at 5 GHz. For copper, the wave propagation is quite uniform in space, and the radiation patterns show two main lobes with a much larger size at 2.6 GHz than at 5 GHz. The propagation medium would therefore influence the range of values of the gain of the antenna.
文摘The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculations and numerical analysis for the microstrip patch antennas. In this paper, two different designs have been modelled and analyzed and both designs are based on the rectangular patches. The feeding point of one design is inside the patch while the other design contains feeding point outside the patch is T shaped. The computational analysis showed some interesting results for radiation pattern and far field domain. For these designs, the characteristic impedance taken is 50 Ω and the operating frequency domain is 1.4 to 1.7 GHz. The microstrip patch antennas are encapsulated in the inert spherical atmosphere of 20 mm thickness containing air inside it.
文摘In recent years, several attempts have been made in designing planar array antennas with high directivity. This paper is aimed at investigating the impact of element spacing on the directivity of planar array of monopole antenna. The directivity of antenna with reduced grating lobes can be obtained by carefully varying the inter-element spacing of array antenna. Based on this conception, this paper presents the investigation carried out on the relationship between inter-element spacing and the directivity of planar array of monopole antenna. It went further to highlight the effect on the total fields radiated by the antenna. The inter-element spacing is one of the most important antenna parameters that determine the directivity of the antenna. For a planar array of monopole, the directivity can be improved by varying the inter-element spacing. Four elements uniform planar array antenna and Hadamard matrix method was used to determine element positioning in the array matrix. The simulated results obtained using Matlab, showed that good directivity was obtained by using element spacing between 0.1λ - 0.5λ. Increasing the spacing beyond 0.6λ - 1.0λ also improved the directivity, but generated many grating lobes. As inter-element spacing increased, the grating lobes increased in size, number and levels. The study, therefore, inferred that the best directivity (radiation pattern) can only be obtained when the element spacing is within 0.1 - 0.5λ.
