The effect of the addition of rare earths in Fe-based high chromium alloy powders on elements distribution in matrix materials and mechanical properties were studied. The results show that the addition of cerium can i...The effect of the addition of rare earths in Fe-based high chromium alloy powders on elements distribution in matrix materials and mechanical properties were studied. The results show that the addition of cerium can increase the chromium amount in carbonides and increase the micro-hardness after carbonization and the wear-resistant property of materials.展开更多
Data from Global Cancer Statistics show that breast cancer (BC) is the most common type of cancer among women, leading the number of deaths caused by cancer. The developments in diagnosis and treatment techniques for ...Data from Global Cancer Statistics show that breast cancer (BC) is the most common type of cancer among women, leading the number of deaths caused by cancer. The developments in diagnosis and treatment techniques for the BC, including chemotherapy and/or radiotherapy, increased the survival rates for this type of cancer. One late complication induced by BC treatment is the cardiotoxicity. This term comprises different cardiotoxic side effects, which include blood pressure alterations, myocardial ischemia, congestive heart failure and other damages. This study aimed to evaluate the cardiac alterations induced by radiotherapy and chemotherapy, simulating a treatment for BC in Wistar rats. It is, therefore, important to understand the mechanisms involved in the cardiotoxicity, in order to prevent women from this late effect, when they undergo BC treatments. The major interests in this work are in Low atomic weight elements as Sodium, because it is strongly related to cardiomyocyte contraction;Magnesium, because it is important in the cardiac metabolism;and Iron, because BC treatment induced cardiotoxicity can be associated to the oxidative stress. Changes that occur in unhealthy tissues in case to cardiovascular damages can be better understood when elemental compounds and structures of healthy tissues are known. Low Energy X-ray Fluorescence (LEXRF) technique was used to obtain elemental maps of low Z-elements providing a semi-quantitative analysis of the tissues evaluated under different conditions. Through the technique LEXRF we obtained elemental and absorption maps. The results showed more damages when associating chemotherapy and radiotherapy in comparison to myocardium healthy. Those images taken together with light microscopy, X-ray absorption and phase contrast images, satisfactorily characterize the cardiac tissue for the first time in the literature, from the structural and morphological points of view. LEXRF was carried out at TwinMic beamline in the ELETTRA Synchrotron Fa-cility, at the beamline TwinMic, in Trieste, Italy.展开更多
In conventional pulsed laser deposition (PLD) technique, plume deflection and composition distribution change with the laser incident direction and pulse energy, then causing uneven film thickness and composition di...In conventional pulsed laser deposition (PLD) technique, plume deflection and composition distribution change with the laser incident direction and pulse energy, then causing uneven film thickness and composition distribution for a multicomponent film and eventually leading to low device quality and low rate of final products. We present a novel method based on PLD for depositing large CIGS films with uni- form thickness and stoichiometry. By oscillating a mirror placed coaxially with the incident laser beam, the laser's focus is scanned across the rotating target surface. This arrangement maintains a constant re- flectance and optical distance, ensuring that a consistent energy density is delivered to the target surface by each laser pulse. Scanning the laser spot across the target suppresses the formation of micro-columns, and thus the plume deflection effect that reduces film uniformity in conventional PLD technique is eliminated. This coaxial scanning PLD method is used to deposit a CIGS film, 500 nm thick, with thickness uniformity exceeding ±3% within a 5 cm diameter, and exhibiting a highly homogeneous elemental distribution.展开更多
Phytolacca acinosa Roxb. (P acinosa) is a recently discovered manganese hyperaccumulator plant from southern China. It is a good candidate for phytoremediation of manganese(Mn) polluted soil for its high biomass a...Phytolacca acinosa Roxb. (P acinosa) is a recently discovered manganese hyperaccumulator plant from southern China. It is a good candidate for phytoremediation of manganese(Mn) polluted soil for its high biomass and fast growth. Knowledge of the tissue localization and identification of heavy metals can provide essential information on metal toxicity and bioaccumulation mechanisms. Synchrotron radiation X-ray fluorescence spectroscopy (SRXRF) microprobe was used in this study to investigate the cellular distributions of Mn and other elements in root, stem, leaf, petiole and midrib of P. acinosa. The highest Mn content was found in the vascular tissues of root, stem, petiole and midrib. Cortex in root played a key role in Mn absorption and Mn was limited in the vascular bundle during the process of transportation in stem. Moreover, Mn content in leaf epidermis was higher than that in mesophyll, which suggested that the sequestration of Mn in leaf epidermis might be one of the detoxification mechanisms of P. acinosa. The significance of other elemental (such as P, S, K, Ca, Fe, Zn and Cu) distribution patterns and the correlation with Mn were also discussed.展开更多
Carbon, manganese, and silicon distribution in quenching and partitioning (Q&P) steel during partitioning process was investigated to reveal the diffusion behavior. The microstructure and chemical composition were ...Carbon, manganese, and silicon distribution in quenching and partitioning (Q&P) steel during partitioning process was investigated to reveal the diffusion behavior. The microstructure and chemical composition were analyzed by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and three-dimensional atom probe. It is shown that the studied Q&P steel consisted of martensite laths and thin, film-like retained austenite showing extraordinary phase transformation stability. Carbon atoms mostly diffused to the retained austenite from martensite at a higher partitioning temperature. In the experimental steel partitioned at 400℃ for 10-60 s, carbides or cementite formed through carbon segregation along martensite boundaries or within the martensite matrix. As a result of carbon atom diffusion from martensite to austenite, the carbon content in martensite could be ignored. When the partitioning process completed, the constrained carbon equilibrium (CCE) could be simplified. Results calculated by the simplified CCE model were similar to those of CCE, and the difference between the two optimum quenching temperatures, where the maximum volume fraction of the retained austenite can be obtained by the Q&P process, was little.展开更多
The chemical composition of vanadium slag significantly affects its element distribution and phase composition,which affect the subsequent calcification roasting process and vanadium recovery.In this work,seven kinds ...The chemical composition of vanadium slag significantly affects its element distribution and phase composition,which affect the subsequent calcification roasting process and vanadium recovery.In this work,seven kinds of vanadium slags derived from different regions in China were used as the raw materials to study the effects of different components on the vanadium slag’s elements distribution,phase composition,calcification roasting,and leaching rate of major elements using scanning electron microscope,X-ray diffraction analysis,and inductively coupled plasma-optical emission spectroscopy.The results show that the spinel phase is wrapped with silicate phase in all vanadium slag samples.The main elements in the spinel phase are Cr,V,and Ti from the interior to the exterior.The size of spinel phase in low chromium vanadium slag is larger than the other vanadium slags with higher chromium contents.The spinel phase of high-calcium and high-phosphorus vanadium slag is more dispersed.The strongest diffraction peak of vanadium spinel phase in the vanadium slag migrates to a higher diffraction angle,and(Fe_(0.6)Cr_(0.4))_(2)O_(3)is formed after calcification roasting as the chromium content increased.A large amount of Ca_(2)SiO_(4)is produced because excess Ca reacts with Si in high-calcium and high-phosphorus vanadium slag.The vanadium leaching rate reaches 88%in some vanadium slags.The chromium leaching rate is less than 5%in all vanadium slags.The silicon leaching rate of high-calcium and high-phosphorus vanadium slag is much higher than that of the other slags.The leaching rate of manganese is higher than 10%,and the leaching rates of iron and titanium are negligible.展开更多
The distribution of titanium,carbon and associated elements(calcium,magnesium,silicon and aluminum)in a smelting process is studied by means of a chemical equilibrium calculation method for multiphase and multicompone...The distribution of titanium,carbon and associated elements(calcium,magnesium,silicon and aluminum)in a smelting process is studied by means of a chemical equilibrium calculation method for multiphase and multicomponent systems,and verified through comparison with production results.In particular,using the coexistence theory for titanium slag structures,the influence of the AIR(anthracite to ilmenite ratio)on the distribution of such elements is analyzed.The results show that the AIR can be adjusted to achieve a selective reduction of oxides in the melt.展开更多
The effect of fertilizer application on biomass dry weight and element distribution of various organs of maize was investigated from the aspect of microscopic view to disclose the internal mechanism of fertilizer effe...The effect of fertilizer application on biomass dry weight and element distribution of various organs of maize was investigated from the aspect of microscopic view to disclose the internal mechanism of fertilizer effect on crop. Five fertilizer treatments: no fertilizer (CK), nitrogen phosphorus fertilizer (NP), nitrogen potassium fertilizer (NK), phosphorus potassium (PK), and nitrogen phosphorus potassium fertilizer (NPK) were designed. Field experiment on the response of biomass dry weight and N, P, K, Cu, Zn, Fe, and Mn element distribution of stem, leaf and seed of maize (Zea mays L.) to different fertilizer treatments application was carried out. The results showed that dry weight and element content of various organs of maize were different. N content of various organs followed this order leaf〉 seed 〉 stem; P content of various organs was seed 〉 leaf〉 stem; K content was stem 〉 leaf〉 seed; and Fe content was leaf〉 stem 〉 seed. Fertilizer application reduced the differences of N, P, K, and Fe contents of various organs, and changed the size order of the dry weight and the Cu and Zn contents of leaf, seed and stem. Except for individual treatment, the response direction of N, P and Fe elements to fertilizer application was similar to Cu and Zn. The response of element content of various organs of maize to different fertilizer combinations was also different. The response extent of N, P and K major elements to fertilizer application was larger than microelement of Cu, Zn, Fe, and Mn; the response extent of stem and leaf was larger than seed; the response to NPK fertilizer treatment was bigger than NP, NK and PK. In the whole, response differences of element distribution to various fertilizer treatments were not remarkable. Besides, element distribution of various organs of maize was also influenced by the mutual effect of fertilizer varieties. The response direction and extent of various element distributions to different fertilizer treatments had both similarities and differences. Adjusting fertilizer application could change the biomass dry weight and element distribution of various organs of maize, thus promote the uptake and cycle of nutrient. This investigation could provide useful information for high production.展开更多
Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of bette...Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of better measures of femoral strength using the clinically展开更多
In this study,we isolated and cultured phytoplankton along the coast of China and measured the cellular carbon,nitrogen,and sulfur contents under four temperatures.The results showed that the contents of the cellular ...In this study,we isolated and cultured phytoplankton along the coast of China and measured the cellular carbon,nitrogen,and sulfur contents under four temperatures.The results showed that the contents of the cellular elements varied widely among different phytoplankton.We found that temperature is one of the important factors affecting the carbon,nitrogen,and sulfur contents in phytoplankton cells;however,the degree of influence of temperature is different for different kinds of phytoplankton.By measuring the nitrogen content in cells,we found that the C:N ratio indirectly measured in the experiment fluctuated in the range of 3.50-8.97,and the average C:N ratio was 5.52.In this experiment,we accurately measured the cell elemental contents at different temperatures and transformed the cell count results into carbon,nitrogen,and sulfur contents to express the biomass.This method ensures that the contribution of species that are small in number but with a large cell volume in biomass is considered.Moreover,this method comprehensively considers the interspecific differences of species and the uneven distribution of elements in phytoplankton cells,which is of significance in the estimation of marine carbon and nitrogen budget.The distribution of nitrogen content in marine phytoplankton can well indicate the marine eutrophication caused by human activities.Climate change can affect the community structure and element composition of marine phytoplankton,meanwhile marine carbon and nitrogen element can regulate the climate to a certain extent.展开更多
Ambient coarse particles (diameter 1.8-10 μm), fine particles (diameter 0.1-1.8 μm), and ultrafine particles (diameter 〈 0.1 μm) in the atmosphere of the city of Shanghai were sampled during the summer of 20...Ambient coarse particles (diameter 1.8-10 μm), fine particles (diameter 0.1-1.8 μm), and ultrafine particles (diameter 〈 0.1 μm) in the atmosphere of the city of Shanghai were sampled during the summer of 2008 (from Aug 27 to Sep 08). Microscopic characterization of the particles was investigated by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDX). Mass concentrations of Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, Sr, and Pb in the size-resolved particles were quantified by using synchrotron radiation X-ray fluorescence (SRXRF). Source apportionment of the chemical elements was analyzed by means of an enrichment factor method. Our results showed that the average mass concentrations of coarse particles, fine particles and ultrafine particles in the summer air were 9.38 ± 2.18, 8.82 ± 3.52, and 2.02 ± 0.41 μg/m3, respectively. The mass percentage of the fine particles accounted for 51.47% in the total mass of PM10, indicating that fine particles are the major component in the Shanghai ambient particles. SEM/EDX results showed that the coarse particles were dominated by minerals, fine particles by soot aggregates and fly ashes, and ultrafine particles by soot particles and unidentified particles. SRXRF results demonstrated that crustal elements were mainly distributed in the coarse particles, while heavy metals were in higher proportions in the fine particles. Source apportionment revealed that Si, K, Ca, Fe, Mn, Rb, and Sr were from crustal sources, and S, Cl, Cu, Zn, As, Se, Br, and Pb from anthropogenic sources. Levels of P, V, Cr, and Ni in particles might be contributed from multi-sources, and need further investigation.展开更多
In 1999 aerosol samples were collected by cascade at Meteorological Tower in Beijing. The 12 group aerosol samples obtained were analyzed using PIXE method, which resulted in 20 elemental concentrations and size dist...In 1999 aerosol samples were collected by cascade at Meteorological Tower in Beijing. The 12 group aerosol samples obtained were analyzed using PIXE method, which resulted in 20 elemental concentrations and size distribution of elemental concentrations. From the observation, the elemental concentrations, size distribution of elemental concentrations and their variations are analyzed. It shows that concentrations of the most elements in aerosols increase greatly compared with those in the past except that the concentrations of V, K, Sr, and the source of aerosols has changed greatly in the past decade. Fine mode aerosols increase more rapidly in the past decade, which may be due to the contribution of coal combustion and automobile exhaust. Pb content in aerosol is much higher than that at the beginning of 1980s, and has a decreasing trend in recent years because of using non leaded gasoline.展开更多
Although the Mehdiabad zinc-lead deposit is one of the most well-known deposits in the central Iran structural zone,the genesis of the deposit remains controversial.The host rock of the ore is a dolomitic limestone of...Although the Mehdiabad zinc-lead deposit is one of the most well-known deposits in the central Iran structural zone,the genesis of the deposit remains controversial.The host rock of the ore is a dolomitic limestone of the Lower Cretaceous Taft Formation.In the two main orebodies of the deposit,which includes the Black Hill and East Ridge ore zones,the oxide and sulfide ores are observed at the surface and at depth,respectively.The elements Zn,Fe,Mn and Mg are more abundant in the East Ridge ore zone(in both sulfide and oxide ores),with Ba,Pb,Ag and Cu being more abundant in the Black Hill oxide ore.Based on the distribution of elements and their correlation with each other in these ore zones,the elements are divided into three general groups,that of terrigenous elements,chemically-deposited elements and oreforming(hydrothermally deposited)elements,a division that is supported by the results of factor analyses.The spatial distribution of elements is jointly affected by contact with host rocks,the boundary of oxide-sulfide ores and fault zones.The main factors governing the distribution of elements are the mechanical transfer of detrital sediments,chemical sedimentation,transfer by hydrothermal fluids,oxidation and surface dissolution,all of which affected the spatial distribution of elements.The ore-forming elements are mostly affected by hydrothermal fluids and oxidation.This study not only provides additional information about the genesis of the Mehdiabad deposit,but also could assist in the exploitation of ore and further exploration purposes.The results of this study can aid in the exploration and exploitation of the Mehdiabad deposit and similar deposits in the region.展开更多
The migration,accumulation and dispersion of elements caused by tectonic dynamics have always been a focus of attention,and become the basis of tectono-geochemistry.However,the effects of faulting,especially strike-sl...The migration,accumulation and dispersion of elements caused by tectonic dynamics have always been a focus of attention,and become the basis of tectono-geochemistry.However,the effects of faulting,especially strike-slip faulting,on the adjustment of geochemical element distribution,are still not clear.In this paper,we select the West Junggar Orogenic Belt(WJOB),NW China,as a case study to test the migration behavior of elements under tectonic dynamics.The WJOB is dominated by NE-trending large-scale sinistral strike-slip faults such as the Darabut Fault,the Mayile Fault,and the Baerluke Fault,which formed during the intracontinental adjustment under N-S compression during ocean-continental conversion in the Late Paleozoic.Geochemical maps of 13 elements,Al,W,Sn,Mo,Cu,Pb,Zn,As,Sb,Hg,Fe,Ni,and Au,are analyzed for the effects of faulting and folding on element distribution at the regional scale.The results show that the element distribution in the WJOB is controlled mainly by two mechanisms during tectonic deformation:first is the material transporting mechanism,where the movement of geological units is consistent with the direction of tectonic movement;second is the diffusion mechanism,especially by tectonic pressure dissolution driven by tectonic dynamics,where the migration of elements is approximately perpendicular or opposite to the direction of tectonic movement.We conclude that the adjustment of element distributions has been determined by the combined actions of transporting and diffusion mechanisms,and that the diffusion mechanism plays an important role in the formation of geochemical Au blocks in the WJOB.展开更多
In this paper,an effective method of simulating the spatial distribution of climatic elements in mountainous areas by using the semi-empirical theory is presented.As an example,the spatial distributions of temperature...In this paper,an effective method of simulating the spatial distribution of climatic elements in mountainous areas by using the semi-empirical theory is presented.As an example,the spatial distributions of temperature, vapor pressure,relative humidity,wind speed and precipitation in the Jianyang region and the Shaxi basin of Fujian Province are computed with this method,and the simulated results are in good agreement with the observations.展开更多
The distributed optical fiber sensing technology was used to investigate the fracture behavior of the Epoxy Asphalt Mixture. The spatial distribution and variation of the strain development with crack propagation were...The distributed optical fiber sensing technology was used to investigate the fracture behavior of the Epoxy Asphalt Mixture. The spatial distribution and variation of the strain development with crack propagation were acquired using the brillouin optical time-domain reflectometer through the loading experiments of the composite beam structure. In addition, a finite element model of the composite beam structure was developed to analyze the mechanical responses of the epoxy asphalt mixture using the extended finite element method. The experimental results show that the development of crack propagation becomes instable with the increase of the load, and larger loads will generate deeper cracks. Moreover, the numerical results show that the mechanical response of the crack tip changes with the crack propagation, and the worst areas that subjected to crack damage are located on both sides of the composite beam structure.展开更多
Copper gangue (CG), containing a large amount of water with grain sizes of 0.037 to 0.10mm,is an inactive industrial waste generated from copper refineries. When it is dried and used as a cement admixture, the inf...Copper gangue (CG), containing a large amount of water with grain sizes of 0.037 to 0.10mm,is an inactive industrial waste generated from copper refineries. When it is dried and used as a cement admixture, the influence of the presence of finely dispersed metallic particles in CG on the microstructure and compressive strength of cement paste has been studied.The results show that the higher the replacement of CG is,the lower the compressive strength of cement mortar is.However,the long-term strength of the specimens with 10% CG,especially after being cured for 3 months,approached to that of the plain mortar.Its mechanism was studied by an electron probe X-ray microanalyzer (EPXMA).The results indicate that a small quantity of Fe(OH) 3·nH 2O slowly formed from Fe 2O 3 in the presence of Ca(OH) 2, free CaO and MgO of the clinker also slowly hydrated and formed Ca(OH) 2 and Mg(OH) 2 respectively,so the hardened cement paste became more compact.展开更多
Abstract: In this paper a nonlinear dynamic model for the distribution of element content and mineralization in the crust is suggested and the iteration relationship formula of this model coincides with the logistic e...Abstract: In this paper a nonlinear dynamic model for the distribution of element content and mineralization in the crust is suggested and the iteration relationship formula of this model coincides with the logistic equation. This shows that mineralization related with migration and enrichment of elements is in chaos, thus resulting in fractal structures of element content and ore reserves and their spatial distribution in the crust.展开更多
A multidisciplinary study of the sedimentology, geochemistry and mineralogy has been conducted to understand the linkage between marsh and alluvial sediments and also their potential sources in Eynak marsh, North of I...A multidisciplinary study of the sedimentology, geochemistry and mineralogy has been conducted to understand the linkage between marsh and alluvial sediments and also their potential sources in Eynak marsh, North of Iran. The influence of the upstream potential sources on recent sediment geochemistry has been discussed based on geochemical, sedimentological and mineralogical results. A spatial grain size distribution study was carried out to investigate the hydrodynamic and deposition system of the marsh. So, the surficial sediment sampling was carried out to describe the sedimentological parameters and elemental geochemistry of sediments in Eynak marsh. Mineralogical complexes are mainly made up of felsic minerals such as quartz, calcite, feldspar, pyrite, mica, and clay minerals (in very low values) indicated by high amounts of Al, Ca, and Ni. As expected, the mineralogy of sediments is controlled mainly by the rock formations. Also sediment textures are controlled by the hydrodynamic condition in the marsh. So its distribution has been influenced by distance from the entrance sediments to Eynak marsh. The results showed that there are no enrichments related to fine grain sediment distributions. An association of Al with the trace elements such as Sc, Y, La, Ce, and Zr indicates that their distributions are mainly controlled by the felsic rocks in the upstream. On the other side, due to the waste water entrance to the marsh, Ni and Pb concentration could be under the effects of anthropogenic activities around the marsh. Results represented high values for Mn concentration (min 462, max 1784 and average 1037 ppm) and it showed a significant correlation with Ca, Sr, and Mg. A redox habitat and constantly calm hydrodynamic circumstance in the study area, likely cause high concentration of Ca, Sr, and Mg, and Mn. And they are representing negative correlations with some elements such as Al, Be, Fe, K, and Na.展开更多
This paper presents the stress incremental rate of each element by using finite element numerical simulation way.Combined with the practical continent boundary condition and medium parameters, this paper applies the s...This paper presents the stress incremental rate of each element by using finite element numerical simulation way.Combined with the practical continent boundary condition and medium parameters, this paper applies the stress increment rate to the more practical modified cell automaton model according to the cell automaton principle. The paper preliminarily gives the more practical seismic space-time repeated evolutive maps, and compares the imitative seismic energy release with the real seismic energy release. It is thought that this model has its advantageover the old one whether in the seismic imitative characteristics or in the comparison with the realsituation and is more practical model.展开更多
文摘The effect of the addition of rare earths in Fe-based high chromium alloy powders on elements distribution in matrix materials and mechanical properties were studied. The results show that the addition of cerium can increase the chromium amount in carbonides and increase the micro-hardness after carbonization and the wear-resistant property of materials.
文摘Data from Global Cancer Statistics show that breast cancer (BC) is the most common type of cancer among women, leading the number of deaths caused by cancer. The developments in diagnosis and treatment techniques for the BC, including chemotherapy and/or radiotherapy, increased the survival rates for this type of cancer. One late complication induced by BC treatment is the cardiotoxicity. This term comprises different cardiotoxic side effects, which include blood pressure alterations, myocardial ischemia, congestive heart failure and other damages. This study aimed to evaluate the cardiac alterations induced by radiotherapy and chemotherapy, simulating a treatment for BC in Wistar rats. It is, therefore, important to understand the mechanisms involved in the cardiotoxicity, in order to prevent women from this late effect, when they undergo BC treatments. The major interests in this work are in Low atomic weight elements as Sodium, because it is strongly related to cardiomyocyte contraction;Magnesium, because it is important in the cardiac metabolism;and Iron, because BC treatment induced cardiotoxicity can be associated to the oxidative stress. Changes that occur in unhealthy tissues in case to cardiovascular damages can be better understood when elemental compounds and structures of healthy tissues are known. Low Energy X-ray Fluorescence (LEXRF) technique was used to obtain elemental maps of low Z-elements providing a semi-quantitative analysis of the tissues evaluated under different conditions. Through the technique LEXRF we obtained elemental and absorption maps. The results showed more damages when associating chemotherapy and radiotherapy in comparison to myocardium healthy. Those images taken together with light microscopy, X-ray absorption and phase contrast images, satisfactorily characterize the cardiac tissue for the first time in the literature, from the structural and morphological points of view. LEXRF was carried out at TwinMic beamline in the ELETTRA Synchrotron Fa-cility, at the beamline TwinMic, in Trieste, Italy.
基金supported by the Shenzhen Basic Research Project of Science and Technology under Grant No.JCYJ20120613112423982
文摘In conventional pulsed laser deposition (PLD) technique, plume deflection and composition distribution change with the laser incident direction and pulse energy, then causing uneven film thickness and composition distribution for a multicomponent film and eventually leading to low device quality and low rate of final products. We present a novel method based on PLD for depositing large CIGS films with uni- form thickness and stoichiometry. By oscillating a mirror placed coaxially with the incident laser beam, the laser's focus is scanned across the rotating target surface. This arrangement maintains a constant re- flectance and optical distance, ensuring that a consistent energy density is delivered to the target surface by each laser pulse. Scanning the laser spot across the target suppresses the formation of micro-columns, and thus the plume deflection effect that reduces film uniformity in conventional PLD technique is eliminated. This coaxial scanning PLD method is used to deposit a CIGS film, 500 nm thick, with thickness uniformity exceeding ±3% within a 5 cm diameter, and exhibiting a highly homogeneous elemental distribution.
文摘Phytolacca acinosa Roxb. (P acinosa) is a recently discovered manganese hyperaccumulator plant from southern China. It is a good candidate for phytoremediation of manganese(Mn) polluted soil for its high biomass and fast growth. Knowledge of the tissue localization and identification of heavy metals can provide essential information on metal toxicity and bioaccumulation mechanisms. Synchrotron radiation X-ray fluorescence spectroscopy (SRXRF) microprobe was used in this study to investigate the cellular distributions of Mn and other elements in root, stem, leaf, petiole and midrib of P. acinosa. The highest Mn content was found in the vascular tissues of root, stem, petiole and midrib. Cortex in root played a key role in Mn absorption and Mn was limited in the vascular bundle during the process of transportation in stem. Moreover, Mn content in leaf epidermis was higher than that in mesophyll, which suggested that the sequestration of Mn in leaf epidermis might be one of the detoxification mechanisms of P. acinosa. The significance of other elemental (such as P, S, K, Ca, Fe, Zn and Cu) distribution patterns and the correlation with Mn were also discussed.
基金the National Natural Science Foundation of China(No.50804005)the Special Fund from the Central Collegiate Basic Scien-tifc Research Bursary of China(No.FRF-TP-11-005B)
文摘Carbon, manganese, and silicon distribution in quenching and partitioning (Q&P) steel during partitioning process was investigated to reveal the diffusion behavior. The microstructure and chemical composition were analyzed by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and three-dimensional atom probe. It is shown that the studied Q&P steel consisted of martensite laths and thin, film-like retained austenite showing extraordinary phase transformation stability. Carbon atoms mostly diffused to the retained austenite from martensite at a higher partitioning temperature. In the experimental steel partitioned at 400℃ for 10-60 s, carbides or cementite formed through carbon segregation along martensite boundaries or within the martensite matrix. As a result of carbon atom diffusion from martensite to austenite, the carbon content in martensite could be ignored. When the partitioning process completed, the constrained carbon equilibrium (CCE) could be simplified. Results calculated by the simplified CCE model were similar to those of CCE, and the difference between the two optimum quenching temperatures, where the maximum volume fraction of the retained austenite can be obtained by the Q&P process, was little.
基金financially supported by the National Natural Science Foundation of China (No. 51874077)the Opening Foundation of State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization, China (No. 2019P4FZG00A)
文摘The chemical composition of vanadium slag significantly affects its element distribution and phase composition,which affect the subsequent calcification roasting process and vanadium recovery.In this work,seven kinds of vanadium slags derived from different regions in China were used as the raw materials to study the effects of different components on the vanadium slag’s elements distribution,phase composition,calcification roasting,and leaching rate of major elements using scanning electron microscope,X-ray diffraction analysis,and inductively coupled plasma-optical emission spectroscopy.The results show that the spinel phase is wrapped with silicate phase in all vanadium slag samples.The main elements in the spinel phase are Cr,V,and Ti from the interior to the exterior.The size of spinel phase in low chromium vanadium slag is larger than the other vanadium slags with higher chromium contents.The spinel phase of high-calcium and high-phosphorus vanadium slag is more dispersed.The strongest diffraction peak of vanadium spinel phase in the vanadium slag migrates to a higher diffraction angle,and(Fe_(0.6)Cr_(0.4))_(2)O_(3)is formed after calcification roasting as the chromium content increased.A large amount of Ca_(2)SiO_(4)is produced because excess Ca reacts with Si in high-calcium and high-phosphorus vanadium slag.The vanadium leaching rate reaches 88%in some vanadium slags.The chromium leaching rate is less than 5%in all vanadium slags.The silicon leaching rate of high-calcium and high-phosphorus vanadium slag is much higher than that of the other slags.The leaching rate of manganese is higher than 10%,and the leaching rates of iron and titanium are negligible.
基金This work was financially supported by“High-Level Youth Talent Special Support Plan”of Kunming City(C202014002)the National Natural Science Foundation of China(51904137)+3 种基金the Applied Basic Research Projects of Yunnan Province(2019FD044)the Open Projects of State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization(CNMRCUKF1905)the Talent Training Project of Kunming University(YJL2102)The authors are grateful to NSFC and“High-Level Talent Special Support Plan”of Kunming City(C201905002).
文摘The distribution of titanium,carbon and associated elements(calcium,magnesium,silicon and aluminum)in a smelting process is studied by means of a chemical equilibrium calculation method for multiphase and multicomponent systems,and verified through comparison with production results.In particular,using the coexistence theory for titanium slag structures,the influence of the AIR(anthracite to ilmenite ratio)on the distribution of such elements is analyzed.The results show that the AIR can be adjusted to achieve a selective reduction of oxides in the melt.
基金supported by the National Basic ResearchProgram of China (2007CB109300)
文摘The effect of fertilizer application on biomass dry weight and element distribution of various organs of maize was investigated from the aspect of microscopic view to disclose the internal mechanism of fertilizer effect on crop. Five fertilizer treatments: no fertilizer (CK), nitrogen phosphorus fertilizer (NP), nitrogen potassium fertilizer (NK), phosphorus potassium (PK), and nitrogen phosphorus potassium fertilizer (NPK) were designed. Field experiment on the response of biomass dry weight and N, P, K, Cu, Zn, Fe, and Mn element distribution of stem, leaf and seed of maize (Zea mays L.) to different fertilizer treatments application was carried out. The results showed that dry weight and element content of various organs of maize were different. N content of various organs followed this order leaf〉 seed 〉 stem; P content of various organs was seed 〉 leaf〉 stem; K content was stem 〉 leaf〉 seed; and Fe content was leaf〉 stem 〉 seed. Fertilizer application reduced the differences of N, P, K, and Fe contents of various organs, and changed the size order of the dry weight and the Cu and Zn contents of leaf, seed and stem. Except for individual treatment, the response direction of N, P and Fe elements to fertilizer application was similar to Cu and Zn. The response of element content of various organs of maize to different fertilizer combinations was also different. The response extent of N, P and K major elements to fertilizer application was larger than microelement of Cu, Zn, Fe, and Mn; the response extent of stem and leaf was larger than seed; the response to NPK fertilizer treatment was bigger than NP, NK and PK. In the whole, response differences of element distribution to various fertilizer treatments were not remarkable. Besides, element distribution of various organs of maize was also influenced by the mutual effect of fertilizer varieties. The response direction and extent of various element distributions to different fertilizer treatments had both similarities and differences. Adjusting fertilizer application could change the biomass dry weight and element distribution of various organs of maize, thus promote the uptake and cycle of nutrient. This investigation could provide useful information for high production.
基金supported by The HongKong Polytechnic University Research Grants(No.1-BB81)grants from National Natural Science Foundation of China,Nos.10872078 and 10832012
文摘Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of better measures of femoral strength using the clinically
基金supported by the National Natural Science Foundation of China-Shandong Joint Foundation(No.U1806211)。
文摘In this study,we isolated and cultured phytoplankton along the coast of China and measured the cellular carbon,nitrogen,and sulfur contents under four temperatures.The results showed that the contents of the cellular elements varied widely among different phytoplankton.We found that temperature is one of the important factors affecting the carbon,nitrogen,and sulfur contents in phytoplankton cells;however,the degree of influence of temperature is different for different kinds of phytoplankton.By measuring the nitrogen content in cells,we found that the C:N ratio indirectly measured in the experiment fluctuated in the range of 3.50-8.97,and the average C:N ratio was 5.52.In this experiment,we accurately measured the cell elemental contents at different temperatures and transformed the cell count results into carbon,nitrogen,and sulfur contents to express the biomass.This method ensures that the contribution of species that are small in number but with a large cell volume in biomass is considered.Moreover,this method comprehensively considers the interspecific differences of species and the uneven distribution of elements in phytoplankton cells,which is of significance in the estimation of marine carbon and nitrogen budget.The distribution of nitrogen content in marine phytoplankton can well indicate the marine eutrophication caused by human activities.Climate change can affect the community structure and element composition of marine phytoplankton,meanwhile marine carbon and nitrogen element can regulate the climate to a certain extent.
基金supported by the National Natural Science Foundation of China (No. 10775094, 40973072,41073073)the Shanghai Pujiang Talent Program,the Shanghai Committee of Science and Technology (No.10JC1405500)+1 种基金the Innovation Program of Shanghai Municipal Education Commission (No. 11ZZ80)the Shanghai Leading Academic Discipline Project (No.S30109)
文摘Ambient coarse particles (diameter 1.8-10 μm), fine particles (diameter 0.1-1.8 μm), and ultrafine particles (diameter 〈 0.1 μm) in the atmosphere of the city of Shanghai were sampled during the summer of 2008 (from Aug 27 to Sep 08). Microscopic characterization of the particles was investigated by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDX). Mass concentrations of Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, Sr, and Pb in the size-resolved particles were quantified by using synchrotron radiation X-ray fluorescence (SRXRF). Source apportionment of the chemical elements was analyzed by means of an enrichment factor method. Our results showed that the average mass concentrations of coarse particles, fine particles and ultrafine particles in the summer air were 9.38 ± 2.18, 8.82 ± 3.52, and 2.02 ± 0.41 μg/m3, respectively. The mass percentage of the fine particles accounted for 51.47% in the total mass of PM10, indicating that fine particles are the major component in the Shanghai ambient particles. SEM/EDX results showed that the coarse particles were dominated by minerals, fine particles by soot aggregates and fly ashes, and ultrafine particles by soot particles and unidentified particles. SRXRF results demonstrated that crustal elements were mainly distributed in the coarse particles, while heavy metals were in higher proportions in the fine particles. Source apportionment revealed that Si, K, Ca, Fe, Mn, Rb, and Sr were from crustal sources, and S, Cl, Cu, Zn, As, Se, Br, and Pb from anthropogenic sources. Levels of P, V, Cr, and Ni in particles might be contributed from multi-sources, and need further investigation.
文摘In 1999 aerosol samples were collected by cascade at Meteorological Tower in Beijing. The 12 group aerosol samples obtained were analyzed using PIXE method, which resulted in 20 elemental concentrations and size distribution of elemental concentrations. From the observation, the elemental concentrations, size distribution of elemental concentrations and their variations are analyzed. It shows that concentrations of the most elements in aerosols increase greatly compared with those in the past except that the concentrations of V, K, Sr, and the source of aerosols has changed greatly in the past decade. Fine mode aerosols increase more rapidly in the past decade, which may be due to the contribution of coal combustion and automobile exhaust. Pb content in aerosol is much higher than that at the beginning of 1980s, and has a decreasing trend in recent years because of using non leaded gasoline.
文摘Although the Mehdiabad zinc-lead deposit is one of the most well-known deposits in the central Iran structural zone,the genesis of the deposit remains controversial.The host rock of the ore is a dolomitic limestone of the Lower Cretaceous Taft Formation.In the two main orebodies of the deposit,which includes the Black Hill and East Ridge ore zones,the oxide and sulfide ores are observed at the surface and at depth,respectively.The elements Zn,Fe,Mn and Mg are more abundant in the East Ridge ore zone(in both sulfide and oxide ores),with Ba,Pb,Ag and Cu being more abundant in the Black Hill oxide ore.Based on the distribution of elements and their correlation with each other in these ore zones,the elements are divided into three general groups,that of terrigenous elements,chemically-deposited elements and oreforming(hydrothermally deposited)elements,a division that is supported by the results of factor analyses.The spatial distribution of elements is jointly affected by contact with host rocks,the boundary of oxide-sulfide ores and fault zones.The main factors governing the distribution of elements are the mechanical transfer of detrital sediments,chemical sedimentation,transfer by hydrothermal fluids,oxidation and surface dissolution,all of which affected the spatial distribution of elements.The ore-forming elements are mostly affected by hydrothermal fluids and oxidation.This study not only provides additional information about the genesis of the Mehdiabad deposit,but also could assist in the exploitation of ore and further exploration purposes.The results of this study can aid in the exploration and exploitation of the Mehdiabad deposit and similar deposits in the region.
基金Financial support from the National Key Research and Development Program of China(the DREAM-Deep Resource Exploration and Advanced Mininggrant No.2018YFC0603701)the China Geological Survey(grant Nos.DD20160083 and DD20190011)。
文摘The migration,accumulation and dispersion of elements caused by tectonic dynamics have always been a focus of attention,and become the basis of tectono-geochemistry.However,the effects of faulting,especially strike-slip faulting,on the adjustment of geochemical element distribution,are still not clear.In this paper,we select the West Junggar Orogenic Belt(WJOB),NW China,as a case study to test the migration behavior of elements under tectonic dynamics.The WJOB is dominated by NE-trending large-scale sinistral strike-slip faults such as the Darabut Fault,the Mayile Fault,and the Baerluke Fault,which formed during the intracontinental adjustment under N-S compression during ocean-continental conversion in the Late Paleozoic.Geochemical maps of 13 elements,Al,W,Sn,Mo,Cu,Pb,Zn,As,Sb,Hg,Fe,Ni,and Au,are analyzed for the effects of faulting and folding on element distribution at the regional scale.The results show that the element distribution in the WJOB is controlled mainly by two mechanisms during tectonic deformation:first is the material transporting mechanism,where the movement of geological units is consistent with the direction of tectonic movement;second is the diffusion mechanism,especially by tectonic pressure dissolution driven by tectonic dynamics,where the migration of elements is approximately perpendicular or opposite to the direction of tectonic movement.We conclude that the adjustment of element distributions has been determined by the combined actions of transporting and diffusion mechanisms,and that the diffusion mechanism plays an important role in the formation of geochemical Au blocks in the WJOB.
基金Projects are supported by the Science Fund of the Institution of Higher Learning.
文摘In this paper,an effective method of simulating the spatial distribution of climatic elements in mountainous areas by using the semi-empirical theory is presented.As an example,the spatial distributions of temperature, vapor pressure,relative humidity,wind speed and precipitation in the Jianyang region and the Shaxi basin of Fujian Province are computed with this method,and the simulated results are in good agreement with the observations.
基金Funded by the National Natural Science Foundation of China(No.51178114)the Fundamental Research Funds for the Central Universities(No.CXLX12_0117)the Scientifi c Research Foundation of Graduate School of Southeast University(No.YBJJ1318)
文摘The distributed optical fiber sensing technology was used to investigate the fracture behavior of the Epoxy Asphalt Mixture. The spatial distribution and variation of the strain development with crack propagation were acquired using the brillouin optical time-domain reflectometer through the loading experiments of the composite beam structure. In addition, a finite element model of the composite beam structure was developed to analyze the mechanical responses of the epoxy asphalt mixture using the extended finite element method. The experimental results show that the development of crack propagation becomes instable with the increase of the load, and larger loads will generate deeper cracks. Moreover, the numerical results show that the mechanical response of the crack tip changes with the crack propagation, and the worst areas that subjected to crack damage are located on both sides of the composite beam structure.
文摘Copper gangue (CG), containing a large amount of water with grain sizes of 0.037 to 0.10mm,is an inactive industrial waste generated from copper refineries. When it is dried and used as a cement admixture, the influence of the presence of finely dispersed metallic particles in CG on the microstructure and compressive strength of cement paste has been studied.The results show that the higher the replacement of CG is,the lower the compressive strength of cement mortar is.However,the long-term strength of the specimens with 10% CG,especially after being cured for 3 months,approached to that of the plain mortar.Its mechanism was studied by an electron probe X-ray microanalyzer (EPXMA).The results indicate that a small quantity of Fe(OH) 3·nH 2O slowly formed from Fe 2O 3 in the presence of Ca(OH) 2, free CaO and MgO of the clinker also slowly hydrated and formed Ca(OH) 2 and Mg(OH) 2 respectively,so the hardened cement paste became more compact.
基金This Research was supported by the Zhejiang Provincial National Science Foundation of China and Transcentury Talents Foundation of M.G. M.R. of China.
文摘Abstract: In this paper a nonlinear dynamic model for the distribution of element content and mineralization in the crust is suggested and the iteration relationship formula of this model coincides with the logistic equation. This shows that mineralization related with migration and enrichment of elements is in chaos, thus resulting in fractal structures of element content and ore reserves and their spatial distribution in the crust.
文摘A multidisciplinary study of the sedimentology, geochemistry and mineralogy has been conducted to understand the linkage between marsh and alluvial sediments and also their potential sources in Eynak marsh, North of Iran. The influence of the upstream potential sources on recent sediment geochemistry has been discussed based on geochemical, sedimentological and mineralogical results. A spatial grain size distribution study was carried out to investigate the hydrodynamic and deposition system of the marsh. So, the surficial sediment sampling was carried out to describe the sedimentological parameters and elemental geochemistry of sediments in Eynak marsh. Mineralogical complexes are mainly made up of felsic minerals such as quartz, calcite, feldspar, pyrite, mica, and clay minerals (in very low values) indicated by high amounts of Al, Ca, and Ni. As expected, the mineralogy of sediments is controlled mainly by the rock formations. Also sediment textures are controlled by the hydrodynamic condition in the marsh. So its distribution has been influenced by distance from the entrance sediments to Eynak marsh. The results showed that there are no enrichments related to fine grain sediment distributions. An association of Al with the trace elements such as Sc, Y, La, Ce, and Zr indicates that their distributions are mainly controlled by the felsic rocks in the upstream. On the other side, due to the waste water entrance to the marsh, Ni and Pb concentration could be under the effects of anthropogenic activities around the marsh. Results represented high values for Mn concentration (min 462, max 1784 and average 1037 ppm) and it showed a significant correlation with Ca, Sr, and Mg. A redox habitat and constantly calm hydrodynamic circumstance in the study area, likely cause high concentration of Ca, Sr, and Mg, and Mn. And they are representing negative correlations with some elements such as Al, Be, Fe, K, and Na.
文摘This paper presents the stress incremental rate of each element by using finite element numerical simulation way.Combined with the practical continent boundary condition and medium parameters, this paper applies the stress increment rate to the more practical modified cell automaton model according to the cell automaton principle. The paper preliminarily gives the more practical seismic space-time repeated evolutive maps, and compares the imitative seismic energy release with the real seismic energy release. It is thought that this model has its advantageover the old one whether in the seismic imitative characteristics or in the comparison with the realsituation and is more practical model.