Today, the number of embedded system was applied in the field of automation and control has far exceeded a variety of general-purpose computer. Embedded system is gradually penetrated into all fields of human society,...Today, the number of embedded system was applied in the field of automation and control has far exceeded a variety of general-purpose computer. Embedded system is gradually penetrated into all fields of human society, and ubiquitous embedded applications constitute the 'ubiquitous' computing era. Embedded operating system is the core of the em-bedded system, and it directly affects the performance of the whole system. Our Liaoning Provincial Key Laboratory of Embedded Technology has successfully developed five kinds of device-level embedded operating systems by more than ten years’ efforts, and these systems are Webit 5.0, Worix, μKernel, iDCX 128 and μc/os-II 128. This paper mainly analyses and compares the implementation mechanism and performance of these five kinds of device-level embedded operating systems in detail.展开更多
This paper describes specific constraints of vision systems that are dedicated to be embedded in mobile robots. If PC-based hardware architecture is convenient in this field because of its versatility, flexibility, pe...This paper describes specific constraints of vision systems that are dedicated to be embedded in mobile robots. If PC-based hardware architecture is convenient in this field because of its versatility, flexibility, performance, and cost, current real-time operating systems are not completely adapted to long processing with varying duration, and it is often necessary to oversize the system to guarantee fail-safe functioning. Also, interactions with other robotic tasks having more priority are difficult to handle. To answer this problem, we have developed a dynamically reconfigurable vision processing system, based on the innovative features of Cleopatre real-time applicative layer concerning scheduling and fault tolerance. This framework allows to define emergency and optional tasks to ensure a minimal quality of service for the other subsystems of the robot, while allowing to adapt dynamically vision processing chain to an exceptional overlasting vision process or processor overload. Thus, it allows a better cohabitation of several subsystems in a single hardware, and to develop less expensive but safe systems, as they will be designed for the regular case and not rare exceptional ones. Finally, it brings a new way to think and develop vision systems, with pairs of complementary operators.展开更多
This paper puts forward a new scheme of Embedded Numerical Control System based on ARM and DSP,which is at the base of research on traditional numerical control system and embedded technology.And the paper also descri...This paper puts forward a new scheme of Embedded Numerical Control System based on ARM and DSP,which is at the base of research on traditional numerical control system and embedded technology.And the paper also describes the develop- ment of hardware and software platform.All the development and realization are based on the idea of module design.The embed- ded numerical control system,using ARM and DSP to construct the main control platform,realizes the real-time operation of sys- tem and improves the stability and reliability with the modular designing ideas of hardware and software and with the support of embedded real-time operating system(uc/os-Ⅱ).And the system could realize the multi-network supporting,which is also accord with the development of modularization,flexibility and latticing of numerical control system.展开更多
For the purpose of the monitor system in digital protection, the embedded real-time operating system (RTOS) and the embedded GUI (Graphical User Interface) is introduced to design the monitor system. Combining the nec...For the purpose of the monitor system in digital protection, the embedded real-time operating system (RTOS) and the embedded GUI (Graphical User Interface) is introduced to design the monitor system. Combining the necessity and the application value of the operation system, the choice of embedded Linux and Qt/Embedded is completely viable for the monitor system in digital protection for generator-transformer sets. The design with embedded Linux and embedded GUI enriches system information, increases developing efficiency and improve the generality.展开更多
The controller plays an important rol e in microwave landing system(MLS) navigation equipment.The embedded advanced reduced-instruction-set-computing(RISC) machine(ARM) is introduced to de velop a new MLS controller b...The controller plays an important rol e in microwave landing system(MLS) navigation equipment.The embedded advanced reduced-instruction-set-computing(RISC) machine(ARM) is introduced to de velop a new MLS controller based on the functional requirements.A design includ ing hardware and software of an ARM system is given.The hardware design involve s a ARM smallest system and its interface.μC/OS-II,a good real-time operating system(RTOS),is i ntroduced in the software design.The task partitioning and management are also i nvolved.The experimental results demonstrate that the embedded ARM technique is an effective way in the complex multi-task system,and it meets the high inte gration and real-time processing requirements of the navigation equipment.展开更多
文摘Today, the number of embedded system was applied in the field of automation and control has far exceeded a variety of general-purpose computer. Embedded system is gradually penetrated into all fields of human society, and ubiquitous embedded applications constitute the 'ubiquitous' computing era. Embedded operating system is the core of the em-bedded system, and it directly affects the performance of the whole system. Our Liaoning Provincial Key Laboratory of Embedded Technology has successfully developed five kinds of device-level embedded operating systems by more than ten years’ efforts, and these systems are Webit 5.0, Worix, μKernel, iDCX 128 and μc/os-II 128. This paper mainly analyses and compares the implementation mechanism and performance of these five kinds of device-level embedded operating systems in detail.
基金This work was supported by the French research office(No.01 K 0742)under the Cléopatre project.
文摘This paper describes specific constraints of vision systems that are dedicated to be embedded in mobile robots. If PC-based hardware architecture is convenient in this field because of its versatility, flexibility, performance, and cost, current real-time operating systems are not completely adapted to long processing with varying duration, and it is often necessary to oversize the system to guarantee fail-safe functioning. Also, interactions with other robotic tasks having more priority are difficult to handle. To answer this problem, we have developed a dynamically reconfigurable vision processing system, based on the innovative features of Cleopatre real-time applicative layer concerning scheduling and fault tolerance. This framework allows to define emergency and optional tasks to ensure a minimal quality of service for the other subsystems of the robot, while allowing to adapt dynamically vision processing chain to an exceptional overlasting vision process or processor overload. Thus, it allows a better cohabitation of several subsystems in a single hardware, and to develop less expensive but safe systems, as they will be designed for the regular case and not rare exceptional ones. Finally, it brings a new way to think and develop vision systems, with pairs of complementary operators.
文摘This paper puts forward a new scheme of Embedded Numerical Control System based on ARM and DSP,which is at the base of research on traditional numerical control system and embedded technology.And the paper also describes the develop- ment of hardware and software platform.All the development and realization are based on the idea of module design.The embed- ded numerical control system,using ARM and DSP to construct the main control platform,realizes the real-time operation of sys- tem and improves the stability and reliability with the modular designing ideas of hardware and software and with the support of embedded real-time operating system(uc/os-Ⅱ).And the system could realize the multi-network supporting,which is also accord with the development of modularization,flexibility and latticing of numerical control system.
文摘For the purpose of the monitor system in digital protection, the embedded real-time operating system (RTOS) and the embedded GUI (Graphical User Interface) is introduced to design the monitor system. Combining the necessity and the application value of the operation system, the choice of embedded Linux and Qt/Embedded is completely viable for the monitor system in digital protection for generator-transformer sets. The design with embedded Linux and embedded GUI enriches system information, increases developing efficiency and improve the generality.
文摘The controller plays an important rol e in microwave landing system(MLS) navigation equipment.The embedded advanced reduced-instruction-set-computing(RISC) machine(ARM) is introduced to de velop a new MLS controller based on the functional requirements.A design includ ing hardware and software of an ARM system is given.The hardware design involve s a ARM smallest system and its interface.μC/OS-II,a good real-time operating system(RTOS),is i ntroduced in the software design.The task partitioning and management are also i nvolved.The experimental results demonstrate that the embedded ARM technique is an effective way in the complex multi-task system,and it meets the high inte gration and real-time processing requirements of the navigation equipment.
