A New Simulation Model for Recoil Analysis of Deep-Water Drilling Risers After Emergency Disconnection

The recoil response of a deep-water drilling riser following an ED(Emergency Disconnection)scenario is a transient and sensitive process.The recoiling displacement of the riser is the resultant of recoil motion and axial stretch.How-ever,it is typically represented by one variable in recoil simulations.As axial deformation is quite small compared with axial motion in the recoil process,it inevitably introduces numerical errors(i.e.,a large number annihilating a small number).Thus,it is hard to perform a quantitative analysis of axial deformation,although a consensus initial deformation is essential for recoil dynamics.Moreover,the triggered axial natural modes have never been examined before.In this study,the recoil response is decomposed into two parts:recoil motion and axial deformation,and a novel model is developed by Galerkin method.It has demonstrated that the initial stretch has a significant effect at the initial stage in recoil.The existing models underestimate the effects of axial deformation.The new model can capture information of triggered natural modes and figure out the modes undergoing dynamic compression.This study can be beneficial to overpull setting,determination of ED time and anti-recoil control optimization.

Integrated risk management: a Petrobras application in offshore well construction safety to minimize critical emergency disconnections

In order to avoid mistakes and to save a great deal of time in analysis, an innovative methodology was developed that can analyze the well operations and rig characteristics involved to define the best emergency disconnect sequence （EDS） available. A solution was developed based on the characteristics of the rigs and blowout preventers （BOPs）, and six variables were considered that directly affect the choice of EDS. All possible combinations of 64 scenarios were analyzed, and the priority of choice of the EDS was defined empirically. This paper presents an approach to EDS risk management and examples of exposure time （time without riser safety margin and shear capability） for the same well, which can be lowered from 13% to 0.1%. The impact of this reduction is related to the ability of the BOP to cut some of the heavy casings, in addition to improved availability of EDS modes. This implementation opened up many possibilities for the performance of risk exposure analysis, enabling comparison of several BOP configurations of contracted rigs and selection of the best options. This innovative approach allowed a better management of the rig schedules, prioritizing safety aspects and making it possible to allocate the fleet in a systematic way.

Coupling Effects of A Deep-Water Drilling Riser and the Platform and the Discharging Fluid Column in An Emergency Disconnect Scenario

As drilling operations move into remote locations and extreme water depths, recoil analysis requires more careful considerations and the incidence of emergency disconnect is increased inevitably. To accurately capture the recoil dynamics of a deep-water riser in an emergency disconnect scenario, researchers typically focus on modelling the influential subsystems (e.g., the tensioner, the mud discharge and seawater refilling process) which can be solved in the preprocessing, and then the determined parameters are transmitted into an existing global riser analysis software. Distinctively, the current study devotes efforts into the coupling effects resulting from that the suspended riser reacts the platform heave motion via the tensioner system in the course of recoil and the discharging fluid column follows the oscillation of the riser in the mud discharge process. Four simulation models are established based on lumped mass method employing different formulas for the top boundary condition of the riser and the discharging flow acceleration. It demonstrates that the coupling effects discussed above can significantly affect the recoil behavior during the transition phase from initial disconnect to the final hang-off state. It is recommended to develop a fully- coupled integrated model for recoil analysis and anti-recoil control system design before extreme deep-water applications.