Time function of surface subsidence based on Harris model in mined-out area

The surface subsidence is a common environmental hazard in mined-out area. Based on careful analysis of the regularity of surface subsidence in mined-out area, we proposed a new time function based on Harris curve model in consideration of the shortage of current surface subsidence time functions. By analyzing the characteristics of the new time function, we found that it could meet the dynamic process, the velocity change process and the acceleration change process during surface subsidence. Then its rationality had been verified through project cases. The results show that the proposed time function model can give a good reflection of the regularity of surface subsidence in mined-out area and can accurately predict surface subsidence. And the prediction data of the model are a little greater than measured data on condition of proper measured data quantity, which is safety in the engineering. This model provides a new method for the analysis of surface subsidence in mined-out area and reference for future prediction, and it is valuable to engineering application.

The Time and Regime Dependencies of Sensitive Areas for Tropical Cyclone Prediction Using the CNOP Method

This study examines the time and regime dependencies of sensitive areas identified by the conditional nonlinear optiflml perturbation （CNOP） method for forecasts of two typhoons. Typhoon Meari （2004） was weakly nonlinear and is herein referred to as the linear case, while Typhoon Matsa （2005） was strongly nonlinear and is herein referred to as the nonlinear case. In the linear case, the sensitive areas identified for special forecast times when the initial time was fixed resembled those identified for other forecast times. Targeted observations deployed to improve a special time forecast would thus also benefit forecasts at other times. In the nonlinear case, the similarities among the sensitive areas identified for different forecast times were more limited. The deployment of targeted observations in the nonlinear case would therefore need to be adapted to achieve large improvements for different targeted forecasts. For both cases, the closer the forecast time, the higher the similarities of the sensitive areas. When the forecast time was fixed, the sensitive areas in the linear case diverged continuously from the verification area as the forecast period lengthened, while those in the nonlinear case were always located around the initial cyclones. The deployment of targeted observations to improve a special forecast depends strongly on the time of deployment. An examination of the efficiency gained by reducing initial errors within the identified sensitive areas confirmed these results. In general, the greatest improvement in a special time forecast was obtained by identifying the sensitive areas for the corresponding forecast time period.

Numerical simulation for influence of excavation and blasting vibration on stability of mined-out area

Dynamic analysis steps and general flow of fast lagrangian analysis of continua in 3 dimensions(FLAC3D) were discussed. Numerical simulation for influence of excavation and blasting vibration on stability of mined-out area was carried out with FLAC3D. The whole analytical process was divided into two steps, including the static analysis and the dynamic analysis which were used to simulate the influence of excavation process and blasting vibration respectively. The results show that the shape of right upper boundary is extremely irregular after excavation, and stress concentration occurs at many places and higher tensile stress appears. The maximum tensile stress is higher than the tensile strength of rock mass, and surrounding rock of right roof will be damaged with tension fracture. The maximum displacement of surrounding rock is 4.75 mm after excavation. However, the maximum displacement increases to 5.47 mm after the blasting dynamic load is applied. And the covering area of plastic zones expands obviously, especially at the foot of right upper slope. The analytical results are in basic accordance with the observed results on the whole. Damage and disturbance on surrounding rock to some degree are caused by excavation, while blasting dynamic load increases the possibility of occurrence of dynamic instability and destruction further. So the effective supporting and vibration reducing measures should be taken during mining.

Numerical analysis of stability for mined-out area in multi-field coupling

There were differences between real boundary and blast hole controlling boundary of irregular mined-out area in underground metal mines. There were errors in numerical analysis of stability for goaf, if it was analyzed as regular 3D mined-out area and the influence of coupling stress-seepage-disturbance was not considered adequately. Taking a lead zinc mine as the background, the model was built by the coupling of Surpac and Midas-Gts based on the goaf model precisely measured by CMS.According to seepage stress fundamental equations based on the equivalent continuum mechanical and the theory about equivalent load of dynamic disturbance in deep-hole blasting, the stability of mined-out area under multi-field coupling of stress-seepage-dynamic disturbance was numerically analyzed. The results show that it is more consistent between the numerical analysis model based on the real model of irregular 3D shape goaf and the real situation, which could faithfully reappear the change rule of stress–strain about the surrounding rock under synthetic action of blasting dynamic loading and the seepage pressure. The mined-out area multi-field coupling formed by blasting excavation is stable. Based on combination of the advantages of the CMS,Surpac and Midas-Gts, and fully consideration of the effects of multi-field coupling, the accurate and effective way could be provided for numerical analysis of stability for mined-out area.

Instability identification on large scale underground mined-out area in the metal mine based on the improved FRBFNN

To identify the instability on large scale underground mined-out area in the metal mine effectively,the parameters of radial basis function were determined through clustering method and the improved fuzzy radial basis function neural network(FRBFNN)model of instability identification model about large scale underground mined-out area in the metal mine was built.The improved FRBFNN model was trained and tested.The results show that the improved FRBFNN model has high training accuracy and generalization ability.Parameters such as pillar area ratio,filling level and the value of rock quality designation have strong influence on instability of large scale underground mined-out area.Correctness of analysis about the improved FRBFNN model was proved by the practical application results about instability discrimination of surrounding rock in large-scale underground mined-out area of a metal mine in south China.

Quantitative analysis of biotechnical reinforcement for a steep slope consisting of composite coal-gangue-soil medium adjacent to a mined-out area

The engineering and geological characteristics of a steep slope consisting of coal gangue, rock and soil medium in Huating coal mine have been comprehensively investigated. Owing to humid weather, heavy rainfall, vegetation and porous characteristics of the soil and rock mass, the steep slope will be destabilized and induce mud-rock flow or derive hazard easily. Firstly, based on the classical slope reinforcement theory, some regularity between the shear and displacement in the destabilized zone of the slope with or without root strength contribution is presented. Then, based on the experimental and statistical analysis of root strength, hydrological characteristics and stability status, etc., some possible biotechnical techniques for reinforcement of the steep slope have been suggested. These methods are important for quantitative analysis of destabilization of the slope and design of the biotechnical reinforcement.

LÉVY AREA ANALYSIS AND PARAMETER ESTIMATION FOR FOU PROCESSES VIA NON-GEOMETRIC ROUGH PATH THEORY

This paper addresses the estimation problem of an unknown drift parameter matrix for a fractional Ornstein-Uhlenbeck process in a multi-dimensional setting.To tackle this problem,we propose a novel approach based on rough path theory that allows us to construct pathwise rough path estimators from both continuous and discrete observations of a single path.Our approach is particularly suitable for high-frequency data.To formulate the parameter estimators,we introduce a theory of pathwise Itôintegrals with respect to fractional Brownian motion.By establishing the regularity of fractional Ornstein-Uhlenbeck processes and analyzing the long-term behavior of the associated Lévy area processes,we demonstrate that our estimators are strongly consistent and pathwise stable.Our findings offer a new perspective on estimating the drift parameter matrix for fractional Ornstein-Uhlenbeck processes in multi-dimensional settings,and may have practical implications for fields including finance,economics,and engineering.

Robust H_∞ Load Frequency Control of Multi-area Power System With Time Delay:A Sliding Mode Control Approach

This paper is devoted to investigate the robust H∞sliding mode load frequency control(SMLFC) of multi-area power system with time delay. By taking into account stochastic disturbances induced by the integration of renewable energies,a new sliding surface function is constructed to guarantee the fast response and robust performance, then the sliding mode control law is designed to guarantee the reach ability of the sliding surface in a finite-time interval. The sufficient robust frequency stabilization result for multi-area power system with time delay is presented in terms of linear matrix inequalities(LMIs). Finally,a two-area power system is provided to illustrate the usefulness and effectiveness of the obtained results.

A Delay-Dependent Anti-Windup Compensator for Wide-Area Power Systems With Time-Varying Delays and Actuator Saturation

In this paper, a delay-dependent anti-windup compensator is designed for wide-area power systems to enhance the damping of inter-area low-frequency oscillations in the presence of time-varying delays and actuator saturation using an indirect approach. In this approach, first, a conventional wide-area damping controller is designed by using output feedback with regional pole placement approach without considering time-varying delays and actuator saturation. Then to mitigate the effect of both time-varying delays and actuator saturation, an add-on delay-dependent anti-windup compensator is designed. Based on generalized sector conditions, less conservative delay-dependent sufficient conditions are derived in the form of a linear matrix inequality(LMI) to guarantee the asymptotic stability of the closedloop system in the presence of time-varying delays and actuator saturation by using Lyapunov-Krasovskii functional and Jensen integral inequality. Based on sufficient conditions, the LMI-based optimization problem is formulated and solved to obtain the compensator gain which maximizes the estimation of the region of attraction and minimizes the upper bound of-gain. Nonlinear simulations are performed first using MATLAB/Simulink on a two-area four-machine power system to evaluate the performance of the proposed controller for two operating conditions, e.g.,3-phase to ground fault and generator 1 terminal voltage variation. Then the proposed controller is implemented in real-time on an OPAL-RT digital simulator. From the results obtained it is verified that the proposed controller provides sufficient damping to the inter-area oscillations in the presence of time-varying delays and actuator saturation and maximizes the estimation of the region of attraction.

Abandoned land identification in karst mountain area based on time series SAR characteristics at geo-parcels scale

Mapping abandoned land is very important for accurate agricultural management.However,in karst mountainous areas,continuous high-resolution optical images are difficult to obtain in rainy weather,and the land is fragmented,which poses a great challenge for remote sensing monitoring of agriculture activities.In this study,a new method for identifying abandoned land is proposed:firstly,a few Google Earth images are used to transform arable land into accurate vectorized geo-parcels;secondly,a time-series data set was constructed using Sentinel-1A Alpha parameters for 2020 on each farmland geoparcel;thirdly,the semi-variation function(SVF)was used to analyze the spatial-temporal characteristics,then identify abandoned land.The results show:(1)On the basis of accurate spatial information and boundary of farmland land,the SAR time-series dataset reflects the structure and time-series response.abandoned land with an accuracy of 80.25%.The problem of remote sensing monitoring in rainy regions and complex surface areas is well-resolved.(2)The spatial heterogeneity of abandoned land is more obvious than that of cultivated land within geoparcels.The step size for significant changes in the SVF of abandoned land is shorter than that of cultivated land.(3)The SVF time sequence curve presented a strong peak feature when farmland was abandoned.This reveals that the internal spatial structure of abandoned land is more disordered and complex.It showed that time-series variations of spatial structure within cultivated land have broader applications in remote sensing monitoring of agriculture in complex imaging environments.

Time usage analysis and satisfaction comparison by occupational area according to the sex of single-parent families

BACKGROUND Single-parent families are burdened with dual roles as parents amidst economic poverty due to the lack of a spouse.Single parents also face the complications of time poverty.AIM To examine the time use of single-parent families by dividing their time into occupational area and explore the differences in time deficiency and life satisfaction.METHODS In this study,the time usage in the‘2019 time of life survey’data of the National Statistical Office is classified based on the fourth edition of the Occupational Therapy Practice Framework,and the time use and satisfaction of single-parent families classified according to sex.In the‘2019 time of life survey’of the National Statistical Office,the subjects who selected single-parent families in the‘single parent-parent-grandchild households’item were first selected.The data of 404 parents from single-parent families were selected next.The time usage,time deficiency,and life satisfaction were analyzed by occupational area.RESULTS The subjects spent the most time resting and sleeping,followed by engaging in instrumental activities of daily living(IADLs),work,and health management.As a result of comparing the subjects by sex,it was found that the male subjects spent more time on work than the female subjects,and the female subjects spent more time on IADLs,education and social participation.As a result of comparing time deficiency and life satisfaction,the male subjects felt that they lacked time compared to the female subjects.There was no significant difference in life satisfaction.By examining whether single-parent families'time use by occupa tional area affected the time deficiency,it was found that male's working time make them feel they have less time,while female's leisure time makes them feel they have more time.CONCLUSION This study made it possible to determine the characteristics of single-parent households’time use and sex differences.Furthermore,it is expected to be used as basic data for measures to solve not only time poverty,but also economic poverty in single-parent families.

Zircon and Apatite U-Pb Geochronology and Geochemistry of the Mafic Dykes in the Shuangxiwu Area, Northwestern Zhejiang Province: Constraints on the Initial Time of Neoproterozoic Rifting in South China

Previous studies have shown that there are some ca.770–750 Ma mafic dykes at the western segment of the Neoproterozoic Jiangnan orogen(JO),and they represent post-orogenic magmatism due to orogenic collapse(Wang

Quanta of the Phase-Space Areas Given by Intervals of Energy and Time Associated with Electron Transitions

The paper examines the energy of electron transitions in an emission process and the time intervals necessary for that process. For simple quantum systems, the both parameters—that of energy and time—depend on the difference Δn of the quantum numbers n labelling the beginning and end state of emission. It is shown that the phase-space areas formed by products of energy and time involved in the emission can be represented as a quadratic function of Δn multiplied by the Planck constant h.

Velocity model and time-depth conversion for the northwestern South China Sea deepwater areas

There are rich natural gas resources in the northwestern South China Sea deepwater areas, with poor degree of exploration. Because of the unique tectonic, sedimentary background of the region, velocity model building and time-depth conversion have been an important and difficult problem for a long time. Recent researches in this direction have revealed three major problems for deepwater areas, i.e., the way to determine error correction for drilling velocity, the optimization of velocity modeling, and the understanding and analysis of velocity variations in the slope areas. The present contribution proposes technical solutions to the problems：（1） velocity correction version can be established by analyzing the geology, reservoir, water depths and velocity spectrum characteristics;（2） a unified method can be adopted to analyze the velocity variation patterns in drilled pale structural positions;and （3） across-layer velocity is analyzed to establish the velocity model individually for each of the layers. Such a solution is applicable, as shown in an example from the northwestern South China Sea deepwater areas, in which an improved prediction precision is obtained.

Factors Influencing Migrant Workers' Urban Labor Patterns: Willing Working Time in Urban Areas as the Mediator

China is witnessing a very complicated economic development environment.Migrant workers'working patterns will directly affect their income level and the realization of many economic and social development goals.This paper collects relevant data from three places:Shanghai,Lanzhou and Chengdu for empirical research whose results show that determinants of migrant worker's willing working time in urban areas mainly include the“income-consumption difference”,“urban-rural consumption difference”and their“urban income and expenditure uncertainty”.These factors directly affect their effective working time in the city,and determine their choice of choosing corresponding work patterns.From the significant differences of these factors,we can see that migrant workers in China is still struggling to solve their material needs under the pressure of livelihood,and less attention is paid to their spiritual needs and the pursuit of quality of life.

Pool Sizes and Turnover of Soil Organic Carbon of Farmland Soil in Karst Area of Guilin

The three-pool and first-order model separates the mineralizable organic carbon into active,slow,and passive carbon pools.This paper used the model and decomposition curves of the soil organic carbon to fit the active pool and its decomposition rate,slow pool and its decomposition rate.The results showed that the size of the active pool from different profiles accounted for 2.09%-3.08% of the total soil organic carbon and the mean residue time was 3.57-17.21 days.And the size of the slow pool accounted for 3.19%-43.55% and the mean residue time was 1.12-4.94 years.Acid hydrolysis（6M HCl） was used to fractionate the passive organic carbon,which accounted for 50.83%-94.44% of the total soil organic carbon.

A new wide area damping controller design method considering signal transmission delay to damp interarea oscillations in power system

Wide area damping controller(WADC) is usually utilized to damp interarea low frequency oscillation in power system. However, conventional WADC design method neglects the influence of signal transmission delay and damping performance of WADC designed by the conventional method may deteriorate or even has no effect when signal transmission delay is beyond delay margin, an index that denotes delay endurance degree of power system. Therefore, a new design method for WADC under the condition of expected damping factor and required signal transmission delay is presented in this work. An improved delay margin with less conservatism is derived by adopting a new Lyapunov-Krasovskii function and more compact bounding technique on the derivative of Lyapunov-Krasovskii functional. The improved delay margin, which constructs the correlation of damping factor and signal transmission delay, can be used to design WADC. WADC designed by the proposed method can ensure that power system satisfies expected damping factor when WADC input signal is delayed within delay margin. Satisfactory test results demonstrate the effectiveness of the proposed method.

Individual Leaf Area of Early Flowering Arabidopsis Genotypes Is More Affected by Drought than Late Flowering Ones: A Multi-Scale Analysis in 35 Genetically Modified Lines

Plants acclimate to drought optimizing the trade-off between biomass production and water loss while ensuring their survival and reproduction. Plants also modify their growth or phenology as complementary strategies in response to stress. Despite evidence of an interaction between flowering time and plant growth response to environmental stresses, this interaction in response to drought is under debate. To contribute to the analysis of this interaction, leaf growth of 35 genetically modified lines of Arabidopsis thaliana and their common wild-type, Col-0 was analyzed by a quantitative multi-scale phenotyping approach from cellular to whole plant scale both in well-watered and soil moderate water deficit conditions. These genotypes were selected for the various physiological functions potentially altered by their genetic modification and that could interact with plant growth and/or their drought responses. In all genotypes, leaf expansion decreased in response to drought both at the whole rosette and the individual leaf levels. Additionally, epidermal cell area and/or epidermal cell number decreased in response to the drought treatment. In contrast, the number of rosette leaves was reduced in only half of the genotypes and leaf growth duration was only modified in 4 of them. Despite long photoperiod conditions, the duration of the vegetative phase, i.e. the time elapsed between germination and flowering stage, varied from 12 to 27 days among genotypes under well watered conditions. Our analyses revealed that the differences of flowering time observed in well-watered condition impacted the leaf area response to drought. Early-flowering genotypes slightly decreased their final leaf number, but strongly reduced their individual leaf area compared with the late-flowering ones. This result underlines the difficulty to analyze plant response to environmental stresses when genotypes with different flowering dates are compared.

Seismological study on the crustal structure of Tengchong volcanic-geothermal area

Based upon the deep seismic sounding profile conducted in the Tengchong volcanic-geothermal area, a two-dimensional crustal P velocity structure is obtained by use of the finite-difference inversion and the forward travel-time fitting method. The crustal model shows that there is a low velocity zone in upper crust in the Tengchong area, which may be related to the volcanic-geothermal activities, and two intracrustal faults (the LonglingRuili fault and Tengchong fault) exist on the profile, where the Tengchong fault may extend to the Moho discontinuity. Meanwhile, based on teleseismic data recorded by a temporary seismic network, we obtained the S-wave velocity structures beneath the RehaiRetian region in the Tengchong area, which show the low S-wave velocity anomaly in upper crust. The authors discuss the causes of Tengchong volcanic eruption based on the deep crustal structure. The crustal structure in the Tengchong volcanic-geothermal area is characterized by low P-wave and S-wave velocity, low resistivity, high heat-flow value and low Q value. The P-wave velocity in the upper mantle is also low. For this information, it can be induced that the magma in the crust is derived from the upper mantle, and the low velocity anomaly in upper crust in the Tengchong area may be related to the differentiation of magma. The Tengchong volcanoes are close to an active plate boundary and belong to plate boundary volcanoes.