To reduce the viscosity of highly-viscous oil of the Tahe oilfield （Xinjiang,China）,an oilsoluble polybasic copolymer viscosity reducer for heavy oil was synthesized using the orthogonal method.The optimum reaction ...To reduce the viscosity of highly-viscous oil of the Tahe oilfield （Xinjiang,China）,an oilsoluble polybasic copolymer viscosity reducer for heavy oil was synthesized using the orthogonal method.The optimum reaction conditions are obtained as follows：under the protection of nitrogen,a reaction time of 9 h,monomer mole ratio of reaction materials of 3：2：2 （The monomers are 2-propenoic acid,docosyl ester,maleic anhydride and styrene,respectively）,initiator amount of 0.8% （mass percent of the sum of all the monomers） and reaction temperature of 80 oC.This synthesized viscosity reducer is more effective than commercial viscosity reducers.The rate of viscosity reduction reached 95.5% at 50 oC.Infrared spectra （IR） and interfacial tensions of heavy oil with and without viscosity reducer were investigated to understand the viscosity reduction mechanism.When viscosity reducer is added,the molecules of the viscosity reducer are inserted amongst the molecules of crude oil,altering the original intermolecular structure of crude oil and weakening its ability to form hydrogen bonds with hydroxyl or carboxyl groups,so the viscosity of crude oil is reduced.Field tests of the newly developed oil-soluble viscosity reducer was carried out in the Tahe Oilfield,and the results showed that 44.5% less light oil was needed to dilute the heavy oil to achieve the needed viscosity.展开更多
In the process of water-flooding development of heavy oil reservoir,due to the high viscosity and oil-water mobility ratio of heavy oil,there are some problems such as poor fluidity,high residual oil saturation and lo...In the process of water-flooding development of heavy oil reservoir,due to the high viscosity and oil-water mobility ratio of heavy oil,there are some problems such as poor fluidity,high residual oil saturation and low recovery efficiency,which seriously restrict the efficient development of heavy oil.The molecular structure characteristics of asphaltenes and resins in heavy oil were analyzed.Based on the three most concerned properties of chemical agents,including the emulsification performance,the interface performance and the oil washing performance,three chemical oil displacement agents for heavy oil reservoirs were developed,and the structure of the chemical agents were characterized by high resolution mass spectrometry.The performance evaluation of chemical agents and core displacement experiments show that there is no obvious correlation between the properties of chemical agents,including interfacial tension,emulsifying ability and oil washing ability.For heavy oil reservoirs,the emulsification and viscosity reduction performance of chemical agents was more important than the oil washing capacity,and the oil washing capacity was more important than the interface performance.Viscosity reduction performance was the key parameter of oil displacement agent suitable for heavy oil reservoir.The composite binary system consisting of the viscosity reducer and the polymer had better oil recovery than using viscosity reducer alone.展开更多
CRMA was prepared by mixing PG 64-22 asphalt with crumb rubber powder of 40 mesh size and 18% by weight of the asphalt. Sasobit, a typical organic wax additive, was selected and added into CRMA. A series of tests, nam...CRMA was prepared by mixing PG 64-22 asphalt with crumb rubber powder of 40 mesh size and 18% by weight of the asphalt. Sasobit, a typical organic wax additive, was selected and added into CRMA. A series of tests, namely, brookfield viscosity, environmental scanning electron microscope（ESEM）, component test, differential scanning calorimeter（DSC）, fourier transform infrared spectroscopy （FTIR） and nuclear magnetic resonance （NMR） were conducted on CRMA with and without organic wax additive, and microcosmic appearance, component content and molecular structure of various asphalt binders were obtained. The test results indicate that the addition of Sasobit~ into CRMA can effectively change the contents of components： the content of asphaltenes increases relatively, while saturates decreases. In addition, the interaction between various components of CRMA is weakened, and the state of equilibrium between the dispersant and dispersed phase is changed at the same time. That is why the viscosity decreases after the organic wax additive is added into CRMA.展开更多
Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relation...Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relations between rheology and structural properties of typical emulsifiers were analyzed. Experimental results show that viscosity of emulsifiers didn＇ t change with shear rate at room temperature and appeared properties of Newtonian fluid. Viscosity of different component emulsifiers declines with temperature in different modes. The change of strain doesn＇ t affect modu- lus of emulsifiers. Loss modulus increases linearly with the increase of frequency in oscillation and storage modulus does non-linearly. The higher the temperature is, the lower change amplitude of loss modulus with frequency will be. The emulsifiers with imide and amide functionality for emulsion explosives have better shear properties at high temperature and better shapingness and stability at room temperature than other emulsifiers with ester and Sorbin Monoleate （SMO） functionality.展开更多
Magnetic reduced graphene oxide(MRGO) nanocomposite was prepared by the chemical coprecipitation method and applied as adsorbent for removing emulsified oil from oily wastewater. SEM, TEM, XRD, FT-IR, VSM and other an...Magnetic reduced graphene oxide(MRGO) nanocomposite was prepared by the chemical coprecipitation method and applied as adsorbent for removing emulsified oil from oily wastewater. SEM, TEM, XRD, FT-IR, VSM and other analytical methods were utilized to characterize the prepared MRGO. The adsorption performance of MRGO was evaluated under different initial adsorbate concentration, MRGO dosage, temperature, and pH value of the solution. The adsorption kinetics and isotherms were investigated. In addition, the MRGO repeatability was also tested. It was found that almost 65%of emulsified oil were removed by MRGO in the first 15 min. The MRGO adsorption capacity and efficiency for removal of adsorbate reached 335.85 mg/g and 92.52% within 60 min, respectively. The adsorption capacity reduced with an increasing MRGO dosage, while increased with the increase of emulsified oil concentration. The adsorption performance of MRGO in the alkaline environment was lower than that in the acidic environment. The adsorption data could well fit to the pseudosecondorder model. The Langmuir model could well describe the isotherm data. The MRGO adsorption capacity was still more than 236.1 mg/g at the sixth regeneration cycle.展开更多
文摘To reduce the viscosity of highly-viscous oil of the Tahe oilfield （Xinjiang,China）,an oilsoluble polybasic copolymer viscosity reducer for heavy oil was synthesized using the orthogonal method.The optimum reaction conditions are obtained as follows：under the protection of nitrogen,a reaction time of 9 h,monomer mole ratio of reaction materials of 3：2：2 （The monomers are 2-propenoic acid,docosyl ester,maleic anhydride and styrene,respectively）,initiator amount of 0.8% （mass percent of the sum of all the monomers） and reaction temperature of 80 oC.This synthesized viscosity reducer is more effective than commercial viscosity reducers.The rate of viscosity reduction reached 95.5% at 50 oC.Infrared spectra （IR） and interfacial tensions of heavy oil with and without viscosity reducer were investigated to understand the viscosity reduction mechanism.When viscosity reducer is added,the molecules of the viscosity reducer are inserted amongst the molecules of crude oil,altering the original intermolecular structure of crude oil and weakening its ability to form hydrogen bonds with hydroxyl or carboxyl groups,so the viscosity of crude oil is reduced.Field tests of the newly developed oil-soluble viscosity reducer was carried out in the Tahe Oilfield,and the results showed that 44.5% less light oil was needed to dilute the heavy oil to achieve the needed viscosity.
基金supported by the 13th Five-Year Plan National Key Project of China (NO.2016ZX0511-003-004 and No.2017ZX05049-003-008)
文摘In the process of water-flooding development of heavy oil reservoir,due to the high viscosity and oil-water mobility ratio of heavy oil,there are some problems such as poor fluidity,high residual oil saturation and low recovery efficiency,which seriously restrict the efficient development of heavy oil.The molecular structure characteristics of asphaltenes and resins in heavy oil were analyzed.Based on the three most concerned properties of chemical agents,including the emulsification performance,the interface performance and the oil washing performance,three chemical oil displacement agents for heavy oil reservoirs were developed,and the structure of the chemical agents were characterized by high resolution mass spectrometry.The performance evaluation of chemical agents and core displacement experiments show that there is no obvious correlation between the properties of chemical agents,including interfacial tension,emulsifying ability and oil washing ability.For heavy oil reservoirs,the emulsification and viscosity reduction performance of chemical agents was more important than the oil washing capacity,and the oil washing capacity was more important than the interface performance.Viscosity reduction performance was the key parameter of oil displacement agent suitable for heavy oil reservoir.The composite binary system consisting of the viscosity reducer and the polymer had better oil recovery than using viscosity reducer alone.
基金Fund by the National Natural Science Found Project of China(NSFC)(No.51278173)the Science and Technology Project of Jiangsu Provincial Communications Department(No.SBK201120606)
文摘CRMA was prepared by mixing PG 64-22 asphalt with crumb rubber powder of 40 mesh size and 18% by weight of the asphalt. Sasobit, a typical organic wax additive, was selected and added into CRMA. A series of tests, namely, brookfield viscosity, environmental scanning electron microscope（ESEM）, component test, differential scanning calorimeter（DSC）, fourier transform infrared spectroscopy （FTIR） and nuclear magnetic resonance （NMR） were conducted on CRMA with and without organic wax additive, and microcosmic appearance, component content and molecular structure of various asphalt binders were obtained. The test results indicate that the addition of Sasobit~ into CRMA can effectively change the contents of components： the content of asphaltenes increases relatively, while saturates decreases. In addition, the interaction between various components of CRMA is weakened, and the state of equilibrium between the dispersant and dispersed phase is changed at the same time. That is why the viscosity decreases after the organic wax additive is added into CRMA.
基金Supported by Independent Research Projects of State Key Laboratory of Explosion Science and Technology(ZDKT08-05)
文摘Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relations between rheology and structural properties of typical emulsifiers were analyzed. Experimental results show that viscosity of emulsifiers didn＇ t change with shear rate at room temperature and appeared properties of Newtonian fluid. Viscosity of different component emulsifiers declines with temperature in different modes. The change of strain doesn＇ t affect modu- lus of emulsifiers. Loss modulus increases linearly with the increase of frequency in oscillation and storage modulus does non-linearly. The higher the temperature is, the lower change amplitude of loss modulus with frequency will be. The emulsifiers with imide and amide functionality for emulsion explosives have better shear properties at high temperature and better shapingness and stability at room temperature than other emulsifiers with ester and Sorbin Monoleate （SMO） functionality.
基金funded by the Major National Science and Technology Projects of China(Grant No.2016ZX05040-003)the Top Talents Project of China University of Petroleum(grant No.2015011)
文摘Magnetic reduced graphene oxide(MRGO) nanocomposite was prepared by the chemical coprecipitation method and applied as adsorbent for removing emulsified oil from oily wastewater. SEM, TEM, XRD, FT-IR, VSM and other analytical methods were utilized to characterize the prepared MRGO. The adsorption performance of MRGO was evaluated under different initial adsorbate concentration, MRGO dosage, temperature, and pH value of the solution. The adsorption kinetics and isotherms were investigated. In addition, the MRGO repeatability was also tested. It was found that almost 65%of emulsified oil were removed by MRGO in the first 15 min. The MRGO adsorption capacity and efficiency for removal of adsorbate reached 335.85 mg/g and 92.52% within 60 min, respectively. The adsorption capacity reduced with an increasing MRGO dosage, while increased with the increase of emulsified oil concentration. The adsorption performance of MRGO in the alkaline environment was lower than that in the acidic environment. The adsorption data could well fit to the pseudosecondorder model. The Langmuir model could well describe the isotherm data. The MRGO adsorption capacity was still more than 236.1 mg/g at the sixth regeneration cycle.
