Many delayed-choice experiments based on Mach-Zehnder interferometers (MZI) have been considered and made to address the fundamental problem of wave-particle duality. Conventional wisdom long holds that by inserting...Many delayed-choice experiments based on Mach-Zehnder interferometers (MZI) have been considered and made to address the fundamental problem of wave-particle duality. Conventional wisdom long holds that by inserting or removing the second beam splitter (BS2) in a controllable way, microscopic particles (photons, electrons, etc.) transporting within the MZI can lie in the quantum superposition of the wave and particle state as ψ= aw ψ wave + ap ψ particle. Here we present an alternative interpretation to these delayed-choice experiments. We notice that as the BS2 is purely classical, the inserting and removing operation of the BS2 imposes a time- modulated Hamiltonian H mod (t) = a(t)Hin + b(t)Hout, instead of a quantum superposition of H in and Hour as H = awHin + apHout, to act upon the incident wave function. Solution of this quantum scattering problem, rather than the long held quantum eigen-problem yields a synchronically time-modulated output wave function as ψ mod (t) = a(t) ψ wave +b(t) ψ particle, instead of the stationary quantum superposition state ψ = aw ψ wave + ap ψ particle. As a result, the probability of particle output from the MZI behaves as if they are in the superposition of the wave and particle state when many events over time accumulation are counted and averaged. We expect that these elementary but insightful analyses will shed a new light on exploring basic physics beyond the long-held wisdom of wave-particle duality and the principle of complementarity.展开更多
An in-fiber Mach-Zehnder interferometer for strain measurement is proposed and experimentally demonstrated. The sensor consists of a taper followed by a short section of a multi-mode fiber (MMF) and a dispersion com...An in-fiber Mach-Zehnder interferometer for strain measurement is proposed and experimentally demonstrated. The sensor consists of a taper followed by a short section of a multi-mode fiber (MMF) and a dispersion com- pensating fiber (DCF), which is sandwiched between two single mode fibers (SMFs). The taper is used as a fiber coupler to excite cladding modes in the SMF, and these cladding modes transmit within the MMF and the DCF. The core mode and the cladding modes interfere in the DCF SMF fusion point to form intermodal interference. A well-defined interference spectrum is obtained in the experiment. Selected interference dips are used to measure the strain changes. The experimental results show that this device is sensitive to strain with the wavelength-referenced sensitivity of 2.6 pm/με and the power-referenced sensitivity of 0. 0027 dB/με, respectively.展开更多
To suppress the dispersion effect, an improved scheme was proposed for Mach-Zehnder intefferometer (MZI) based interleaver. The device consists of an MZI, a fiber loop (FL), and a phase shifter inserted in FL. The...To suppress the dispersion effect, an improved scheme was proposed for Mach-Zehnder intefferometer (MZI) based interleaver. The device consists of an MZI, a fiber loop (FL), and a phase shifter inserted in FL. The introduction of π phase shifter into FI, dramatically suppresses the dispersion effiect. Then the transmission response remains square-like shape, with low frequency deviation and high extinction ratio. Moreover, the lower frequency deviation is achieved by reducing the dispersion coefficient. For 100GHz-spacing interleaver, the 0.08nm deviation is reduced to 0.02nm by replacing G.652 with G.655.展开更多
To improve the output characteristics of all-fiber Mach-Zehnder interferometer(MZI)-interleaver,a dual microring-assisted MZI interleaver is designed.According to its structure,the output expression of the device is d...To improve the output characteristics of all-fiber Mach-Zehnder interferometer(MZI)-interleaver,a dual microring-assisted MZI interleaver is designed.According to its structure,the output expression of the device is derived from the signal flow diagram.After simulation analysis,the optimal structural parameters during the transmission process are obtained.In addition,the coupling coefficient and transmission loss of the coupler are analyzed.The results show that the improved interleaver output line wave is closer to the square wave,and its 25 dB cutoff band bandwidth and 0.5 dB passband bandwidth are significantly improved,with the values of 41.2 GHz and 18.9 GHz,respectively.The device has a certain resistantability to deviation,and the transmission loss has less influence on the extinction characteristics of the filter.展开更多
An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferom...An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferometer with a LiNbO3 photoelastic waveguide has been designed, which is capable of detecting seismic acceleration in high-accuracy seismic exploration. The Mach-Zehnder interferometer was successfully fabricated and a lighting test used to check its quality. The frequency response characteristic of the accelerometer was measured2 The accelerometer with a resonant frequency of 3549 Hz was demonstrated to show good linear frequency responding characteristics in the range of 100-3000 Hz. The accelerometer also shows good stability and consistency. Experimental results indicate that the outputs of the on- and cross-axis are 147 and 21.3 mV, respectively.展开更多
A new in-line Mach-Zehnder interferometer (MZI) sensor consisting of a stub of multi-mode fiber and an up-taper was proposed and demonstrated. Temperature measurement can be carried out by detecting wavelength shift...A new in-line Mach-Zehnder interferometer (MZI) sensor consisting of a stub of multi-mode fiber and an up-taper was proposed and demonstrated. Temperature measurement can be carried out by detecting wavelength shift. Dependency of sensitivity on interferometer length and dip wavelength was discussed. Experimental results showed a maximum temperature sensitivity of 113.6pm/℃ can be achieved, which is superior to most fiber temperature sensors based on in-line MZIs within the range from 20℃ to 80℃, also a good mechanical strength can be obtained. The proposed sensor is a good candidate for temperature measurement, due to the advantages of simple structure, easy fabrication, cost- effective and high sensitivity.展开更多
Nonlinear materials have been well established as photo refractive switching material. Important applica- tions of isotropic nonlinear materials are seen in self-focusing, defocusing phenomena, switching systems, etc....Nonlinear materials have been well established as photo refractive switching material. Important applica- tions of isotropic nonlinear materials are seen in self-focusing, defocusing phenomena, switching systems, etc. The nonlinear correction term is basically responsible for the optical switches. Mach-Zehnder inter- ferometer (MZI) is a well-known arrangement for determining the above correction term, but there are some major problems for finding out the term by MZI. We propose a new method of finding the nonlinear correction term as well as the second order nonlinear susceptibility of the materials by using a modified MZI system. This method may be used to find out the above parameters for any unknown nonlinear material.展开更多
Graphene has shown promising perspectives in optical active components due to the large active-control of its permittivity-variation. This paper systematically reviews the recent developments ofgraphene-based optical ...Graphene has shown promising perspectives in optical active components due to the large active-control of its permittivity-variation. This paper systematically reviews the recent developments ofgraphene-based optical modulators, including material property, different integration schemes, single-layer graphene-based modulator, multi-layer and few-layer graphene-based modulators, corresponding figure-of-merits, wavelength/temperature tolerance, and graphene-based fiber-optic modulator. The different treatments for graphene's isotropic and aniso- tropic property were also discussed. The results showed graphene is an excellent material for enhancing silicon's weak modulation capability after it is integrated into the silicon platform, and has great potentials for complemen- tary metal oxide semiconductor (CMOS) compatible optical devices, showing significant influence on optical interconnects in future integrated optoelectronic circuits.展开更多
基金Supported by the National Basic Research Program of China under Grant No 2013CB632704the National Natural Science Foundation of China under Grant No 11434017
文摘Many delayed-choice experiments based on Mach-Zehnder interferometers (MZI) have been considered and made to address the fundamental problem of wave-particle duality. Conventional wisdom long holds that by inserting or removing the second beam splitter (BS2) in a controllable way, microscopic particles (photons, electrons, etc.) transporting within the MZI can lie in the quantum superposition of the wave and particle state as ψ= aw ψ wave + ap ψ particle. Here we present an alternative interpretation to these delayed-choice experiments. We notice that as the BS2 is purely classical, the inserting and removing operation of the BS2 imposes a time- modulated Hamiltonian H mod (t) = a(t)Hin + b(t)Hout, instead of a quantum superposition of H in and Hour as H = awHin + apHout, to act upon the incident wave function. Solution of this quantum scattering problem, rather than the long held quantum eigen-problem yields a synchronically time-modulated output wave function as ψ mod (t) = a(t) ψ wave +b(t) ψ particle, instead of the stationary quantum superposition state ψ = aw ψ wave + ap ψ particle. As a result, the probability of particle output from the MZI behaves as if they are in the superposition of the wave and particle state when many events over time accumulation are counted and averaged. We expect that these elementary but insightful analyses will shed a new light on exploring basic physics beyond the long-held wisdom of wave-particle duality and the principle of complementarity.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61077006,60727004,and 61077060the China National Petroleum Corporation Science and Technology Development Projects under Grant No 2014B-4012the Science Research Plan Projects of Shaanxi Education Department under Grant No 14JK1580
文摘An in-fiber Mach-Zehnder interferometer for strain measurement is proposed and experimentally demonstrated. The sensor consists of a taper followed by a short section of a multi-mode fiber (MMF) and a dispersion com- pensating fiber (DCF), which is sandwiched between two single mode fibers (SMFs). The taper is used as a fiber coupler to excite cladding modes in the SMF, and these cladding modes transmit within the MMF and the DCF. The core mode and the cladding modes interfere in the DCF SMF fusion point to form intermodal interference. A well-defined interference spectrum is obtained in the experiment. Selected interference dips are used to measure the strain changes. The experimental results show that this device is sensitive to strain with the wavelength-referenced sensitivity of 2.6 pm/με and the power-referenced sensitivity of 0. 0027 dB/με, respectively.
基金Supported by the National Natural Science Foundation of China (No.10174057, 90201011) and the Key Project of Chinese Ministry of Education (No.105148).
文摘To suppress the dispersion effect, an improved scheme was proposed for Mach-Zehnder intefferometer (MZI) based interleaver. The device consists of an MZI, a fiber loop (FL), and a phase shifter inserted in FL. The introduction of π phase shifter into FI, dramatically suppresses the dispersion effiect. Then the transmission response remains square-like shape, with low frequency deviation and high extinction ratio. Moreover, the lower frequency deviation is achieved by reducing the dispersion coefficient. For 100GHz-spacing interleaver, the 0.08nm deviation is reduced to 0.02nm by replacing G.652 with G.655.
基金National Natural Science Foundation of China(No.61461024)Foundation of a Hundred Youth Talent Training Program of Lanzhou Jiaotong University(No.1520220232)。
文摘To improve the output characteristics of all-fiber Mach-Zehnder interferometer(MZI)-interleaver,a dual microring-assisted MZI interleaver is designed.According to its structure,the output expression of the device is derived from the signal flow diagram.After simulation analysis,the optimal structural parameters during the transmission process are obtained.In addition,the coupling coefficient and transmission loss of the coupler are analyzed.The results show that the improved interleaver output line wave is closer to the square wave,and its 25 dB cutoff band bandwidth and 0.5 dB passband bandwidth are significantly improved,with the values of 41.2 GHz and 18.9 GHz,respectively.The device has a certain resistantability to deviation,and the transmission loss has less influence on the extinction characteristics of the filter.
基金supported by the National Natural Science Foundation of China (No. 40774067)the Applied Basic Research Program of Sichuan Province, China (No. 07JY029-135)
文摘An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferometer with a LiNbO3 photoelastic waveguide has been designed, which is capable of detecting seismic acceleration in high-accuracy seismic exploration. The Mach-Zehnder interferometer was successfully fabricated and a lighting test used to check its quality. The frequency response characteristic of the accelerometer was measured2 The accelerometer with a resonant frequency of 3549 Hz was demonstrated to show good linear frequency responding characteristics in the range of 100-3000 Hz. The accelerometer also shows good stability and consistency. Experimental results indicate that the outputs of the on- and cross-axis are 147 and 21.3 mV, respectively.
基金Acknowledgements This work was supported by the National Natural Science Foundation of China (Nos. 61275083 and 61290315) and the Fundamental Research Funds for the Central Universities (HUST: No. 2014CG002).
文摘A new in-line Mach-Zehnder interferometer (MZI) sensor consisting of a stub of multi-mode fiber and an up-taper was proposed and demonstrated. Temperature measurement can be carried out by detecting wavelength shift. Dependency of sensitivity on interferometer length and dip wavelength was discussed. Experimental results showed a maximum temperature sensitivity of 113.6pm/℃ can be achieved, which is superior to most fiber temperature sensors based on in-line MZIs within the range from 20℃ to 80℃, also a good mechanical strength can be obtained. The proposed sensor is a good candidate for temperature measurement, due to the advantages of simple structure, easy fabrication, cost- effective and high sensitivity.
文摘Nonlinear materials have been well established as photo refractive switching material. Important applica- tions of isotropic nonlinear materials are seen in self-focusing, defocusing phenomena, switching systems, etc. The nonlinear correction term is basically responsible for the optical switches. Mach-Zehnder inter- ferometer (MZI) is a well-known arrangement for determining the above correction term, but there are some major problems for finding out the term by MZI. We propose a new method of finding the nonlinear correction term as well as the second order nonlinear susceptibility of the materials by using a modified MZI system. This method may be used to find out the above parameters for any unknown nonlinear material.
基金Acknowledgements This work was supported by the National Basic Research Program of China (No. 2014CB340005), the National Natural Science Foundation of China (Grant Nos. 61205054 and 61371029),Zhejiang Provincial Natural Science Foundation of China (Nos. Z1110330 and LQ 12F05006), the Excellent Young Faculty Awards Program (Zijin Plan) at ZhejiangUniversity.
文摘Graphene has shown promising perspectives in optical active components due to the large active-control of its permittivity-variation. This paper systematically reviews the recent developments ofgraphene-based optical modulators, including material property, different integration schemes, single-layer graphene-based modulator, multi-layer and few-layer graphene-based modulators, corresponding figure-of-merits, wavelength/temperature tolerance, and graphene-based fiber-optic modulator. The different treatments for graphene's isotropic and aniso- tropic property were also discussed. The results showed graphene is an excellent material for enhancing silicon's weak modulation capability after it is integrated into the silicon platform, and has great potentials for complemen- tary metal oxide semiconductor (CMOS) compatible optical devices, showing significant influence on optical interconnects in future integrated optoelectronic circuits.