Double-pass forward and double-pass backward erbium-doped super-fluorescent fiber sources（EDSFSs） were combined in one configuration.A 980 nm laser diode pumped the same erbium-doped fiber from both directions using...Double-pass forward and double-pass backward erbium-doped super-fluorescent fiber sources（EDSFSs） were combined in one configuration.A 980 nm laser diode pumped the same erbium-doped fiber from both directions using a coupler as a power splitter.The double-pass configuration was achieved by coating the fiber end face.Firstly,an optimal fiber length was found to obtain a high stability of output light wavelength with pump power, and then 1530/1550 nm wavelength division multiplexing was used for spectrum planarization,which expanded the bandwidth to more than 22 nm.The final step was a test of temperature stability.The results show that the rate of the central wavelength change kept to below 3.5 ppm/℃in the range of -40 to 60℃and 1-2 ppm/℃in the range of 20-30℃.Considering all the three factors of the fiber optic gyro applications,we selected 80 mA as the pump current,in which case the central wavelength temperature instability was calculated as 2.70 ppm/℃, 3 dB bandwidth 22.85 nm,spectral flatness 0.2 dB,output power 5.17 mW and power efficiency up to 9.92%.This experimental result has a significant reference value to the selection of devices and proper design of ED-SFSs for the application of high-precision fiber optic gyroscopes.展开更多
文摘Double-pass forward and double-pass backward erbium-doped super-fluorescent fiber sources（EDSFSs） were combined in one configuration.A 980 nm laser diode pumped the same erbium-doped fiber from both directions using a coupler as a power splitter.The double-pass configuration was achieved by coating the fiber end face.Firstly,an optimal fiber length was found to obtain a high stability of output light wavelength with pump power, and then 1530/1550 nm wavelength division multiplexing was used for spectrum planarization,which expanded the bandwidth to more than 22 nm.The final step was a test of temperature stability.The results show that the rate of the central wavelength change kept to below 3.5 ppm/℃in the range of -40 to 60℃and 1-2 ppm/℃in the range of 20-30℃.Considering all the three factors of the fiber optic gyro applications,we selected 80 mA as the pump current,in which case the central wavelength temperature instability was calculated as 2.70 ppm/℃, 3 dB bandwidth 22.85 nm,spectral flatness 0.2 dB,output power 5.17 mW and power efficiency up to 9.92%.This experimental result has a significant reference value to the selection of devices and proper design of ED-SFSs for the application of high-precision fiber optic gyroscopes.
