We report a unique case of lumbar disc herniation, in particular, with end-plate and surrounded by extensive ossification, mimicking a tumor with calcification. A 69-year-old female suffered from right buttock and leg...We report a unique case of lumbar disc herniation, in particular, with end-plate and surrounded by extensive ossification, mimicking a tumor with calcification. A 69-year-old female suffered from right buttock and leg pain. Computed tomography (CT) showed an intracanalar mass with calcification or ossification, which most likely originated from the vertebral body at the L1/2 level epidural space. On a T1-weighted gadolinium magnetic resonance image, the capsule of the mass was enhanced and not only the content of the mass but also that of the L2 vertebral body were partially and slightly enhanced. The final pathological diagnosis was disc herniation with end-plate fracture and secondary ossification. A combination of these pathological conditions as accompanied by both end-plate fractures and extensive secondary ossifications has not been previously reported. This rare pathological condition needs to be recognized as a differential diagnosis.展开更多
Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperat...Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.展开更多
This study involves the development of an analytical model for understanding the behavior of the extended, stiffened end-plate moment connections with eight high strength bolts. Modeling of the connection as an assemb...This study involves the development of an analytical model for understanding the behavior of the extended, stiffened end-plate moment connections with eight high strength bolts. Modeling of the connection as an assemblage of finite elements (FE) used for load deformation analysis, with material, and contact nonlinearities are developed. Results from the FE mathematical model are verified with results from the ANSYS computer program as well as with the test results. Sensitivity and feasibility studies are carried out. Significant geometry and force related variables are introduced;and by varying the geometric variables of the connections within a practical range, a matrix of test cases is obtained. Maximum end-plate separation, maximum bending stresses in the end-plate, and the forces from the connection bolts for these test cases are obtained. From the FE analysis, a database is produced to collect results for the artificial neural network analysis. Finally, salient features of the optimized Artificial Neural Network (ANN) via Genetic Algorithm (GA) analysis are introduced and implemented with the aim of predicting the overall behavior of the connection.展开更多
Based on the dynamic theories of water waves and Mindlin plates, the analytic solution of interaction between smface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the W...Based on the dynamic theories of water waves and Mindlin plates, the analytic solution of interaction between smface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique. Firstly, without regard for elastic edge restraint, the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results. Therefore, it can be shown that the present method is valid. Secondly, three end-restraint cases （i.e., the left-end elastic restraints, the both-end elastic restraints, and the right-end elastic restraints） are proposed to reduce the vibration of floating plates, in which the spring is used to connect the sea bottom and the floating plate＇ s left （ or right ） edge. The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed. Moreover, the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.展开更多
Resistive Plate Chambers(RPCs) built from a new type of Bakelite developed at Institute of High Energy Physics(IHEP),Chinese Academy of Sciences have been used in the BESⅢ Muon identification system for several years...Resistive Plate Chambers(RPCs) built from a new type of Bakelite developed at Institute of High Energy Physics(IHEP),Chinese Academy of Sciences have been used in the BESⅢ Muon identification system for several years without linseed oil coating,but characteristic aging performances were observed.To adapt to the RPCs in the aging state,the front-end electronics have been upgraded by enhancing the front-end protection,improving the threshold setting circuit,and separating power supplies of the comparator and the field programmable gate array(FPGA).Improvements in system stability,front-end protection and threshold consistency have been achieved.In this paper,the system upgrade and the test results are described in detail.展开更多
文摘We report a unique case of lumbar disc herniation, in particular, with end-plate and surrounded by extensive ossification, mimicking a tumor with calcification. A 69-year-old female suffered from right buttock and leg pain. Computed tomography (CT) showed an intracanalar mass with calcification or ossification, which most likely originated from the vertebral body at the L1/2 level epidural space. On a T1-weighted gadolinium magnetic resonance image, the capsule of the mass was enhanced and not only the content of the mass but also that of the L2 vertebral body were partially and slightly enhanced. The final pathological diagnosis was disc herniation with end-plate fracture and secondary ossification. A combination of these pathological conditions as accompanied by both end-plate fractures and extensive secondary ossifications has not been previously reported. This rare pathological condition needs to be recognized as a differential diagnosis.
基金This research was supported by the National Natural Science Foundation of China （51171093）.
文摘Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.
文摘This study involves the development of an analytical model for understanding the behavior of the extended, stiffened end-plate moment connections with eight high strength bolts. Modeling of the connection as an assemblage of finite elements (FE) used for load deformation analysis, with material, and contact nonlinearities are developed. Results from the FE mathematical model are verified with results from the ANSYS computer program as well as with the test results. Sensitivity and feasibility studies are carried out. Significant geometry and force related variables are introduced;and by varying the geometric variables of the connections within a practical range, a matrix of test cases is obtained. Maximum end-plate separation, maximum bending stresses in the end-plate, and the forces from the connection bolts for these test cases are obtained. From the FE analysis, a database is produced to collect results for the artificial neural network analysis. Finally, salient features of the optimized Artificial Neural Network (ANN) via Genetic Algorithm (GA) analysis are introduced and implemented with the aim of predicting the overall behavior of the connection.
基金This work was supported by the National Natural Science Foundation of China(Grant No.19972018)Distin-guished Young Scholar Science Foundation of Heilongjiang Province of China.
文摘Based on the dynamic theories of water waves and Mindlin plates, the analytic solution of interaction between smface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique. Firstly, without regard for elastic edge restraint, the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results. Therefore, it can be shown that the present method is valid. Secondly, three end-restraint cases （i.e., the left-end elastic restraints, the both-end elastic restraints, and the right-end elastic restraints） are proposed to reduce the vibration of floating plates, in which the spring is used to connect the sea bottom and the floating plate＇ s left （ or right ） edge. The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed. Moreover, the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.
文摘Resistive Plate Chambers(RPCs) built from a new type of Bakelite developed at Institute of High Energy Physics(IHEP),Chinese Academy of Sciences have been used in the BESⅢ Muon identification system for several years without linseed oil coating,but characteristic aging performances were observed.To adapt to the RPCs in the aging state,the front-end electronics have been upgraded by enhancing the front-end protection,improving the threshold setting circuit,and separating power supplies of the comparator and the field programmable gate array(FPGA).Improvements in system stability,front-end protection and threshold consistency have been achieved.In this paper,the system upgrade and the test results are described in detail.
