In order to solve the flow mismatch problem between pumping source output and workload demand,a novel configuration of D + A combined multi-pump controlled hydraulic system,similar to a pump-controlled system,is propo...In order to solve the flow mismatch problem between pumping source output and workload demand,a novel configuration of D + A combined multi-pump controlled hydraulic system,similar to a pump-controlled system,is proposed for a large power hydraulic system in this study. This novel configuration consists of several parallel fixed displacement pumps of different sizes and proportional variable displacement pumps,which is controlled by digital signal( on/off) and analog signal respectively( D + A pumps). The system flow is divided into two parts,one is the total flow from fixed displacement pumps,and the other is the rest desired flow supplied by variable displacement pumps to smooth and improve the demand flow. First,basic design principles and evaluation indicators of the proposed system are introduced. Then,a flow state matrix of the binary-coding digital pumps( 1: 2: 4) is obtained to provide the control signals of pumps. Experimental results show that the system output flow tracks well with acceptable flow deviation,though a little lag behind input signal.展开更多
First principles plane wave pseudopotential method was executed to calculate the mechanical properties with respect to the uranium-0.95 mass fraction of titanium （U-0.95 mass fraction of Ti） alloy for quenching and ...First principles plane wave pseudopotential method was executed to calculate the mechanical properties with respect to the uranium-0.95 mass fraction of titanium （U-0.95 mass fraction of Ti） alloy for quenching and aging, including the elastic modulus, the value of shear modulus to bulk modulus （G/B） and the ideal tensile strength. The further research has also been done about the crack mechanism through Griffith rupture energy. These results show that the elastic moduli are 195.1 GPa for quenching orthorhombic ~ phase and 201.8 GPa for aging formed Guinier-Preston （G.P） zones, while G/B values are 0.67 and 0.56, respectively. With the phase change of uranium-titanium （U-Ti） alloy via the quenching treatment, the ideal tensile strength is diverse and distinct with dif- ferent crystal orientations of the anisotropic ~ phase. Comparison of quenching and short time aging treatment, both of the strength and toughness trend to improve slightly. Further analysis about electronic density of states （DOS） in the electronic scale indicates that the strength increases continuously while toughness decreases with the aging proceeding. The equilibrium structure appears in overaging process, as a result of decomposition of metastable quenching 7 phase. Thereby the strength and toughness trend to decrease slightly. Finally, the ideal fracture energies of G.P zones and overaging structure are obtained within the framework of Griffith fracture theory, which are 4.67 J/m2 and 3.83 J/m2, respectively. These results theoretically demonstrate strengthening effect of quenching and aging heat treatment on U-Ti alloy.展开更多
基金Supported by the National Natural Science Foundation of China(No.51575471)the Key Project of Natural Science Foundation of Hebei Province(No.E2016203264)
文摘In order to solve the flow mismatch problem between pumping source output and workload demand,a novel configuration of D + A combined multi-pump controlled hydraulic system,similar to a pump-controlled system,is proposed for a large power hydraulic system in this study. This novel configuration consists of several parallel fixed displacement pumps of different sizes and proportional variable displacement pumps,which is controlled by digital signal( on/off) and analog signal respectively( D + A pumps). The system flow is divided into two parts,one is the total flow from fixed displacement pumps,and the other is the rest desired flow supplied by variable displacement pumps to smooth and improve the demand flow. First,basic design principles and evaluation indicators of the proposed system are introduced. Then,a flow state matrix of the binary-coding digital pumps( 1: 2: 4) is obtained to provide the control signals of pumps. Experimental results show that the system output flow tracks well with acceptable flow deviation,though a little lag behind input signal.
基金supported by Shanghai Supercomputer Center and High Performance Computing Center,Shanghai Universitysupported by the National Natural Science Foundation of China(Grant Nos.51074103 and 51104098)Shanghai Scientific Selection and Cultivation for outstanding young teachers in special fund and Innovation Program of Shanghai University(Grant No.SDCX2012011)
文摘First principles plane wave pseudopotential method was executed to calculate the mechanical properties with respect to the uranium-0.95 mass fraction of titanium （U-0.95 mass fraction of Ti） alloy for quenching and aging, including the elastic modulus, the value of shear modulus to bulk modulus （G/B） and the ideal tensile strength. The further research has also been done about the crack mechanism through Griffith rupture energy. These results show that the elastic moduli are 195.1 GPa for quenching orthorhombic ~ phase and 201.8 GPa for aging formed Guinier-Preston （G.P） zones, while G/B values are 0.67 and 0.56, respectively. With the phase change of uranium-titanium （U-Ti） alloy via the quenching treatment, the ideal tensile strength is diverse and distinct with dif- ferent crystal orientations of the anisotropic ~ phase. Comparison of quenching and short time aging treatment, both of the strength and toughness trend to improve slightly. Further analysis about electronic density of states （DOS） in the electronic scale indicates that the strength increases continuously while toughness decreases with the aging proceeding. The equilibrium structure appears in overaging process, as a result of decomposition of metastable quenching 7 phase. Thereby the strength and toughness trend to decrease slightly. Finally, the ideal fracture energies of G.P zones and overaging structure are obtained within the framework of Griffith fracture theory, which are 4.67 J/m2 and 3.83 J/m2, respectively. These results theoretically demonstrate strengthening effect of quenching and aging heat treatment on U-Ti alloy.
