In order to assess the performance of a new cleansing and combustion-improving gasoline additive （MAZ）, and to explore the evaluation methods of additives, two engines with the same model number and performance indi...In order to assess the performance of a new cleansing and combustion-improving gasoline additive （MAZ）, and to explore the evaluation methods of additives, two engines with the same model number and performance indices, fueled with and without the MAZ gasoline additive respectively, are carried through 100 h strenuous tests on a bench. The results obtained in full load characteristic and load characteristics of different operational modes are compared. It indicates that the power, economy and emission of the engine fueled with the MAZ additive all have obvious improvement in comparison with the engine without adding the additive： the power increasing by 16.43%, specific fuel consumption （SFC） decreasing 5.39%, and the emission of CO, HC and NOx falling by 28.61%, 54.38% and 10.1% respectively. Wear and tear of the engine cylinder is weakened, and sediment of combustion chamber inner side is reduced. In addition, no negative effect on the catalytic conversion device is found.展开更多
Mixed-mode I-II crack-based fatigue crack propagation(FCPⅠ-Ⅱ)usually occurs in engineering structures;however,no theoretical formula or effective compliance test methods have been established for FCPI-IIto date.For ...Mixed-mode I-II crack-based fatigue crack propagation(FCPⅠ-Ⅱ)usually occurs in engineering structures;however,no theoretical formula or effective compliance test methods have been established for FCPI-IIto date.For mixed-mode I-II flawed components,based on the principle of mean-value energy equivalence,we propose a theoretical method to describe the relationship between material elastic parameters,geometrical dimensions,load(or displacement),and energy.Based on the maximum circumferential stress criterion,we propose a uniform compliance model for compact tensile shear(CTS)specimens with horizontal cracks deflecting and propagating(flat-folding propagation)under different loading angles,geometries,and materials.Along with an innovative design of the fixture of CTS specimens used for FCPI-IItests,we develop a new compliancebased testing method for FCPⅠ-Ⅱ.For the 30Cr2Ni4MoV rotor steel,the FCP rates of modeⅠ,modeⅡ,and mixed-modeⅠ-Ⅱcracks were obtained via FCP tests using compact tension,Arcan,and CTS specimens,respectively.The obtained da/d N versusΔJ curves of the FCP rates are close.The loading angleαand dimensionless initial crack length a0/W demonstrated negligible effects on the FCP rates.Hence,the FCP rates of mode I crack can be used to predict the residual life of structural crack propagation.展开更多
基金This project is supported by Provincial Natural Science Foundation of Guangdong, China and Provincial Environmental Protection Science Foundation of Guangdong, China(No.320-D3800).
文摘In order to assess the performance of a new cleansing and combustion-improving gasoline additive （MAZ）, and to explore the evaluation methods of additives, two engines with the same model number and performance indices, fueled with and without the MAZ gasoline additive respectively, are carried through 100 h strenuous tests on a bench. The results obtained in full load characteristic and load characteristics of different operational modes are compared. It indicates that the power, economy and emission of the engine fueled with the MAZ additive all have obvious improvement in comparison with the engine without adding the additive： the power increasing by 16.43%, specific fuel consumption （SFC） decreasing 5.39%, and the emission of CO, HC and NOx falling by 28.61%, 54.38% and 10.1% respectively. Wear and tear of the engine cylinder is weakened, and sediment of combustion chamber inner side is reduced. In addition, no negative effect on the catalytic conversion device is found.
基金the National Key Research and Development Program of China(Grant No.2017YFB0702200)the National Natural Science Foundation of China(Grant No.11872320)the Policy Guidance Program of Jiangsu Province(Grant No.BZ2020057)。
文摘Mixed-mode I-II crack-based fatigue crack propagation(FCPⅠ-Ⅱ)usually occurs in engineering structures;however,no theoretical formula or effective compliance test methods have been established for FCPI-IIto date.For mixed-mode I-II flawed components,based on the principle of mean-value energy equivalence,we propose a theoretical method to describe the relationship between material elastic parameters,geometrical dimensions,load(or displacement),and energy.Based on the maximum circumferential stress criterion,we propose a uniform compliance model for compact tensile shear(CTS)specimens with horizontal cracks deflecting and propagating(flat-folding propagation)under different loading angles,geometries,and materials.Along with an innovative design of the fixture of CTS specimens used for FCPI-IItests,we develop a new compliancebased testing method for FCPⅠ-Ⅱ.For the 30Cr2Ni4MoV rotor steel,the FCP rates of modeⅠ,modeⅡ,and mixed-modeⅠ-Ⅱcracks were obtained via FCP tests using compact tension,Arcan,and CTS specimens,respectively.The obtained da/d N versusΔJ curves of the FCP rates are close.The loading angleαand dimensionless initial crack length a0/W demonstrated negligible effects on the FCP rates.Hence,the FCP rates of mode I crack can be used to predict the residual life of structural crack propagation.
