Mathematical Model with Energy and Clustering Energy Based Routing Protocols as Remediation to the Directional Source Aware Routing Protocol in Wireless Sensor Networks

In this paper, a routing protocol for wireless sensor network, baptized energy based protocol (EBP) is proposed. Wireless sensor network presents many challenges and constraints, and one of the major constraints is the routing problem. Due to the limited energy of sensor nodes, routing in this type of network shall perform efficiently to maximize the network lifetime. One of the proposed algorithms is the directional source aware routing protocol (DSAP) which, after simulation, showed a lot of limitations and drawbacks. The modified directional source aware routing protocol (MDSAP) was proposed by the authors of this paper to address some of the DSAP’s limitations but remains limited to a fixed topology, fixed source and stationary nodes. So EBP is proposed and operated under different scenarios and showed, after its simulation using TinyOS, many advantages in terms of load balancing, free looping, minimizing packet error rate and maximizing network lifetime.

Saturable Absorption Enchantment of Au Nanorods Based on Energy Transfer between Longitudinal and Transverse Energy Levels

Four kinds of Au nanorods（NRs）with different aspect ratios are designed to adjust the relationship between resonance energy level of longitudinal（L）and transverse（T）modes.During the femto-second Z-scan experiments,huge saturable absorption phenomena are observed while the energy level T is located between one to two times of the energylevel L.This means that the energy may transfer between longitudinal and transverse energylevels in the same and/or different Au NRs.It effectively depresses the production of revised saturated absorption and increases the saturable absorption efficiency.This method is significant for the preparation of high-efficiency saturable absorption devices.

Huaibei City——A Newly-Developed Energy Source Base in China

A newly developed energy source basein China,Huaibei City,is located inthe northern part of Anhui Province,under the direct control of the provincialgovernment.Under its jurisdiction,there arethree districts and one county,covering atotal area of 2725 sq km and with a populationof 1.8 million. The city boasts unique mineralresources.A total of 13 minerals have beensurveyed,including coal,iron and kaoline.The reserves of coal,the richest of all,areestimated at about 10 billion tons and theprospective reserves 35 billion tons.Basedon its coal resources,the city has set up 24pairs of large and modern mines with anannual production capacity of 20 milliontons,ranking fifth in the country.The

Thermal Insulation Materials of Alumina Based Porous Ceramics

Significant energy saving effects can be made through the improvement of furnace refractories,especially the thermal insulation refractories. In this study,the preparation and the application of different alumina based porous ceramics were briefly introduced. Alumina based porous ceramics were prepared combined foaming method with gelcasting,sol- gel process or cement curing process. The influences of different preparation methods on the sintering shrinkage, porosity, phase composition, microstructure, compressive strength and thermal conductivity were discussed. Alumina based porous ceramics with relatively high strength and low thermal conductivity could be obtained through the above mentioned methods. Compared with the traditional lining materials,about 40% energy could be saved when they were used as the furnace wall.

Investigation on the Dielectric Properties of CO2 and CO2-Based Gases Based on the Boltzmann Equation Analysis

In this paper, the dielectric properties of CO2, CO2/air, CO2/O2, CO2/N2, CO2/CF4, CO2/CH4, CO2/He, C02/H2, CO2/NH3 and CO2/CO were investigated based on the Boltzmann equation analysis, in which the reduced critical electric field strength （E/N）cr of the gases was derived from the calculated electron energy distribution function （EEDF） by solv- ing the Boltzmann transport equation. In this work, it should be noted that the fundamental data were carefully selected by the published experimental results and calculations to ensure the validity of the calculation. The results indicate that if He, H2, N2 and CH4, in which there axe high ionization coefficients or a lack of attachment reactions, are added into CO2, the dielectric properties will decrease. On the other hand, air, O2, NH3 and CFa （ranked in terms of （E/N）cr value in increasing order） have the potential to improve the dielectric property of CO2 at room temperature.

Optimal Configuration Method for the Installed Capacity of the Solar-Thermal Power Stations

Because of the randomness of wind power and photovoltaic(PV)output of new energy bases,the problem of peak regulation capability and voltage stability of ultra-high voltage direct current(UHVDC)transmission lines,we proposed an optimum allocation method of installed capacity of the solar-thermal power station based on chance constrained programming in this work.Firstly,we established the uncertainty model of wind power and PV based on the chance constrained planning theory.Then we used the K-medoids clusteringmethod to cluster the scenarios considering the actual operation scenarios throughout the year.Secondly,we established the optimal configuration model based on the objective function of the strongest transient voltage stability and the lowest overall cost of operation.Finally,by quantitative analysis of actual wind power and photovoltaic new energy base,this work verified the feasibility of the proposed method.As a result of the simulations,we found that using the optimal configuration method of solar-thermal power stations could ensure an accurate allocation of installed capacity.When the installed capacity of the solar-thermal power station is 1×106 kW,the transient voltage recovery index(TVRI)is 0.359,which has a strong voltage support capacity for the system.Based on the results of this work,the optimal configuration of the installed capacity of the solar-thermal power plant can improve peak shaving performance,transient voltage support capability,and new energy consumption while satisfying the Direct Current(DC)outgoing transmission premise.

Trophic relationships in the Changjiang River estuarine salt marshes: preliminary investigation from δ^(13)C and δ^(15)N analysis

To obtain information on food web structure in salt marshes of the Changjiang （Yangtze） River Estuary, the （ δ3C and δ15N values of primary producers and consumers were determined. The mean δ13C values of 31 dominant consumers ranged from -23.13‰ to -14.37‰. Except for several species （ Eriocheir sinensis, Sinonovacula constricta and Potamocorbula ustulata）, consumers had interme- diate δ13C values between those of benthic microalgae and Spartina alterniflora. The mean δ15N values of 31 dominant consumers varied between 6.87‰ and 13.33‰, which indicate three trophic levels in salt marshes of the Changjiang River Estuary. A total of 18 macroinvertebrates species and four fish species represented primary consumers with trophic levels ranging from 2.0 to 2.7. Secondary consumers included two maeroinvertebrates and seven fishes with trophic levels varying between 3.0 and 3.9. The consumers were divided into three trophic guilds, i.e., detritivorous/algae feeders, omnivores and carnivores. The detrital food chain was the main energy flow pathway in the salt marsh food web of the Changjiang River Estuary, and the marsh vascular plants were at least as equally important as microphytobenthos for secondary production. The important trophic function of the salt marsh habitats in the estuary is revealed.

Research advances of magnesium and magnesium alloys worldwide in 2021

More than 4000 papers in the field of Mg and Mg alloys were published and indexed in Web of Science(WoS)Core Collection database in 2021.The bibliometric analyses indicate that the microstructure,mechanical properties,and corrosion of Mg alloys still are the main research focus.Mg ion batteries and hydrogen storage Mg materials have attracted much attention.Significant contributions to the research and development of magnesium alloys were made by Chongqing University,Shanghai Jiaotong University,and Chinese Academy of Sciences in China,Helmholtz Zentrum Hereon in Germany,Ohio State University in the United States,the University of Queensland in Australia,Kumanto University in Japan,and Seoul National University in Korea,University of Tehran in Iran,etc..This review is aimed to summarize the progress in the development of structural and functional Mg and Mg alloys in 2021.Based on the issues and challenges identified here,some future research directions are suggested.

A new interpolating method based on the variation of spectra energy using CMOS array

A new interpolating method to enhance the resolution of gratings using complementary metal-oxide semiconductor （CMOS） according to the variation of soIne specified spectral light intensities during the motion of scale grating in a periodic separation is proposed. CMOS image sensor （pixel array 648 × 488） was also introduced as receiving device and its stability was verified experimentally. Many factors m the experiment were analyzed theoretically and contrasted with experiment. The advantages of this novel method were featured by CMOS and the specified spectral variation of the energy distribution was discussed.

Charging-rate-based Battery Energy Storage System in Wind Farm and Battery Storage Cooperation Bidding Problem

Wind power has been proven to have the ability to participate in the frequency modulation(FM)market.Using batteries to improve wind power stability can better aid wind farms participating in the FM market.Battery energy storage system(BESS)has a promising future in applying regulation and load management in the power grid.For regulation services,normally,the regulation power prediction is estimated based on the required maximum regulation capacity;the power needed for the specific regulation service is unknown to the BESS owner.However,this information is needed in the regulation model when formulating the linearised BESS model with a constraint on the state of charge(SoC).This compromises the accuracy of the model greatly when it is applied for regulation service.Moreover,different control strategies can be employed by BESS.However,the current depth of discharge(DoD)based models have difficulties in being used in a linearization problem.Due to the consideration of the control strategy,the model becomes highly nonlinear and cannot be solved.In this paper,a charging rate(C-rate)based model is introduced,which can consider different control strategies of a BESS for cooperation with wind farms to participate in wind farm estimation error compensation,load management,energy bid,and regulation bid.First,the limitation of conventional BESS models are listed,and a new C-rate-based model is introduced.Then the C-rate-based BESS model is adopted in a wind farm and BESS cooperation scheme.Finally,experimental studies are carried out,and the DoD model and C-rate model optimization results are compared to prove the rationality of the C-rate model.

A novel tin-graphite dual-ion battery based on the sodium-ion electrolyte with high energy density

Subject Code:E02With the support by the National Natural Science Foundation of China and the Chinese Academy of Sciences,the research team led by Prof.Tang Yongbing(唐永炳)at the Functional Thin Films Research Center,Shenzhen Institutes of Advanced Technology,Chinese Academy of Sciences,developed a novel tin-graphite dual-ion battery based on sodium-ion electrolyte with high energy density,which

Jizhong Energy Group Mulls Salt Chemical Base

The Hebei provincial government recentlyapproved Jizhong Energy Group Co.,Ltd.to develop the salt mine reserve inNingjin county,Xingtai,Hebei provinceto build an important salt chemical basein China.It was predicted that the recentlyproved salt mine has a salt reserve of morethan 100 billion tons,with an

A zincophilic molecular brush for a dendrite-free,corrosionresistant,zinc metal anode with a long life cycle

Zinc-based aqueous rechargeable batteries have attracted extensive attention due to their low cost,safety,and environmental friendliness.However,dendrite growth and hydrogen evolution of Zn anodes limit their large-scale application.A new strategy to produce a polyacrylamide/reduced graphene oxide(PAM@rGO)molecular nanobrush coating and control Zn electrolyte interface engineering is proposed for use in highly reversible Zn plating/stripping.Hydrogen evolution is inhibited,and Zn deposition is consolidated using the rich zincophilic functional groups of the branched polyacrylamide chain and the high conductivity of rGO.Due to the synergistic effects of corrosion resistance and dendrite-free growth,PAM@rGO/Zn provides prolonged and reversible Zn plating/stripping.Density functional theory(DFT)calculations expand on homogenized nucleation.The PAM@rGO/Zn||activated carbon(AC)capacitor exhibits long cyclic stability,fast ion transfer,and minimal interfacial impedance.This study provides experimental and theoretical bases for the structural design of Zn anode.

Coarsening Kinetics of γ' Precipitates in Dendritic Regions of a Ni_3 Al Base Alloy

Coarsening behavior of γ＇ precipitates in the dendritic regions of a Ni 3 Al base alloy containing chromium,molybdenum,zirconium and boron was investigated.Annealing treatment was performed up to 50 h at 900,1000 and 1100℃.The alloy was produced by vacuum-arc remelting technique.Results show that coarsening of the γ＇ precipitates in this complex alloy containing high volume fractions of γ＇ phase follows Lifshitz-Slyozov-Wagner（LSW） theory.Coarsening activation energy of the γ＇ precipitates was evaluated to be about 253.5 kJ.mol-1 which shows that the growth phenomenon is controlled by volume diffusion of aluminum.With an innovative approach,diffusion coefficient of the solute element（s） and the interfacial energy between γ＇ precipitates and γ＇（matrix） were estimated at 900,1000 and 1100℃.Accordingly,the interfacial energies at 900,1000 and 1100℃ are 4.49±1.48,2.08±0.69 and 0.98±0.32 mJ.m-2,respectively.Also the diffusivities of solute element（s） at these temperatures are 3.41±1.08,30±9.5 and 145.15±45.85（10-15 m-2.s-1）,respectively.

Hierarchical approach for fatigue cracking performance evaluation in asphalt pavements

In this paper, a hierarchical approach is proposed for the evaluation of fatigue cracking in asphalt concrete pavements considering three different levels of complexities in the representation of the material behaviour, design parameters characterization and the determination of the pavement response as well as damage computation. Based on the developed hierarchical approach, three damage computation levels are identified and proposed. The levels of fatigue damage analysis provides pavement engineers a variety of tools that can be used for pavement analysis depending on the availability of data, required level of prediction accuracy and computational power at their disposal. The hierarchical approach also provides a systematic approach for the understanding of the fundamental mechanisms of pavement deterioration, the elimination of the empiricism associated with pavement design today and the transition towards the use of sound principles of mechanics in pavement analysis and design.