Effects of connected automated vehicle on stability and energy consumption of heterogeneous traffic flow system

With the development of intelligent and interconnected traffic system,a convergence of traffic stream is anticipated in the foreseeable future,where both connected automated vehicle(CAV)and human driven vehicle(HDV)will coexist.In order to examine the effect of CAV on the overall stability and energy consumption of such a heterogeneous traffic system,we first take into account the interrelated perception of distance and speed by CAV to establish a macroscopic dynamic model through utilizing the full velocity difference(FVD)model.Subsequently,adopting the linear stability theory,we propose the linear stability condition for the model through using the small perturbation method,and the validity of the heterogeneous model is verified by comparing with the FVD model.Through nonlinear theoretical analysis,we further derive the KdV-Burgers equation,which captures the propagation characteristics of traffic density waves.Finally,by numerical simulation experiments through utilizing a macroscopic model of heterogeneous traffic flow,the effect of CAV permeability on the stability of density wave in heterogeneous traffic flow and the energy consumption of the traffic system is investigated.Subsequent analysis reveals emergent traffic phenomena.The experimental findings demonstrate that as CAV permeability increases,the ability to dampen the propagation of fluctuations in heterogeneous traffic flow gradually intensifies when giving system perturbation,leading to enhanced stability of the traffic system.Furthermore,higher initial traffic density renders the traffic system more susceptible to congestion,resulting in local clustering effect and stop-and-go traffic phenomenon.Remarkably,the total energy consumption of the heterogeneous traffic system exhibits a gradual decline with CAV permeability increasing.Further evidence has demonstrated the positive influence of CAV on heterogeneous traffic flow.This research contributes to providing theoretical guidance for future CAV applications,aiming to enhance urban road traffic efficiency and alleviate congestion.

Joint Optimization of Energy Consumption and Network Latency in Blockchain-Enabled Fog Computing Networks

Fog computing is considered as a solution to accommodate the emergence of booming requirements from a large variety of resource-limited Internet of Things(IoT)devices.To ensure the security of private data,in this paper,we introduce a blockchain-enabled three-layer device-fog-cloud heterogeneous network.A reputation model is proposed to update the credibility of the fog nodes(FN),which is used to select blockchain nodes(BN)from FNs to participate in the consensus process.According to the Rivest-Shamir-Adleman(RSA)encryption algorithm applied to the blockchain system,FNs could verify the identity of the node through its public key to avoid malicious attacks.Additionally,to reduce the computation complexity of the consensus algorithms and the network overhead,we propose a dynamic offloading and resource allocation(DORA)algorithm and a reputation-based democratic byzantine fault tolerant(R-DBFT)algorithm to optimize the offloading decisions and decrease the number of BNs in the consensus algorithm while ensuring the network security.Simulation results demonstrate that the proposed algorithm could efficiently reduce the network overhead,and obtain a considerable performance improvement compared to the related algorithms in the previous literature.

A Two-Layer Active Power Optimization and Coordinated Control for Regional Power Grid Partitioning to Promote Distributed Renewable Energy Consumption

With the large-scale development and utilization of renewable energy,industrial flexible loads,as a kind of loadside resource with strong regulation ability,provide new opportunities for the research on renewable energy consumption problem in power systems.This paper proposes a two-layer active power optimization model based on industrial flexible loads for power grid partitioning,aiming at improving the line over-limit problem caused by renewable energy consumption in power grids with high proportion of renewable energy,and achieving the safe,stable and economical operation of power grids.Firstly,according to the evaluation index of renewable energy consumption characteristics of line active power,the power grid is divided into several partitions,and the interzone tie lines are taken as the optimization objects.Then,on the basis of partitioning,a two-layer active power optimization model considering the power constraints of industrial flexible loads is established.The upper-layer model optimizes the planned power of the inter-zone tie lines under the constraint of the minimum peak-valley difference within a day;the lower-layer model optimizes the regional source-load dispatching plan of each resource in each partition under the constraint of theminimumoperation cost of the partition,so as to reduce the line overlimit phenomenon caused by renewable energy consumption and save the electricity cost of industrial flexible loads.Finally,through simulation experiments,it is verified that the proposed model can effectively mobilize industrial flexible loads to participate in power grid operation and improve the economic stability of power grid.

Optimising Energy Consumption in SD-DCN Networks (Software Defined-Data Center Network)

Over the last decade, the rapid growth in traffic and the number of network devices has implicitly led to an increase in network energy consumption. In this context, a new paradigm has emerged, Software-Defined Networking (SDN), which is an emerging technique that separates the control plane and the data plane of the deployed network, enabling centralized control of the network, while offering flexibility in data center network management. Some research work is moving in the direction of optimizing the energy consumption of SD-DCN, but still does not guarantee good performance and quality of service for SDN networks. To solve this problem, we propose a new mathematical model based on the principle of combinatorial optimization to dynamically solve the problem of activating and deactivating switches and unused links that consume energy in SDN networks while guaranteeing quality of service (QoS) and ensuring load balancing in the network.

Economic feasibility and efficiency enhancement approaches for in situ upgrading of low-maturity organic-rich shale from an energy consumption ratio perspective

The technical feasibility of in situ upgrading technology to develop the enormous oil and gas resource potential in low-maturity shale is widely acknowledged.However,because of the large quantities of energy required to heat shale,its economic feasibility is still a matter of debate and has yet to be convincingly demonstrated quantitatively.Based on the energy conservation law,the energy acquisition of oil and gas generation and the energy consumption of organic matter cracking,shale heat-absorption,and surrounding rock heat dissipation during in situ heating were evaluated in this study.The energy consumption ratios for different conditions were determined,and the factors that influence them were analyzed.The results show that the energy consumption ratio increases rapidly with increasing total organic carbon(TOC)content.For oil-prone shales,the TOC content corresponding to an energy consumption ratio of 3 is approximately 4.2%.This indicates that shale with a high TOC content can be expected to reduce the project cost through large-scale operation,making the energy consumption ratio after consideration of the project cost greater than 1.In situ heating and upgrading technology can achieve economic benefits.The main methods for improving the economic feasibility by analyzing factors that influence the energy consumption ratio include the following:(1)exploring technologies that efficiently heat shale but reduce the heat dissipation of surrounding rocks,(2)exploring technologies for efficient transformation of organic matter into oil and gas,i.e.,exploring technologies with catalytic effects,or the capability to reduce in situ heating time,and(3)establishing a horizontal well deployment technology that comprehensively considers the energy consumption ratio,time cost,and engineering cost.

Intelligent Energy Consumption For Smart Homes Using Fused Machine-Learning Technique

Energy is essential to practically all exercises and is imperative for the development of personal satisfaction.So,valuable energy has been in great demand for many years,especially for using smart homes and structures,as individuals quickly improve their way of life depending on current innovations.However,there is a shortage of energy,as the energy required is higher than that produced.Many new plans are being designed to meet the consumer’s energy requirements.In many regions,energy utilization in the housing area is 30%–40%.The growth of smart homes has raised the requirement for intelligence in applications such as asset management,energy-efficient automation,security,and healthcare monitoring to learn about residents’actions and forecast their future demands.To overcome the challenges of energy consumption optimization,in this study,we apply an energy management technique.Data fusion has recently attracted much energy efficiency in buildings,where numerous types of information are processed.The proposed research developed a data fusion model to predict energy consumption for accuracy and miss rate.The results of the proposed approach are compared with those of the previously published techniques and found that the prediction accuracy of the proposed method is 92%,which is higher than the previously published approaches.

Research on the energy consumption mechanism and characteristics of the gallium indium tin liquid metal arcing process

For high-voltage direct current(HVDC)power grid transmission with higher voltages,the energyconsuming branch of the DC circuit breaker is required to dissipate huge energies of more than megajoules in a short time in the case of a fault and short circuit.The requirements for huge volume and weight are difficult to meet with energy-consuming equipment based on ZnO.In this paper,a new energy consumption method is proposed based on gallium indium tin(GaInSn)liquid metal in the arcing process,and a test platform with adjustable short-circuit current is built.The mechanism triggering GaInSn liquid metal arcing energy consumption is studied.It is found that short-circuit current and channel aperture are the key parameters affecting the energy consumption of liquid metal arcing.The characteristics of GaInSn liquid metal energy consumption are investigated,and four stages of liquid metal energy consumption are found:oscillatory shrinkage,arc breakdown,arc burning phase change and arc extinction.The influence of short-circuit current and channel aperture on the energy consumption characteristics of GaInSn liquid metal is investigated.To further explore the physical mechanism of the above phenomena,a magneto-hydrodynamic model of energy consumption in the GaInSn liquid metal arcing process is established.The influence of short-circuit current and channel aperture on the temperature distribution of the liquid metal arc is analyzed.The mechanism of the effect of short-circuit current and channel aperture on peak arc temperature and the temperature diffusion rate is clarified.The research results provide theoretical support for this new liquid metal energy consumption mode DC circuit breaker.

Residential Energy Consumption Forecasting Based on Federated Reinforcement Learning with Data Privacy Protection

Most studies have conducted experiments on predicting energy consumption by integrating data formodel training.However, the process of centralizing data can cause problems of data leakage.Meanwhile,many laws and regulationson data security and privacy have been enacted, making it difficult to centralize data, which can lead to a datasilo problem. Thus, to train the model while maintaining user privacy, we adopt a federated learning framework.However, in all classical federated learning frameworks secure aggregation, the Federated Averaging (FedAvg)method is used to directly weight the model parameters on average, which may have an adverse effect on te model.Therefore, we propose the Federated Reinforcement Learning (FedRL) model, which consists of multiple userscollaboratively training the model. Each household trains a local model on local data. These local data neverleave the local area, and only the encrypted parameters are uploaded to the central server to participate in thesecure aggregation of the global model. We improve FedAvg by incorporating a Q-learning algorithm to assignweights to each locally uploaded local model. And the model has improved predictive performance. We validatethe performance of the FedRL model by testing it on a real-world dataset and compare the experimental results withother models. The performance of our proposed method in most of the evaluation metrics is improved comparedto both the centralized and distributed models.

Does economic growth stimulate energy consumption?New evidence from national and regional levels in China

A detailed investigation of the nexus between economic growth and energy use is imperative for formulating sustainable development policies.In this study,we examine panel cointegration and causality relations among economic growth,energy use,capital stock,and labor in 30 Chinese provinces between 2000-2019.We conduct a comprehensive empirical analysis based on panel modeling and a neoclassical production function.The findings of the second-generation panel unit root and co-integration tests reveal that these variables have long term co-integration linkages.We then perform a panel cointegration estimation using the fully modified ordinary least squares technique and find that total energy consumption,electricity consumption,capital stock,and labor significantly influence economic growth at the national and regional levels in China.Moreover,the outcomes of the Dumitrescu-Hurlin causality test indicate the existence of a two-way causal nexus between economic output and total energy consumption at the national level,but only a causal link from GDP to total energy use in the eastern and central regions.Conversely,a causality from total energy use to economic output is identified in the western region.Finally,we provide policy implications for the sustainable development of both energy and the economy at the national and regional levels.

Deep Learning Based Energy Consumption Prediction on Internet of Things Environment

The creation of national energy strategy cannot proceed without accurate projections of future electricity consumption;this is because EC is intimately tied to other forms of energy,such as oil and natural gas.For the purpose of determining and bettering overall energy consumption,there is an urgent requirement for accurate monitoring and calculation of EC at the building level using cutting-edge technology such as data analytics and the internet of things(IoT).Soft computing is a subset of AI that tries to design procedures that are more accurate and reliable,and it has proven to be an effective tool for solving a number of issues that are associated with the use of energy.The use of soft computing for energy prediction is an essential part of the solution to these kinds of challenges.This study presents an improved version of the Harris Hawks Optimization model by combining it with the IHHODL-ECP algorithm for use in Internet of Things settings.The IHHODL-ECP model that has been supplied acts as a useful instrument for the prediction of integrated energy consumption.In order for the raw electrical data to be compatible with the subsequent processing in the IHHODL-ECP model,it is necessary to perform a preprocessing step.The technique of prediction uses a combination of three different kinds of deep learning models,namely DNN,GRU,and DBN.In addition to this,the IHHO algorithm is used as a technique for making adjustments to the hyperparameters.The experimental result analysis of the IHHODL-ECP model is carried out under a variety of different aspects,and the comparison inquiry highlighted the advantages of the IHHODL-ECP model over other present approaches.According to the findings of the experiments conducted with an hourly time resolution,the IHHODL-ECP model obtained a MAPE value of 33.85,which was lower than those produced by the LR,LSTM,and CNN-LSTM models,which had MAPE values of 83.22,44.57,and 34.62 respectively.These findings provided evidence of the IHHODL-ECP model’s improved ability to provide accurate forecasts.

Distributed Multi-hop Clustering Approach with Low Energy Consumption in WSN

The purpose of sensing the environment and geographical positions,device monitoring,and information gathering are accomplished using Wireless Sensor Network(WSN),which is a non-dependent device consisting of a distinct collection of Sensor Node(SN).Thus,a clustering based on Energy Efficient(EE),one of the most crucial processes performed in WSN with distinct environments,is utilized.In order to efficiently manage energy allocation during sensing and communication,the present research on managing energy efficiency is performed on the basis of distributed algorithm.Multiples of EE methods were incapable of supporting EE routing with MIN-EC in WSN in spite of the focus of EE methods on energy harvesting and minimum Energy Consumption(EC).The three stages of performance are proposed in this research work.At the outset,during routing and Route Searching Time(RST)with fluctuating node density and PKTs,EC is reduced by the Hybrid Energy-based Multi-User Routing(HEMUR)model proposed in this work.Energy efficiency and an ideal route for various SNs with distinct PKTs in WSN are obtained by this model.By utilizing the Approximation Algorithm(AA),the Bregman Tensor Approximation Clustering(BTAC)is applied to improve the Route Path Selection(RPS)efficiency for Data Packet Transmission(DPT)at the Sink Node(SkN).The enhanced Network Throughput Rate(NTR)and low DPT Delay are provided by BTAC.To MAX the Clustering Efficiency(CE)and minimize the EC,the Energy Effective Distributed Multi-hop Clustering(GISEDC)method based on Generalized Iterative Scaling is implemented.The Multi-User Routing(MUR)is used by the HEMUR model to enhance the EC by 20%during routing.When compared with other advanced techniques,the Average Energy Per Packet(AEPP)is enhanced by 39%with the application of proportional fairness with Boltzmann Distribution(BD).The Gaussian Fast Linear Combinations(GFLC)with AA are applied by BTAC method with an enhanced Communication Overhead(COH)for an increase in performance by 19%and minimize the DPT delay by 23%.When compared with the rest of the advanced techniques,CE is enhanced by 8%and EC by 27%with the application of GISEDC method.

Forecasting Energy Consumption Using a Novel Hybrid Dipper Throated Optimization and Stochastic Fractal Search Algorithm

The accurate prediction of energy consumption has effective role in decision making and risk management for individuals and governments.Meanwhile,the accurate prediction can be realized using the recent advances in machine learning and predictive models.This research proposes a novel approach for energy consumption forecasting based on a new optimization algorithm and a new forecasting model consisting of a set of long short-term memory(LSTM)units.The proposed optimization algorithm is used to optimize the parameters of the LSTM-based model to boost its forecasting accuracy.This optimization algorithm is based on the recently emerged dipper-throated optimization(DTO)and stochastic fractal search(SFS)algo-rithm and is referred to as dynamic DTOSFS.To prove the effectiveness and superiority of the proposed approach,five standard benchmark algorithms,namely,stochastic fractal search(SFS),dipper throated optimization(DTO),whale optimization algorithm(WOA),particle swarm optimization(PSO),and grey wolf optimization(GWO),are used to optimize the parameters of the LSTM-based model,and the results are compared with that of the proposed approach.Experimental results show that the proposed DDTOSFS+LSTM can accurately forecast the energy consumption with root mean square error RMSE of 0.00013,which is the best among the recorded results of the other methods.In addition,statistical experiments are conducted to prove the statistical difference of the proposed model.The results of these tests confirmed the expected outcomes.

A hybrid agent⁃based machine learning method for human⁃centred energy consumption prediction

Occupant behaviour has significant impacts on the performance of machine learning algorithms when predicting building energy consumption.Due to a variety of reasons(e.g.,underperforming building energy management systems or restrictions due to privacy policies),the availability of occupational data has long been an obstacle that hinders the performance of machine learning algorithms in predicting building energy consumption.Therefore,this study proposed an agent⁃based machine learning model whereby agent⁃based modelling was employed to generate simulated occupational data as input features for machine learning algorithms for building energy consumption prediction.Boruta feature selection was also introduced in this study to select all relevant features.The results indicated that the performances of machine learning algorithms in predicting building energy consumption were significantly improved when using simulated occupational data,with even greater improvements after conducting Boruta feature selection.

Comparative Study on Energy Consumption Structure of Ordinary Rural Households and Rural Tourism Households in Zhejiang Province, China

With the rapid development of rural tourism in China, more and more rural households operate a rural tourism business. The purpose of this study is to understand the energy consumption characteristic of ordinary rural households (ORHs) and rural tourism households (RTHs) in the mountainous area and islands area in Zhejiang province. 225 households were surveyed, including 185 ORHs and 40 RTHs, based on a field survey in Quzhou (mountainous area) and Zhoushan (islands area). Results reveal that energy consumption of ORHs is low, but energy comsumption of RTHs is high, about 3 to 5 times higher than that of ORHs. Given the results, the government and RTHs should pay more attention to take measures to reduce energy comsumption. Meanwhile, the factors affecting households’ energy consumption are also analyzed. Energy consumption of ORHs is affected by frequently used area, family income level and permanent population. Then energy consumption of RTHs is mainly related to the total building area, number of air conditioner (AC), number of guestrooms and family income level.

Optimization of Electricity Purchase and Sales Strategies of Electricity Retailers under the Condition of Limited Clean Energy Consumption

In the process of my country’s energy transition,the clean energy of hydropower,wind power and photovoltaic power generation has ushered in great development,but due to the randomness and volatility of its output,it has caused a certain waste of clean energy power generation resources.Regarding the purchase and sale of electricity by electricity retailers under the condition of limited clean energy consumption,this paper establishes a quantitative model of clean energy restricted electricity fromthe perspective of power system supply and demand balance.Then it analyzes the source-charge dual uncertain factors in the electricity retailer purchasing and selling scenarios in the mid-to long-term electricity market and the day-ahead market.Through the multi-scenario analysis method,the uncertain clean energy consumption and the user’s power demand are combined to form the electricity retailer’s electricity purchase and sales scene,and the typical scene is obtained by using the hierarchical clustering algorithm.This paper establishes a electricity retailer’s risk decisionmodel for purchasing and selling electricity in themid-and long-term market and reduce-abandonment market,and takes the maximum profit expectation of the electricity retailer frompurchasing and selling electricity as the objective function.At the same time,in themediumand longterm electricity market and the day-ahead market,the electricity retailer’s purchase cost,electricity sales income,deviation assessment cost and electricity purchase and sale risk are considered.The molecular results show that electricity retailers can obtain considerable profits in the reduce-abandonment market by optimizing their own electricity purchase and sales strategies,on the premise of balancing profits and risks.

Optimization of Chiller Loading Problem Using Improved Golden Jackal Optimization Algorithm Leads to Reduction in Energy Consumption

This paper proposes a modified golden jackal optimization(IGJO)algorithm to solve the OCL(which stands for optimal cooling load)problem to minimize energy consumption.In this algorithm,many tools have been developed,such as numerical visualization,local field method,competitive selectionmethod,and iterative strategy.The IGJO algorithm is used to improve the research capabilities of the algorithm in terms of global tuning and rotation speed.In order to fully utilize the effectiveness of the proposed algorithm,three famous examples of OCL problems in basic ventilation systems were studied and compared with some previously published works.The results show that the IGJO algorithm can find solutions equal to or better than other methods.Underpinning these studies is the need to reduce energy consumption in air conditioning systems,which is a critical business and environmental decision.The Optimal Chiller Load(OCL)problem is well-known in the industry.It is the best method of operation for the refrigeration plant to satisfy the requirement of cooling.In order to solve the OCL problem,an improved Golden Jackal optimization algorithm(IGJO)was proposed.The IGJO algorithm consists of a number of parts to improve the global optimization and rotation speed.These studies are intended to address more effectively the issue of OCL,which results in energy savings in air-conditioning systems.The performance of the proposed IGJO algorithm is evaluated,and the results are compared with the results of three known OCL problems in the ventilation system.The results indicate that the IGJO method has the same or better optimization ability as other methods and can improve the energy efficiency of the system’s cold air.

Energy Consumption Analysis and Characterization of Aerospace Manufacturing Facilities in the United States–A Step towards Sustainable Development

In this study,information on energy usage in the United States(U.S.)aerospace manufacturing sector has been analyzed and then represented as energy intensities(kWh/m2)to establish benchmark data and to compare facilities of varying sizes.First,public sources were identified and the data from these previously published sources were aggregated to determine the energy usage of aerospace manufacturing facilities within the U.S.From this dataset,a sample of 28 buildings were selected and the energy intensity for each building was estimated from the data.Next,as a part of this study the energy data for three additional aerospace manufacturing facilities in the U.S.were collected firsthand.That data was analyzed and the energy intensity(kWh/m2)for each facility was calculated and then compared with the energy intensities of the 28 buildings from the sample.Three different indicators of energy consumption in aerospace manufacturing facilities were used as comparators to assist facility managers with determining potential energy savings and help in the decision-making process.On average,aerospace manufacturing facilities in the United States spent 4 cents for each dollar of sale on energy.The energy intensity(kWh/m2)and the power intensity(W/m2)for each facility were calculated based on the actual facility energy bills.The power intensity for these facilities ranges from 34 to 134 W/m2.The energy intensity ranged from 232 to 949 kWh/m2.We found that the power intensity could be used to estimate energy consumption when the annual operating hours of the facility are considered.and to estimate the energy-related carbon dioxide emissions.

Case Study-Performances of a Masonry House-Energy Consumption and Air-Tightness

Air-tightness and energy consumption was measured in a one-family house built in 2009 and 2010.The air-tightness fulfilled the goals,which was set to 0.3 L/s·m^(2).The energy consumption was measured from the start in May 2010.The figures in this report refer to measurements between May 2010 and October 2013 and are well below the authority demand of 55 kWh/m^(2)·year.

Study on the Principle Model and Simplification of Subway Station Itemized Energy Consumption

Owing to the constant modernization and urbanization of China,most cities have subways,and the total power consumption of subway stations has been rising,which contradicts with China’s green goals.In this regard,energy consumption indicators for major energy use projects in subway stations should be established,comprehensive evaluation and detailed research on the current situation of subway operation should be conducted,and specific energy-saving measures should be taken from a diversified perspective.It is crucial to systematically sort out the principle of sub-item energy consumption in subway stations,and practice and explore the specific simplification measures of the principle model of sub-item energy consumption,so as to lay a solid foundation for achieving the goal of reducing energy consumption of subway stations.

Energy Consumption Analysis and Optimization of Electric Submersible Pump System

Electric submersible pumps account for a considerable proportion in the development of the Bohai Oilfield. Improving the system efficiency of the electric submersible pump wells, ensuring that the units operate in the high-efficiency zone, is essential. Analysis shows that the efficiency of the electric submersible pump system depends on the wear and tear of each component of the submersible pump equipment, the setting of operational parameters, and more importantly, the production status and daily management level of the oil well. Therefore, improving the structural performance of the submersible pump product, optimizing the parameters setting of the oil well, strengthening daily management, establishing a scientific management system, and improving the production management process and system can effectively improve the production efficiency and economic benefits of the oil well, and further achieve the goal of energy saving and emission reduction. In addition, it is necessary to actively promote the concept and technology of energy saving and emission reduction, encourage oilfield enterprises to explore effective measures to reduce the energy consumption of the electric submersible pump system by strengthening the scientific management system, and achieve a green, low-carbon, and high-quality development of oilfield production to achieve the unity of economic benefits, social benefits, and environmental benefits. This article applies the above measures in the P oilfield to achieve energy optimization of submersible electric pump systems, reducing the daily power consumption of single well submersible electric pump systems by 371 kWh per day, increasing the submersible electric pump's lifespan by 200 days, generating considerable project benefits.