Variations in Wave Energy and Amplitudes along the Energy Dispersion Paths of Nonstationary Barotropic Rossby Waves

The variations in the wave energy and the amplitude along the energy dispersion paths of the barotropic Rossby waves in zonally symmetric basic flow are studied by solving the wave energy equation,which expresses that the wave energy variability is determined by the divergence of the group velocity and the energy budget from the basic flow.The results suggest that both the wave energy and the amplitude of a leading wave increase significantly in the propagating region that is located south of the jet axis and enclosed by a southern critical line and a northern turning latitude.The leading wave gains the barotropic energy from the basic flow by eddy activities.The amplitude continuously climbs up a peak at the turning latitude due to increasing wave energy and enlarging horizontal scale(shrinking total wavenumber).Both the wave energy and the amplitude eventually decrease when the trailing wave continuously approaches southward to the critical line.The trailing wave decays and its energy is continuously absorbed by the basic flow.Furthermore,both the wave energy and the amplitude oscillate with a limited range in the propagating region that is located near the jet axis and enclosed by two turning latitudes.Both the leading and trailing waves neither develop nor decay significantly.The jet works as a waveguide to allow the waves to propagate a long distance.

Mechanism research on arsenic removal from arsenopyrite ore during a sintering process

The mechanism of arsenic removal during a sintering process was investigated through experiments with a sintering pot and arsenic-bearing iron ore containing arsenopyrite; the corresponding chemical properties of the sinter were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray diffraction (XRD), and scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS). The experimental results revealed that the reaction of arsenic removal is mainly related to the oxygen atmosphere and temperature. During the sintering process, arsenic could be removed in the ignition layer, the sinter layer, and the combustion zone. A portion of FeAsS reacted with excess oxygen to generate FeAsO4, and the rest of the FeAsS reacted with oxygen to generate As2O3(g) and SO2(g). A portion of As2O3(g) mixed with Al2O3or CaO, which resulted in the formation of arsenates such as AlAsO4and Ca3(AsO4)2, leading to arsenic residues in sintering products. The FeAsS component in the blending ore was difficult to decompose in the preliminary heating zone, the dry zone, or the bottom layer because of the relatively low temperatures; however, As2O3(g) that originated from the high-temperature zone could react with metal oxides, resulting in the formation of arsenate residues. © 2017, University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg.

Environmental boundary and formation mechanism of different types of H2S corrosion products on pipeline steel

To establish an adequate thermodynamic model for the mechanism of formation of hydrogen sulfide (H2S) corrosion products, theoretical and experimental studies were combined in this work. The corrosion products of API X60 pipeline steel formed under different H2S corrosion conditions were analyzed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. A thermodynamic model was developed to clarify the environmental boundaries for the formation and transformation of different products. Presumably, a dividing line with a negative slope existed between mackinawite and pyrrhotite. Using experimental data presented in this study combined with previously published results, we validated the model to predict the formation of mackinawite and pyrrhotite on the basis of the laws of thermodynamics. The established relationship is expected to support the investigation of the H2S corrosion mechanism in the oil and gas industry. © 2017, University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg.

Highly efficient and stable electrooxidation of methanol and ethanol on 3D Pt catalyst by thermal decomposition of In2O3 nanoshells

In this paper In2O3nanoshells have been synthesized via a facile hydrothermal approach. The nanoshells can be completely cracked into pony-size nanocubes by annealing, which are then used as a support of Pt catalyst for methanol and ethanol electrocatalytic oxidation. The prepared In2O3and supported Pt catalysts (Pt/In2O3) were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), field effect scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). Cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry and electrochemical impedance spectroscopy (EIS) were carried out, indicating the excellent catalytic performance for alcohol electrooxidation can be achieved on Pt/In2O3nanocatalysts due to the multiple active sites, high conductivity and a mass of microchannels and micropores for reactant diffusions arising from 3D frame structures compared with that on the Pt/C catalysts. © 2016 Science Press

Integration of GaN thin films with silicon substrates by fusion bonding and laser lift-off

GaN thin films grown on sapphire substrates by metalorganic chemical vapor deposition （MOCVD） are successfully bonded and transferred onto Si receptor substrates using fusion bonding and laser lift-off （LLO） technique. GaN/Al2O3 structures are joined to Si substrates by pressure bonding Ti/Au coated GaN surface onto Ti/Au coated Si receptor substrates at the temperature of 400℃. KrF excimer laser with 400-mJ/cm^2 energy density, 248-nm wavelength, and 30-ns pulse width is used to irradiate the wafer through the transparent sapphire substrates and separate GaN films from sapphire. Cross-section scanning electron microscopy （SEM） combined with energy dispersive X-ray spectrometer （EDS） measurements show that Au/Si solid solution is formed during bonding process. Atomic force microscopy （AFM） and photoluminescence （PL） measurements show that the qualities of GaN films on Si substrates degrade little after substrates transfer.

FePO4-coated Li[Li0.2Ni0.13Co0.13Mn0.54]O2 with improved cycling performance as cathode material for Li-ion batteries

Li[Li0.2Ni0.13Coo.13Mn0.54]O2 cathode materials were synthesized by carbonate-based co-precipitation method, and then, its surface was coated by thin layers of FePO4. The prepared samples were characterized by X-ray diffraction （XRD）, field emission scanning electron micro- scope （FESEM）, energy-dispersive spectroscopy （EDS）, and transmission electron microscopy （TEM）. The XRD and TEM results suggest that both the pristine and the coated materials have a hexagonal layered structure, and the FePO4 coating layer does not make any major change in the crystal structure. The FePO4-coated sample exhibits both improved initial discharge capacity and columbic efficiency compared to the pristine one. More significantly, the FePO4 coating layer has a much positive influence on the cycling perfor- mance. The FePO4-coated sample exhibits capacity reten- tion of 82 % after 100 cycles at 0.5℃ between 2.0 and 4.8 V, while only 28 % for the pristine one at the same charge-discharge condition. The electrochemical impe- dance spectroscopy （EIS） results indicate that this improved cycling performance could be ascribed to the presence of FePO4 on the surface of Li[Li0.2Ni0.13Co0.13Mno.54102 par- ticle, which helps to protect the cathode from chemical attacks by HF and thus suppresses the large increase in charge transfer resistance.

Investigation on LaF_3/porous silicon system for photonic application

We present the investigation on LaF3/porous silicon （PS） system that has properties of both the materials to be applied in photonics. Epilayers of LaF3 are grown on PS under different anodization conditions using electron-beam evaporation （EBE）. The characteristics of the LaF3/PS system are analyzed by X-ray diffraction （XRD）, scanning electron microscope （SEM）, energy dispersive X-ray spectroscopy （EDX）, and photoluminescence （PL）. XRD confirms the polycrystalline nature of the LaFz film. Nearly stoichiometric growth of LaF3 on PS is established by EDX. Such a thin LaF3 layer grown on PS leads to a good enhancement of PL yield of PS. But with the increasing thickness of LaF3 layer, PL intensity of PS is found to decrease along with a small blue-shift.

Study on the laser treatment of electroless Ni-P-SiC composite coatings

Effect of the laser treatment on electroless Ni-P-SiC composite coatings was investigated. The microscopic structure, surface morphology, ingredient, and performance of the Ni-P-SiC composite coatings were synthetically analyzed by the use of X-ray diffraction apparatus, scanning electron microscope, energy distribution spectrometer, micro-hardness tester, wear tester and so on. It was found that the composite coatings did make crystalloblastic transformation after laser heating. Structural analysis confirmed that some new types of phase Ni2Si or Ni3Si compound would emerge in the Ni-P-SiC coatings after laser treatment. The micro-hardness measurement results showed that when the laser power was 450 W with scanning speed of 0.5 m/min, the hardness of the coating was superior to the coating obtained by the conventional furnace heating, and wear resistance of the composite coating after laser treating could also improve.