The transition to sustainable energy systems is one of the defining challenges of our time, necessitating innovations in how we generate, distribute, and manage electrical power. Micro-grids, as localized energy hubs,...The transition to sustainable energy systems is one of the defining challenges of our time, necessitating innovations in how we generate, distribute, and manage electrical power. Micro-grids, as localized energy hubs, have emerged as a promising solution to integrate renewable energy sources, ensure energy security, and improve system resilience. The Autonomous multi-factor Energy Flow Controller (AmEFC) introduced in this paper addresses this need by offering a scalable, adaptable, and resilient framework for energy management within an on-grid micro-grid context. The urgency for such a system is predicated on the increasing volatility and unpredictability in energy landscapes, including fluctuating renewable outputs and changing load demands. To tackle these challenges, the AmEFC prototype incorporates a novel hierarchical control structure that leverages Renewable Energy Sources (RES), such as photovoltaic systems, wind turbines, and hydro pumps, alongside a sophisticated Battery Management System (BMS). Its prime objective is to maintain an uninterrupted power supply to critical loads, efficiently balance energy surplus through hydraulic storage, and ensure robust interaction with the main grid. A comprehensive Simulink model is developed to validate the functionality of the AmEFC, simulating real-world conditions and dynamic interactions among the components. The model assesses the system’s reliability in consistently powering critical loads and its efficacy in managing surplus energy. The inclusion of advanced predictive algorithms enables the AmEFC to anticipate energy production and consumption trends, integrating weather forecasting and inter-controller communication to optimize energy flow within and across micro-grids. This study’s significance lies in its potential to facilitate the seamless incorporation of RES into existing power systems, thus propelling the energy sector towards a more sustainable, autonomous, and resilient future. The results underscore the potential of such a system to revolutionize energy management practices and highlight the importance of smart controller systems in the era of smart grids.展开更多
The phenomena of super energy flows are studied theoretically and numerically in a parallel-plate waveguide which is filled with two layered equally-thick different media, i.e. air and specific left-handed materials ...The phenomena of super energy flows are studied theoretically and numerically in a parallel-plate waveguide which is filled with two layered equally-thick different media, i.e. air and specific left-handed materials (LHM) with εr1 = -1/(1 +δ) +iγ and μr1 = -(1 + δ) + iγ. In this special waveguide, two-directional super-energy flows are excited by a three-dimensional horizontal electric dipole at the same time, which has transmission patterns different from those of two-dimensional source and three-dimensional vertical electric dipole. We also show that the retardation and loss in LHM are sensitive to the amplitude of super power densities, and the dimensions of waveguide determine the propagating modes, which makes super energy flows more practical.展开更多
The marine ecosystem of the Jiaozhou Bay has degraded significantly in fisheries productivity and its ecological roles as spawning and nursery ground for many species of commercial importance has been declining in rec...The marine ecosystem of the Jiaozhou Bay has degraded significantly in fisheries productivity and its ecological roles as spawning and nursery ground for many species of commercial importance has been declining in recent years. A mass-balanced trophic model was developed using Ecopath with Ecosim to evaluate the trophic structure of the Jiaozhou Bay for improving ecosystem management. The model were parameterized based on the fisheries survey data in the Jiaozhou Bay in 2011, including 23 species groups and one detritus group according to their ecological roles. The trophic levels of these ecological groups ranged from 1(primary producers and detritus) to4.3(large demersal fishes). The estimated total system throughput was 12 917.10 t/(km^2·a), with 74.59% and25.41% contribution of the total energy flows from phytoplankton and detritus, respectively. Network analyses showed that the overall transfer efficiency of the ecosystem was 14.4%, and the mean transfer efficiency was 14.5%for grazing food chain and 13.9% for detritus food chain. The system omnivory index(SOI), Finn's cycled index(FCI) and connectance index(CI) were relatively low in this area while the total primary production/total respiration(TPP/TR) was high, indicating an immature and unstable status of the Jiaozhou Bay ecosystem. Mixed trophic impact analysis revealed that the cultured shellfish had substantial negative impacts on most functional groups. This study contributed to ecosystem-level evaluation and management planning of the Jiaozhou Bay ecosystem.展开更多
To enhance the fuel economy of a vehicle powered by a gasoline engine under road conditions,an energy flow test of a vehicle was performed experimentally under the New European Driving Cycle of cold start.The energy d...To enhance the fuel economy of a vehicle powered by a gasoline engine under road conditions,an energy flow test of a vehicle was performed experimentally under the New European Driving Cycle of cold start.The energy distributions and related influencing factors were analyzed using the test data.Results show that the effective power and thermal efficiency are mainly affected by the engine load except in the early stage of the New European Driving Cycle.Because of the retarded CA50 and longer CA10-90,the effective thermal efficiency is lower in the early phase of driving conditions.Initially,the heat transfer loss mainly comprises the loss of the heating,ventilation,and air conditioning system.The radiator then plays the major role,with its percentage affected by the engine load and decreasing under the extra-urban driving cycle.The exhaust gas loss is decided by the temperature and flow rate of the exhaust gas,while its percentage is mainly affected by the temperature of the exhaust gas.In the early phase of driving conditions,the retarded spark advance angle leads to a higher temperature of the exhaust gas and a greater exhaust gas loss.The pumping loss and its percentage are mainly determined by the engine speed under the urban driving cycle,and both decrease under the extra-urban driving cycle except at maximum vehicle speed.展开更多
In an integrated energy system,source-load multiple uncertainties and correlations lead to an over-limit risk in operating state,including voltage,temperature,and pressure over-limit.Therefore,efficient probabilistic ...In an integrated energy system,source-load multiple uncertainties and correlations lead to an over-limit risk in operating state,including voltage,temperature,and pressure over-limit.Therefore,efficient probabilistic energy flow calculation methods and risk assessment theories applicable to integrated energy systems are crucial.This study proposed a probabilistic energy flow calculation method based on polynomial chaos expansion for an electric-heat-gas integrated energy system.The method accurately and efficiently calculated the over-limit probability of the system state variables,considering the coupling conditions of electricity,heat,and gas,as well as uncertainties and correlations in renewable energy unit outputs and multiple types of loads.To further evaluate and quantify the impact of uncertainty factors on the over-limit risk,a global sensitivity analysis method for the integrated energy system based on the analysis of covariance theory is proposed.This method considered the source-load correlation and aimed to identify the key uncertainty factors that influence stable operation.Simulation results demonstrated that the proposed method achieved accuracy to that of the Monte Carlo method while significantly reducing calculation time.It effectively quantified the over-limit risk under the presence of multiple source-load uncertainties.展开更多
Ethylene cracking process is the core production process in ethylene industry,and is paid more attention to reduce high energy consumption.Because of the interdependent relationships between multi-flow allocation and ...Ethylene cracking process is the core production process in ethylene industry,and is paid more attention to reduce high energy consumption.Because of the interdependent relationships between multi-flow allocation and multi-parameter setting in cracking process,it is difficult to find the overall energy efficiency scheduling for the purpose of saving energy.The traditional scheduling solutions with optimal economic benefit are not applicable for energy efficiency scheduling issue due to the neglecting of recycle and lost energy,as well as critical operation parameters as coil outlet pressure(COP)and dilution ratio.In addition,the scheduling solutions mostly regard each cracking furnace as an elementary unit,regardless of the coordinated operation of internal dual radiation chambers(DRC).Therefore,to improve energy utilization and production operation,a novel energy efficiency scheduling solution for ethylene cracking process is proposed in this paper.Specifically,steam heat recycle and exhaust heat loss are considered in cracking process based on 6 types of extreme learning machine(ELM)based cracking models incorporating DRC operation and three operation parameters as coil outlet temperature(COT),COP,and dilution ratio according to semi-mechanism analysis.Then to provide long-term decision-making basis for energy efficiency scheduling,overall energy efficiency indexes,including overall output per unit net energy input(OONE),output-input ratio per unit net energy input(ORNE),exhaust gas heat loss ratio(EGHL),are designed based on input-output analysis in terms of material and energy flows.Finally,a multiobjective evolutionary algorithm based on decomposition(MOEA/D)is employed to solve the formulated multi-objective mixed-integer nonlinear programming(MOMINLP)model.The validities of the proposed scheduling solution are illustrated through a case study.The scheduling results demonstrate that an optimal balance between multi-flow allocation,multi-parameter setting,and DRC coordinated operation is reached,which achieves 3.37%and 2.63%decreases in net energy input for same product output and conversion ratio,as well as the 1.56%decrease in energy loss ratio.展开更多
Chaotic phenomena are increasingly being observed in all fields of nature,where investigations reveal that a natural phe nomenon exhibits nonlinearities and attempts to reveal their deep underlying mechanisms.Chaos is...Chaotic phenomena are increasingly being observed in all fields of nature,where investigations reveal that a natural phe nomenon exhibits nonlinearities and attempts to reveal their deep underlying mechanisms.Chaos is normally understood as“a state of disorder”,for which there is as yet no universally accepted mathematical definition.A commonly used concept states that,for a dynamical system to be classified as chaotic,it must have the following properties:be sensitive to initial conditions,show topological transitivity,have densely periodical orbits etc.Revealing the rules that govern chaotic motion is thus an important unsolved task for exploring nature.W e present herein a generalised energy conservation law governing chaotic phenomena.Based on two scalar variables,viz.generalised potential and kinetic energies defined in the phase space describing nonlinear dynamical systems,we find that chaotic motion is periodic motion with infinite time period whose time-averaged generalised potential and kinetic energies are conserved over its time period.This implies that,as the averaging time is increased,the time-averaged generalised potential and kinetic energies tend to constants while the time-averaged energy flows,i.e.,their rates of change with time,tend to zero.Numerical simulations on reported chaotic motions,such as the forced van der Pol system,forced Duffing system,forced smooth and discontinuous oscillator,Lorenz’s system,and Rossler's system,show the above conclusions to be correct according to the results presented herein.This discovery may indicate that chaotic phenomena in nature could be controlled because,even though their instantaneous states are disordered,their long-time averages can be predicted.展开更多
Soft abrasive flow(SAF) finishing can process the irregular geometric surfaces, but with the matter of low processing efficiency. To address the issue, an improved SAF finishing method based on turbulent kinetic ene...Soft abrasive flow(SAF) finishing can process the irregular geometric surfaces, but with the matter of low processing efficiency. To address the issue, an improved SAF finishing method based on turbulent kinetic energy enhancing is proposed. A constrained flow passage with serration cross-section is constructed to increase the turbulence intensity. Taking the constrained flow passage as the objective, a two-phase fluid dynamic model is set up by using particle trajectory model and standard k-ε turbulence model, and the flow field characteristics of the flow passage are acquired. The numerical results show that the serration flow passage can enhance the turbulence intensity, uniform the particles distribution, and increase the particle concentration near the bottom wall. The observation results by particle image velocimetry(PIV) show that the internal vortex structures are formed in flow passage, and the abrasive flow takes on turbulence concentrating phenomenon in near-wall region. The finishing experiments prove that the proposed method can obtain better surface uniformity, and the processing efficiency can be improved more 35%. This research provides an abrasive flow modeling method to reveal the particle motion regulars, and canoffer references to the technical optimization of fluid-based precision processing.展开更多
The main characteristics of energy environment, energy products, primary productivity and basic process ofenergy flow for three-hardwood forest(Juglans mandshurica, Fraxinus mandshurica, and Phellodendron amurense) we...The main characteristics of energy environment, energy products, primary productivity and basic process ofenergy flow for three-hardwood forest(Juglans mandshurica, Fraxinus mandshurica, and Phellodendron amurense) werestudied. The research was mainly hased on the thcory and method of community energetics, dealing with fixed position,quantitative test and expcrimental analysis. The time-space dynamics of sun-radiation in three-hardwood forest were measured and the energy compartment model was set up. his rescarch work provided a scientitic basis for the exploitation, utilization and management of three-hardtwood forest.展开更多
Energy resilience is about ensuring a business and end-use consumers have a reliable,regular supply of energy and contingency measures in place in the event of a power failure,generating a source of power such as elec...Energy resilience is about ensuring a business and end-use consumers have a reliable,regular supply of energy and contingency measures in place in the event of a power failure,generating a source of power such as electricity for daily needs from an uninterrupted source of energy no matter either renewable or nonrenewable.Causes of resilience issues include power surges,weather,natural disasters,or man-made accidents,and even equipment failure.The human operational error can also be an issue for grid-power supply to go down and should be factored into resilience planning.As the energy landscape undergoes a radical transformation,from a world of large,centralized coal plants to a decentralized energy world made up of small-scale gas-fired production and renewables,the stability of electricity supply will begin to affect energy pricing.Businesses must plan for this change.The challenges that the growth of renewables brings to the grid in terms of intermittency mean that transmission and distribution costs consume an increasing proportion of bills.With progress in the technology of AI(Artificial Intelligence)integration of such progressive technology in recent decades,we are improving our resiliency of energy flow,so we prevent any unexpected interruption of this flow.Ensuring your business is energy resilient helps insulate against price increases or fluctuations in supply,becoming critical to maintaining operations and reducing commercial risk.In the form short TM(Technical Memorandum),this paper covers this issue.展开更多
A study is made of the distribution of the diagnostic quantity vector E and the teleconnection structure of 30-50 (quasi-40) day oscillation, together with the dependence on the conversion of barotropic unstable energ...A study is made of the distribution of the diagnostic quantity vector E and the teleconnection structure of 30-50 (quasi-40) day oscillation, together with the dependence on the conversion of barotropic unstable energy of mean flow in terms of ECWMF daily 500 hPa grid data in winter, indicating that the energy transportation is closely associated with the westerly jet position, with zonal (meridional) propagation in the strong (weak) wind region, that considerable conversion of barotropic energy occurs at the jet exit region where low-frequency oscillation gains energy from the mean flow, leading to maximum kinetic energy for the oscillation observed there, which is marked by evident barotropy in striking contrast to the baroclinicity at low latitudes and that the teleconnection core is related to the center of action in the atmosphere and bound up with the pattern of the west wind.展开更多
The local features of transient kinetic energy and available potential energy were investigated using ECMWF (European Centre for Medium-Range Weather Forecasts) Interim Reanalysis data for the stratospheric sudden w...The local features of transient kinetic energy and available potential energy were investigated using ECMWF (European Centre for Medium-Range Weather Forecasts) Interim Reanalysis data for the stratospheric sudden warming (SSW) event of January 2009. The Western Europe high plays important roles in the propagation of the energy from North America to Eurasian. When the Western Europe high appeared and shifted eastward, energy conversions increased and energy propagated from North America to Eurasian as a form of interaction energy flow. The baroclinic conversion between transient-eddy kinetic energy (Ke) and transient-eddy available potential energy (Ae) and the horizontal advection of geopotential height were approximately one order of magnitude less than Ke and Ae generation terms. So, these terms were less important to this SSW event.展开更多
Accurate electric energy(EE)measurements and billing estimations in a power system necessitate the development of an energy flow distribution model.This paper summarizes the results of investigations on a new problem ...Accurate electric energy(EE)measurements and billing estimations in a power system necessitate the development of an energy flow distribution model.This paper summarizes the results of investigations on a new problem related to the determination of EE flow in a power system over time intervals ranging from minutes to years.The problem is referred to as the energy flow problem(EFP).Generally,the grid state and topology may fluctuate over time.An attempt to use instantaneous(not integral)power values obtained from telemetry to solve classical electrical engineering equations leads to significant modeling errors,particularly with topology changes.A promoted EFP model may be suitable in the presence of such topological and state changes.Herein,EE flows are determined using state estimation approaches based on direct EE measurement data in Watt-hours(Volt-ampere reactive-hours)provided by electricity meters.The EFP solution is essential for a broad set of applications,including meter data validation,zero unbalance EE billing,and nontechnical EE loss check.展开更多
It is impossible to overstate the importance of energy.Just thinking about where humanity would be without it may be enough to demonstrate this point.Like in the past,energy will play a vital role in shaping future in...It is impossible to overstate the importance of energy.Just thinking about where humanity would be without it may be enough to demonstrate this point.Like in the past,energy will play a vital role in shaping future industries,cities,nations,and the world.That is why we believe that energy is a critical factor in shaping future paradigms in any target entity or world.To have a better understanding of the role that energy plays in the world today and in the future,in this article,we briefly look at the definition of energy and its different forms,and review some data related to energy consumption in the world and the United States.Furthermore,as a source of clean energy,we believe the future of nuclear power technology,despite the challenges it faces,is an important option for this country and the rest of the world to meet future energy needs without emitting CO(carbon monoxide)and CO2(carbon dioxide),or other GHGs(greenhouse gases),and other atmospheric pollutants and it is more efficient among its other comparable sources of renewable energies,such as solar,wind,etc.Globally,renewables made up 29 percent of electricity generation in 2020,much of it from hydro-power(16.8 percent).A record amount of over 256 GW of renewable power capacity was added globally during 2020 and continues to be the focal point for climate and energy solutions.Demand for electricity is direct function of population growth globally and is also driven by the present century’s extraordinary technological developments.展开更多
Developing an integrated and intelligent approach to securing the ITE(information technology environment)is an emergent and evolving concern for every organization and consumer entity during the last few decades.Major...Developing an integrated and intelligent approach to securing the ITE(information technology environment)is an emergent and evolving concern for every organization and consumer entity during the last few decades.Major topics of concern include“SI”(security intelligence),“D-DA”(data-driven analytics),“PE”(proven expertise),and“R-TD”(real-time defense)capabilities.“DRBTs”(dynamic response behavior types)include“incident response”,“endpoint management”,“threat intelligence”,“network security”,and“fraud protection”.The consumer demand for electricity as essential public access and service is indexed to population growth estimates.Consumer-driven economies continue to add electrical consumption to their grids even though improvements in lower-power consumption and higher design efficiencies are present in new electric-powered products.Dependence on the production of electrical energy has no peer replacement technology and creates a societal vulnerability to targeted public electrical grid interruptions.When access to,or production of,electrical power is interrupted,the result is a“Mass Effect”every consumer feels with equal distribution.Electric grid security falls directly into the levels of authorized,and unauthorized,access via the“IoT”(Internet of Things)concepts,and the“IoM2M”(Internet of Machine-to-Machine)integration.Electrical grid operations that include production and network management augment each other in order to support the demand for electricity every day either in peak or off-peak,thus cybersecurity plays a big role in the protection of such assets at our disposal.With help from AI(artificial intelligence)integrated into the IoT a resilient system can be built to protect the electric grid system nationwide and will be able to detect and preempt Smart Malware attacks.展开更多
Within the isospin-dependent quantum molecular dynamics model, we investigate the nuclear collective flows produced in semi-central 197 Au+197 Au collisions at intermediate energies. The neutron proton differential f...Within the isospin-dependent quantum molecular dynamics model, we investigate the nuclear collective flows produced in semi-central 197 Au+197 Au collisions at intermediate energies. The neutron proton differential flows and difference of neutron proton collective flows are sensitive to the momentum-dependent symmetry potential. This sensitivity is less affected by both the isoscalar part of nuclear equation of state and in-medium nucleon- nucleon cross sections. Moreover, this sensitivity becomes pronounced with increasing the rapidity cut.展开更多
A mass-balanced model was constructed to determine the flow-energy in a community of fishes and invertebrates in the Beibu Gulf, northern South China Sea using Ecopath and Ecosim software. Input parameters were taken ...A mass-balanced model was constructed to determine the flow-energy in a community of fishes and invertebrates in the Beibu Gulf, northern South China Sea using Ecopath and Ecosim software. Input parameters were taken from the literature, except for the biomass of fish groups which was obtained from trawl surveys during October 1997 to May 1999 in the study area. The model consisted of 16 functional groups (boxes), including one marine mammal and seabirds, each representing organisms with a similar role in the food web, and only covered the main trophic flow in the Beibu Gulf ecosystem. The results showed that the food web of Beibu Gulf was dominated by the detrital path and benthic invertebrates played a significant role in transferring energy from the detritus to higher trophic levels; phytoplankton was a primary producer and most utilized as a food source. Fractional trophic levels ranged from 1.0 to 4.08 with marine mammals occupying the highest trophic level. Using network analysis, the system network was mapped into a linear food chain and six discrete trophic levels were found with a mean transfer efficiency of 16.7% from the detritus, 16.2% from the primary producer within the ecosystem. The biomass density of the commercially utilized species estimated by the model is 8.46 t/km^2, only O. 48% of the net primary production.展开更多
Based on the 2-D flow and sediment numerical model of the Yangtze Estuary and the Hangzhou Bay, the characteristics of water and sediment exchange in their joint waters is studied through quantitative calculation and ...Based on the 2-D flow and sediment numerical model of the Yangtze Estuary and the Hangzhou Bay, the characteristics of water and sediment exchange in their joint waters is studied through quantitative calculation and analysis of the characteristics of water flow and sediment transportation. The results show that there is periodical water and sediment exchange in this joint waters, that the net water exchange appears mainly between 0 - 6 m depth (theoretical datum plane, the same below) offshore and the maximum is near the depth of 2 m, and that the net sediment exchange mainly appears between 0 - 5 m depth and the maximum is near the depth of 3 m, indicating that the range of water flow passage is different from that of sediment transport from the Yangtze Estuary to the Hangzhou Bay. Combined with the results of numerical simulation, this paper also analyzes the hydrodynamical mechanism influencing water and sediment exchange between the Yangtze Estuary and the Hangzhou Bay, including tidal fluctuation, tidal current kinetic energy, tide-induced residual current and the trace of water particles. Finally, the sediment transportation passage on the Nanhui tidal fiat is discussed, and the results show that sediment is transported into the Hangzhou Bay from the south side of Shipilei, while sediment is brought back to the South Channel of the Yangtze Estuary from the north side.展开更多
Samples of Mg-8.2Gd-3.8Y-1.1Zn-0.4Zr alloy with and without an intragranular lamellae-shaped long period stacking ordered(LPSO)phase were prepared through heat treatment and a series of hot compression tests on these ...Samples of Mg-8.2Gd-3.8Y-1.1Zn-0.4Zr alloy with and without an intragranular lamellae-shaped long period stacking ordered(LPSO)phase were prepared through heat treatment and a series of hot compression tests on these materials were conducted to examine and evaluate the influence of LPSO on the hot compressive deformation behavior and deformation mechanisms at a given alloy composition.The values of activation energy for plastic flow(Qc)of the solution treated(without LPSO phase)and annealed alloys(with intragranular LPSO phase)were larger than that for pure Mg,indicating that the presence of a high amount of rare earth(RE)elements and LPSO in the Mg matrix significantly increases Qc.The Qcvalue of the annealed alloy was larger than that of the solution treated alloy at all the strain levels(223.3 vs.195.5 k J/mol in average)and the largest difference in Qcbetween the two alloys was recorded at the smallest strain of 0.1 where precipitation of LPSO during deformation was limited in the solution treated alloy.These observations imply that the formation of LPSO phase out of the RE-rich solid solution matrix during deformation increases Qc,but the increment is not so large.Analysis of the hot compressive data of the alloys with LPSO phase and the alloys with RE-rich solid solution matrix in literatures indicates the similarity of the effect of the LPSO and RE-rich solid solution matrix phases on Qcand high-temperature strength.展开更多
The theological behavior of poly(vinylidene fluoride)(PVDF)samples of different molecular weights was investigated by means of high pressure capillary rheometer and rotational rheometer.Information on the rheological ...The theological behavior of poly(vinylidene fluoride)(PVDF)samples of different molecular weights was investigated by means of high pressure capillary rheometer and rotational rheometer.Information on the rheological properties of such materials above melt temperatures is of interest as this can lead to an improved understanding of polymer behavior in processing and fabrication technologies.Shift factors derived from time-temperature superposition showed good fit to the Arrhenius equation with a flow activa...展开更多
文摘The transition to sustainable energy systems is one of the defining challenges of our time, necessitating innovations in how we generate, distribute, and manage electrical power. Micro-grids, as localized energy hubs, have emerged as a promising solution to integrate renewable energy sources, ensure energy security, and improve system resilience. The Autonomous multi-factor Energy Flow Controller (AmEFC) introduced in this paper addresses this need by offering a scalable, adaptable, and resilient framework for energy management within an on-grid micro-grid context. The urgency for such a system is predicated on the increasing volatility and unpredictability in energy landscapes, including fluctuating renewable outputs and changing load demands. To tackle these challenges, the AmEFC prototype incorporates a novel hierarchical control structure that leverages Renewable Energy Sources (RES), such as photovoltaic systems, wind turbines, and hydro pumps, alongside a sophisticated Battery Management System (BMS). Its prime objective is to maintain an uninterrupted power supply to critical loads, efficiently balance energy surplus through hydraulic storage, and ensure robust interaction with the main grid. A comprehensive Simulink model is developed to validate the functionality of the AmEFC, simulating real-world conditions and dynamic interactions among the components. The model assesses the system’s reliability in consistently powering critical loads and its efficacy in managing surplus energy. The inclusion of advanced predictive algorithms enables the AmEFC to anticipate energy production and consumption trends, integrating weather forecasting and inter-controller communication to optimize energy flow within and across micro-grids. This study’s significance lies in its potential to facilitate the seamless incorporation of RES into existing power systems, thus propelling the energy sector towards a more sustainable, autonomous, and resilient future. The results underscore the potential of such a system to revolutionize energy management practices and highlight the importance of smart controller systems in the era of smart grids.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 60671015, 60225001 and 60621002)The State Key Development Program for Basic Research of China (Grant No 2004CB719802)the Doctorate Found of State Education Commission of China (Grant No 20040286010)
文摘The phenomena of super energy flows are studied theoretically and numerically in a parallel-plate waveguide which is filled with two layered equally-thick different media, i.e. air and specific left-handed materials (LHM) with εr1 = -1/(1 +δ) +iγ and μr1 = -(1 + δ) + iγ. In this special waveguide, two-directional super-energy flows are excited by a three-dimensional horizontal electric dipole at the same time, which has transmission patterns different from those of two-dimensional source and three-dimensional vertical electric dipole. We also show that the retardation and loss in LHM are sensitive to the amplitude of super power densities, and the dimensions of waveguide determine the propagating modes, which makes super energy flows more practical.
基金The Public Science and Technology Research Funds Projects of Ministry of Agriculture under contract No.201303050-02the Scientific and Technological Innovation Project for the Qingdao National Laboratory for Marine Science and Technology under contract No.2015ASKJ02+2 种基金the Fundamental Research Funds for the Central Universities under contract No.201262004the National Natural Science Foundation of China under contract No.41006083the Shandong Provincial Natural Science Foundation,China under contract No.ZR2010DQ026
文摘The marine ecosystem of the Jiaozhou Bay has degraded significantly in fisheries productivity and its ecological roles as spawning and nursery ground for many species of commercial importance has been declining in recent years. A mass-balanced trophic model was developed using Ecopath with Ecosim to evaluate the trophic structure of the Jiaozhou Bay for improving ecosystem management. The model were parameterized based on the fisheries survey data in the Jiaozhou Bay in 2011, including 23 species groups and one detritus group according to their ecological roles. The trophic levels of these ecological groups ranged from 1(primary producers and detritus) to4.3(large demersal fishes). The estimated total system throughput was 12 917.10 t/(km^2·a), with 74.59% and25.41% contribution of the total energy flows from phytoplankton and detritus, respectively. Network analyses showed that the overall transfer efficiency of the ecosystem was 14.4%, and the mean transfer efficiency was 14.5%for grazing food chain and 13.9% for detritus food chain. The system omnivory index(SOI), Finn's cycled index(FCI) and connectance index(CI) were relatively low in this area while the total primary production/total respiration(TPP/TR) was high, indicating an immature and unstable status of the Jiaozhou Bay ecosystem. Mixed trophic impact analysis revealed that the cultured shellfish had substantial negative impacts on most functional groups. This study contributed to ecosystem-level evaluation and management planning of the Jiaozhou Bay ecosystem.
基金This research work is jointly sponsored by the National Natural Science Foundation of China(No.51776061)Young Elite Scientists Sponsorship Program of the China Association for Science and Technology(No.2017QNRC001)Fundamental Research Funds for the Central Universities.
文摘To enhance the fuel economy of a vehicle powered by a gasoline engine under road conditions,an energy flow test of a vehicle was performed experimentally under the New European Driving Cycle of cold start.The energy distributions and related influencing factors were analyzed using the test data.Results show that the effective power and thermal efficiency are mainly affected by the engine load except in the early stage of the New European Driving Cycle.Because of the retarded CA50 and longer CA10-90,the effective thermal efficiency is lower in the early phase of driving conditions.Initially,the heat transfer loss mainly comprises the loss of the heating,ventilation,and air conditioning system.The radiator then plays the major role,with its percentage affected by the engine load and decreasing under the extra-urban driving cycle.The exhaust gas loss is decided by the temperature and flow rate of the exhaust gas,while its percentage is mainly affected by the temperature of the exhaust gas.In the early phase of driving conditions,the retarded spark advance angle leads to a higher temperature of the exhaust gas and a greater exhaust gas loss.The pumping loss and its percentage are mainly determined by the engine speed under the urban driving cycle,and both decrease under the extra-urban driving cycle except at maximum vehicle speed.
基金supported in part by the National Natural Science Foundation of China(No.51977005)。
文摘In an integrated energy system,source-load multiple uncertainties and correlations lead to an over-limit risk in operating state,including voltage,temperature,and pressure over-limit.Therefore,efficient probabilistic energy flow calculation methods and risk assessment theories applicable to integrated energy systems are crucial.This study proposed a probabilistic energy flow calculation method based on polynomial chaos expansion for an electric-heat-gas integrated energy system.The method accurately and efficiently calculated the over-limit probability of the system state variables,considering the coupling conditions of electricity,heat,and gas,as well as uncertainties and correlations in renewable energy unit outputs and multiple types of loads.To further evaluate and quantify the impact of uncertainty factors on the over-limit risk,a global sensitivity analysis method for the integrated energy system based on the analysis of covariance theory is proposed.This method considered the source-load correlation and aimed to identify the key uncertainty factors that influence stable operation.Simulation results demonstrated that the proposed method achieved accuracy to that of the Monte Carlo method while significantly reducing calculation time.It effectively quantified the over-limit risk under the presence of multiple source-load uncertainties.
基金supported by the High-tech Research and Development Program of China(2014AA041802)。
文摘Ethylene cracking process is the core production process in ethylene industry,and is paid more attention to reduce high energy consumption.Because of the interdependent relationships between multi-flow allocation and multi-parameter setting in cracking process,it is difficult to find the overall energy efficiency scheduling for the purpose of saving energy.The traditional scheduling solutions with optimal economic benefit are not applicable for energy efficiency scheduling issue due to the neglecting of recycle and lost energy,as well as critical operation parameters as coil outlet pressure(COP)and dilution ratio.In addition,the scheduling solutions mostly regard each cracking furnace as an elementary unit,regardless of the coordinated operation of internal dual radiation chambers(DRC).Therefore,to improve energy utilization and production operation,a novel energy efficiency scheduling solution for ethylene cracking process is proposed in this paper.Specifically,steam heat recycle and exhaust heat loss are considered in cracking process based on 6 types of extreme learning machine(ELM)based cracking models incorporating DRC operation and three operation parameters as coil outlet temperature(COT),COP,and dilution ratio according to semi-mechanism analysis.Then to provide long-term decision-making basis for energy efficiency scheduling,overall energy efficiency indexes,including overall output per unit net energy input(OONE),output-input ratio per unit net energy input(ORNE),exhaust gas heat loss ratio(EGHL),are designed based on input-output analysis in terms of material and energy flows.Finally,a multiobjective evolutionary algorithm based on decomposition(MOEA/D)is employed to solve the formulated multi-objective mixed-integer nonlinear programming(MOMINLP)model.The validities of the proposed scheduling solution are illustrated through a case study.The scheduling results demonstrate that an optimal balance between multi-flow allocation,multi-parameter setting,and DRC coordinated operation is reached,which achieves 3.37%and 2.63%decreases in net energy input for same product output and conversion ratio,as well as the 1.56%decrease in energy loss ratio.
文摘Chaotic phenomena are increasingly being observed in all fields of nature,where investigations reveal that a natural phe nomenon exhibits nonlinearities and attempts to reveal their deep underlying mechanisms.Chaos is normally understood as“a state of disorder”,for which there is as yet no universally accepted mathematical definition.A commonly used concept states that,for a dynamical system to be classified as chaotic,it must have the following properties:be sensitive to initial conditions,show topological transitivity,have densely periodical orbits etc.Revealing the rules that govern chaotic motion is thus an important unsolved task for exploring nature.W e present herein a generalised energy conservation law governing chaotic phenomena.Based on two scalar variables,viz.generalised potential and kinetic energies defined in the phase space describing nonlinear dynamical systems,we find that chaotic motion is periodic motion with infinite time period whose time-averaged generalised potential and kinetic energies are conserved over its time period.This implies that,as the averaging time is increased,the time-averaged generalised potential and kinetic energies tend to constants while the time-averaged energy flows,i.e.,their rates of change with time,tend to zero.Numerical simulations on reported chaotic motions,such as the forced van der Pol system,forced Duffing system,forced smooth and discontinuous oscillator,Lorenz’s system,and Rossler's system,show the above conclusions to be correct according to the results presented herein.This discovery may indicate that chaotic phenomena in nature could be controlled because,even though their instantaneous states are disordered,their long-time averages can be predicted.
基金Supported by National Natural Science Foundation of China(Grant Nos.51375446,51575494)Zhejiang Provincial Natural Science Foundation of China(Grant Nos.LR16E050001,LZ14E050001)
文摘Soft abrasive flow(SAF) finishing can process the irregular geometric surfaces, but with the matter of low processing efficiency. To address the issue, an improved SAF finishing method based on turbulent kinetic energy enhancing is proposed. A constrained flow passage with serration cross-section is constructed to increase the turbulence intensity. Taking the constrained flow passage as the objective, a two-phase fluid dynamic model is set up by using particle trajectory model and standard k-ε turbulence model, and the flow field characteristics of the flow passage are acquired. The numerical results show that the serration flow passage can enhance the turbulence intensity, uniform the particles distribution, and increase the particle concentration near the bottom wall. The observation results by particle image velocimetry(PIV) show that the internal vortex structures are formed in flow passage, and the abrasive flow takes on turbulence concentrating phenomenon in near-wall region. The finishing experiments prove that the proposed method can obtain better surface uniformity, and the processing efficiency can be improved more 35%. This research provides an abrasive flow modeling method to reveal the particle motion regulars, and canoffer references to the technical optimization of fluid-based precision processing.
文摘The main characteristics of energy environment, energy products, primary productivity and basic process ofenergy flow for three-hardwood forest(Juglans mandshurica, Fraxinus mandshurica, and Phellodendron amurense) werestudied. The research was mainly hased on the thcory and method of community energetics, dealing with fixed position,quantitative test and expcrimental analysis. The time-space dynamics of sun-radiation in three-hardwood forest were measured and the energy compartment model was set up. his rescarch work provided a scientitic basis for the exploitation, utilization and management of three-hardtwood forest.
文摘Energy resilience is about ensuring a business and end-use consumers have a reliable,regular supply of energy and contingency measures in place in the event of a power failure,generating a source of power such as electricity for daily needs from an uninterrupted source of energy no matter either renewable or nonrenewable.Causes of resilience issues include power surges,weather,natural disasters,or man-made accidents,and even equipment failure.The human operational error can also be an issue for grid-power supply to go down and should be factored into resilience planning.As the energy landscape undergoes a radical transformation,from a world of large,centralized coal plants to a decentralized energy world made up of small-scale gas-fired production and renewables,the stability of electricity supply will begin to affect energy pricing.Businesses must plan for this change.The challenges that the growth of renewables brings to the grid in terms of intermittency mean that transmission and distribution costs consume an increasing proportion of bills.With progress in the technology of AI(Artificial Intelligence)integration of such progressive technology in recent decades,we are improving our resiliency of energy flow,so we prevent any unexpected interruption of this flow.Ensuring your business is energy resilient helps insulate against price increases or fluctuations in supply,becoming critical to maintaining operations and reducing commercial risk.In the form short TM(Technical Memorandum),this paper covers this issue.
基金This work is supported by National Natural Science Foundation of China.
文摘A study is made of the distribution of the diagnostic quantity vector E and the teleconnection structure of 30-50 (quasi-40) day oscillation, together with the dependence on the conversion of barotropic unstable energy of mean flow in terms of ECWMF daily 500 hPa grid data in winter, indicating that the energy transportation is closely associated with the westerly jet position, with zonal (meridional) propagation in the strong (weak) wind region, that considerable conversion of barotropic energy occurs at the jet exit region where low-frequency oscillation gains energy from the mean flow, leading to maximum kinetic energy for the oscillation observed there, which is marked by evident barotropy in striking contrast to the baroclinicity at low latitudes and that the teleconnection core is related to the center of action in the atmosphere and bound up with the pattern of the west wind.
基金supported by the National Natural Science Foundation of China(Grant Nos. 40930950 and 40921160379)the National Basic Research Program of China(Grant No.2010CB428603)
文摘The local features of transient kinetic energy and available potential energy were investigated using ECMWF (European Centre for Medium-Range Weather Forecasts) Interim Reanalysis data for the stratospheric sudden warming (SSW) event of January 2009. The Western Europe high plays important roles in the propagation of the energy from North America to Eurasian. When the Western Europe high appeared and shifted eastward, energy conversions increased and energy propagated from North America to Eurasian as a form of interaction energy flow. The baroclinic conversion between transient-eddy kinetic energy (Ke) and transient-eddy available potential energy (Ae) and the horizontal advection of geopotential height were approximately one order of magnitude less than Ke and Ae generation terms. So, these terms were less important to this SSW event.
文摘Accurate electric energy(EE)measurements and billing estimations in a power system necessitate the development of an energy flow distribution model.This paper summarizes the results of investigations on a new problem related to the determination of EE flow in a power system over time intervals ranging from minutes to years.The problem is referred to as the energy flow problem(EFP).Generally,the grid state and topology may fluctuate over time.An attempt to use instantaneous(not integral)power values obtained from telemetry to solve classical electrical engineering equations leads to significant modeling errors,particularly with topology changes.A promoted EFP model may be suitable in the presence of such topological and state changes.Herein,EE flows are determined using state estimation approaches based on direct EE measurement data in Watt-hours(Volt-ampere reactive-hours)provided by electricity meters.The EFP solution is essential for a broad set of applications,including meter data validation,zero unbalance EE billing,and nontechnical EE loss check.
文摘It is impossible to overstate the importance of energy.Just thinking about where humanity would be without it may be enough to demonstrate this point.Like in the past,energy will play a vital role in shaping future industries,cities,nations,and the world.That is why we believe that energy is a critical factor in shaping future paradigms in any target entity or world.To have a better understanding of the role that energy plays in the world today and in the future,in this article,we briefly look at the definition of energy and its different forms,and review some data related to energy consumption in the world and the United States.Furthermore,as a source of clean energy,we believe the future of nuclear power technology,despite the challenges it faces,is an important option for this country and the rest of the world to meet future energy needs without emitting CO(carbon monoxide)and CO2(carbon dioxide),or other GHGs(greenhouse gases),and other atmospheric pollutants and it is more efficient among its other comparable sources of renewable energies,such as solar,wind,etc.Globally,renewables made up 29 percent of electricity generation in 2020,much of it from hydro-power(16.8 percent).A record amount of over 256 GW of renewable power capacity was added globally during 2020 and continues to be the focal point for climate and energy solutions.Demand for electricity is direct function of population growth globally and is also driven by the present century’s extraordinary technological developments.
文摘Developing an integrated and intelligent approach to securing the ITE(information technology environment)is an emergent and evolving concern for every organization and consumer entity during the last few decades.Major topics of concern include“SI”(security intelligence),“D-DA”(data-driven analytics),“PE”(proven expertise),and“R-TD”(real-time defense)capabilities.“DRBTs”(dynamic response behavior types)include“incident response”,“endpoint management”,“threat intelligence”,“network security”,and“fraud protection”.The consumer demand for electricity as essential public access and service is indexed to population growth estimates.Consumer-driven economies continue to add electrical consumption to their grids even though improvements in lower-power consumption and higher design efficiencies are present in new electric-powered products.Dependence on the production of electrical energy has no peer replacement technology and creates a societal vulnerability to targeted public electrical grid interruptions.When access to,or production of,electrical power is interrupted,the result is a“Mass Effect”every consumer feels with equal distribution.Electric grid security falls directly into the levels of authorized,and unauthorized,access via the“IoT”(Internet of Things)concepts,and the“IoM2M”(Internet of Machine-to-Machine)integration.Electrical grid operations that include production and network management augment each other in order to support the demand for electricity every day either in peak or off-peak,thus cybersecurity plays a big role in the protection of such assets at our disposal.With help from AI(artificial intelligence)integrated into the IoT a resilient system can be built to protect the electric grid system nationwide and will be able to detect and preempt Smart Malware attacks.
基金Supported by the National Natural Science Foundation of China under Grant No 11505150the Yuncheng University Research Project under Grant No YQ-2014014the China Postdoctoral Science Foundation under Grant No 2015M582730
文摘Within the isospin-dependent quantum molecular dynamics model, we investigate the nuclear collective flows produced in semi-central 197 Au+197 Au collisions at intermediate energies. The neutron proton differential flows and difference of neutron proton collective flows are sensitive to the momentum-dependent symmetry potential. This sensitivity is less affected by both the isoscalar part of nuclear equation of state and in-medium nucleon- nucleon cross sections. Moreover, this sensitivity becomes pronounced with increasing the rapidity cut.
文摘A mass-balanced model was constructed to determine the flow-energy in a community of fishes and invertebrates in the Beibu Gulf, northern South China Sea using Ecopath and Ecosim software. Input parameters were taken from the literature, except for the biomass of fish groups which was obtained from trawl surveys during October 1997 to May 1999 in the study area. The model consisted of 16 functional groups (boxes), including one marine mammal and seabirds, each representing organisms with a similar role in the food web, and only covered the main trophic flow in the Beibu Gulf ecosystem. The results showed that the food web of Beibu Gulf was dominated by the detrital path and benthic invertebrates played a significant role in transferring energy from the detritus to higher trophic levels; phytoplankton was a primary producer and most utilized as a food source. Fractional trophic levels ranged from 1.0 to 4.08 with marine mammals occupying the highest trophic level. Using network analysis, the system network was mapped into a linear food chain and six discrete trophic levels were found with a mean transfer efficiency of 16.7% from the detritus, 16.2% from the primary producer within the ecosystem. The biomass density of the commercially utilized species estimated by the model is 8.46 t/km^2, only O. 48% of the net primary production.
基金This study was supported bythe National Natural Science Foundation of China (Grant Nos 40476039 and 50339010)
文摘Based on the 2-D flow and sediment numerical model of the Yangtze Estuary and the Hangzhou Bay, the characteristics of water and sediment exchange in their joint waters is studied through quantitative calculation and analysis of the characteristics of water flow and sediment transportation. The results show that there is periodical water and sediment exchange in this joint waters, that the net water exchange appears mainly between 0 - 6 m depth (theoretical datum plane, the same below) offshore and the maximum is near the depth of 2 m, and that the net sediment exchange mainly appears between 0 - 5 m depth and the maximum is near the depth of 3 m, indicating that the range of water flow passage is different from that of sediment transport from the Yangtze Estuary to the Hangzhou Bay. Combined with the results of numerical simulation, this paper also analyzes the hydrodynamical mechanism influencing water and sediment exchange between the Yangtze Estuary and the Hangzhou Bay, including tidal fluctuation, tidal current kinetic energy, tide-induced residual current and the trace of water particles. Finally, the sediment transportation passage on the Nanhui tidal fiat is discussed, and the results show that sediment is transported into the Hangzhou Bay from the south side of Shipilei, while sediment is brought back to the South Channel of the Yangtze Estuary from the north side.
基金financially supported by the Mid-Career Researcher Program through the National Research Foundation of Korea funded by the Ministry of Education,Science and Technology(NRF-2020R1A2C1008105)。
文摘Samples of Mg-8.2Gd-3.8Y-1.1Zn-0.4Zr alloy with and without an intragranular lamellae-shaped long period stacking ordered(LPSO)phase were prepared through heat treatment and a series of hot compression tests on these materials were conducted to examine and evaluate the influence of LPSO on the hot compressive deformation behavior and deformation mechanisms at a given alloy composition.The values of activation energy for plastic flow(Qc)of the solution treated(without LPSO phase)and annealed alloys(with intragranular LPSO phase)were larger than that for pure Mg,indicating that the presence of a high amount of rare earth(RE)elements and LPSO in the Mg matrix significantly increases Qc.The Qcvalue of the annealed alloy was larger than that of the solution treated alloy at all the strain levels(223.3 vs.195.5 k J/mol in average)and the largest difference in Qcbetween the two alloys was recorded at the smallest strain of 0.1 where precipitation of LPSO during deformation was limited in the solution treated alloy.These observations imply that the formation of LPSO phase out of the RE-rich solid solution matrix during deformation increases Qc,but the increment is not so large.Analysis of the hot compressive data of the alloys with LPSO phase and the alloys with RE-rich solid solution matrix in literatures indicates the similarity of the effect of the LPSO and RE-rich solid solution matrix phases on Qcand high-temperature strength.
基金the Special Funds for Major State Basic Research Projects,China(No.2003CB615705).
文摘The theological behavior of poly(vinylidene fluoride)(PVDF)samples of different molecular weights was investigated by means of high pressure capillary rheometer and rotational rheometer.Information on the rheological properties of such materials above melt temperatures is of interest as this can lead to an improved understanding of polymer behavior in processing and fabrication technologies.Shift factors derived from time-temperature superposition showed good fit to the Arrhenius equation with a flow activa...