Non-artifact vector P- and S-wave separation for elastic reverse time migration

Elastic reverse time migration(RTM)uses the elastic wave equation to extrapolate multicomponent seismic data to the subsurface and separate the elastic wavefield into P-and S-waves.P-and S-wave separation is a necessary step in elastic RTM to avoid crosstalk between coupled wavefields.However,the current curl-divergence operator-based separation method has a polarity reversal problem in PS imaging,and vector separation methods often have separation artifacts at the interface,which affects the quality of the imaging stack.We propose a non-artifact P-and S-wave separation method based on the first-order velocity-strain equation.This equation is used for wavefield extrapolation and separation in the first-order staggered-grid finite-difference scheme,and the storage and calculation amounts are consistent with the classical first-order velocity-stress equation.The separation equation does not calculate the partial derivatives of the elastic parameters,and thus,there is no artifact in the separated Pand S-waves.During wavefield extrapolation,the dynamic characteristics of the reflected wave undergo some changes,but the transmitted wavefield is accurate;therefore,it does not affect the dynamic characteristics of the final migration imaging.Through numerical examples of 2 D simple models,part SEAM model,BP model,and 3 D 4-layer model,different wavefield separation methods and corresponding elastic RTM imaging results are analyzed.We found that the velocity-strain based elastic RTM can image subsurface structures well,without spike artifacts caused by separation artifacts,and without polarity reversal phenomenon of the PS imaging.

Double-difference tomography of P- and S-wave velocity structure beneath the western part of Java, Indonesia

West Java in the western part of the Sunda Arc has a relatively high seismicity due to subduction activity and faults.In this study,double-difference tomography was used to obtain the 3D velocity tomograms of P and S waves beneath the western part of Java.To infer the geometry of the structure beneath the study area,precise earthquake hypo・center determination was first performed before tomographic imaging.For this,earthquake waveform data were extracted from the regional Meteorological,Climatological,Geophysical Agency(BMKG)network of Indonesia from South Sumatra to Central Java.The P and S arrival times for about 1,000 events in the period April 2009 to July 2016 were selected,the key features being events of magnitude>3,azimuthal gap<210°and number of phases>8.A nonlinear method using the oct-tree sampling algorithm from the NonLinLoc program was employed to determine the earthquake hypocenters.The hypocenter locations were then relocated using double-difference tomography(tomoDD).A significant reduction of travel-time(root mean square basis)and a better clustering of earthquakes were achieved which correlated well with the geological structure in West Java.Double-difference tomography was found to give a clear velocity structure,especially beneath the volcanic arc area,i.e.,under Mt Anak Krakatau,Mt Salak and the mountains complex in the southern part of West Java.Low velocity anomalies for the P and S waves as well as the vp/vs ratio below the volcanoes indicated possible partial melting of the upper mantle which ascended from the subducted slab beneath the volcanic arc.

3D S-wave velocity structure of the Ningdu basin in Jiangxi province inferred from ambient noise tomography with dense array

The Ningdu basin,located in southern Jiangxi province of southwest China,is one of the Mesozoic basin groups which has exploration prospects for geothermal energy.A study on the detailed velocity structure of the Ningdu basin can provide important information for geothermal resource exploration.In this study,we deployed a dense seismic array in the Ningdu basin to investigate the 3D velocity structure and discuss implications for geothermal exploration and geological evolution.Based on the dense seismic array including 35 short-period(5 s-100 Hz)seismometers with an average interstation distance of~5 km,Rayleigh surface wave dispersion curves were extracted from the continuous ambient noise data for surface wave tomographic inversion.Group velocity tomography was conducted and the 3D S-wave velocity structure was inverted by the neighborhood algorithm.The results revealed obvious low-velocity anomalies in the center of the basin,consistent with the low-velocity Cretaceous sedimentary rocks.The basement and basin-controlling fault can also be depicted by the S-wave velocity anomalies.The obvious seismic interface is about 2 km depth in the basin center and decreases to 700 m depth near the basin boundary,suggesting spatial thickness variations of the Cretaceous sediment.The fault features of the S-wave velocity profile coincide with the geological cognition of the western boundary basincontrolling fault,which may provide possible upwelling channels for geothermal fluid.This study suggests that seismic tomography with a dense array is an effective method and can play an important role in the detailed investigations of sedimentary basins.

Forward modeling of ocean-bottom cable data and wave-mode separation in fluid–solid elastic media with irregular seabed

In marine seismic exploration, ocean-bottom cable techniques accurately record the multicomponent seismic wavefield; however, the seismic wave propagation in fluid–solid media cannot be simulated by a single wave equation. In addition, when the seabed interface is irregular, traditional finite-difference schemes cannot simulate the seismic wave propagation across the irregular seabed interface. Therefore, an acoustic–elastic forward modeling and vector-based P-and S-wave separation method is proposed. In this method, we divide the fluid–solid elastic media with irregular interface into orthogonal grids and map the irregular interface in the Cartesian coordinates system into a horizontal interface in the curvilinear coordinates system of the computational domain using coordinates transformation. The acoustic and elastic wave equations in the curvilinear coordinates system are applied to the fluid and solid medium, respectively. At the irregular interface, the two equations are combined into an acoustic–elastic equation in the curvilinear coordinates system. We next introduce a full staggered-grid scheme to improve the stability of the numerical simulation. Thus, separate P-and S-wave equations in the curvilinear coordinates system are derived to realize the P-and S-wave separation method.

Elastic modulus extraction based on generalized pre-stack PP–PS wave joint linear inversion

Joint PP–PS inversion offers better accuracy and resolution than conventional P-wave inversion. P-and S-wave elastic moduli determined through data inversions are key parameters for reservoir evaluation and fluid characterization. In this paper, starting with the exact Zoeppritz equation that relates P-and S-wave moduli, a coefficient that describes the reflections of P-and converted waves is established. This method effectively avoids error introduced by approximations or indirect calculations, thus improving the accuracy of the inversion results. Considering that the inversion problem is ill-posed and that the forward operator is nonlinear, prior constraints on the model parameters and modified low-frequency constraints are also introduced to the objective function to make the problem more tractable. This modified objective function is solved over many iterations to continuously optimize the background values of the velocity ratio, which increases the stability of the inversion process. Tests of various models show that the method effectively improves the accuracy and stability of extracting P and S-wave moduli from underdetermined data. This method can be applied to provide inferences for reservoir exploration and fluid extraction.

A physical model study of effect of fracture aperture on seismic wave

Based on Hudson’s theoretical hypothesis of equivalent fracture model,inserting aligned round chips in solid model can simulate fractured media. The effect of fractures on the propagation of P and S waves can be observed by changing the fracture thickness. The base model is made of epoxy resin,and the material of fractures is a kind of low-velocity mixture containing silicon rubber. With constant diameter and number of fractures in each model,one group of models can be formed through changing the thickness of fracture. These models have the same fracture density. By using the ultrasonic pulse transmission method,the experiment records time and waveform of P and S waves in the direction parallel and perpendicular to the fracture orientation. The result shows that,with the same fracture density,changing fracture aperture will affect both velocity and amplitude of P and S waves,and the effect on P-wave amplitude is much greater than that on the velocity. Moreover,the variation in velocity of S wave is more obvious in the slow shear wave (S2),while the variation in amplitude is more obvious in the fast shear wave (S1). These properties of wave propagation are useful for seismic data processing and interpretation.