Hydraulic Accumulator-Motor-Generator Energy Regeneration System for a Hybrid Hydraulic Excavator

Though the traditional energy regeneration system（ERS） which used a hydraulic motor and a generator in hybrid excavators can regenerate part of the energy, the power of the motor and the generator should be larger and the time for regenerating energy is so short. At first, the structure of new ERS that combines the advantages of an electric and hydraulic accumulator is analyzed. The energy can be converted into both the electric energy and the hydraulic energy at the lowering of the boom and the generator can still works when the boom stops going down. Then, a method how to set the working pressure of the hydraulic accumulator is proposed. To avoid the excess loss, extra noise and shock pressure, a two-level pressure threshold method that the generator starts to work at the rising edge of the high pressure threshold and stops working at the falling edge of the low pressure threshold is presented to characterize the working mode of the generator. The control strategies on how to control the boom velocity at the lowering of the boom and how to improve the recovery efficiency when the boom stops going down are presented. The test bench of hybrid excavator with ERS is constructed, with which the studies on the influences of ERS on energy conversion efficiency and control performance are carried out. Experimental results show that the proposed ERS features better speed control performance of the boom than traditional ERS. It is also observed that an estimated 45% of the total potential energy could be regenerated at the lowering of the boom in the proposed ERS, and the power level of the generator and the hydraulic motor could be reduced by 60%. Hence, the proposed ERS has obvious advantages over the traditional ERS on the improvement of energy regeneration time, energy efficiency, control performance and economy.

Research of Energy Regeneration Technology in Electric Vehicle

The theory of energy regeneration in electric vehicle (EV) has been introduced in most papers, but the mathematic model of EV energy regeneration system was little studied. In this paper the mathematic model of EV energy regeneration system is studied, and then the system ability under four control strategies is analyzed. In the end the system reliability is researched, and the calculation model of system reliability is proposed.

Study on Braking Energy Regeneration System for City Bus

Braking of the urban vehicles of public service wastes a large number of engine energy in the condition of starting and stopping frequently. Aiming at the problem, an electro-mechanical braking energy regeneration system was proposed which adopted a high-speed flywheel and a battery to recover the braking energy and achieve the secondary traction for the auxiliary start function. The system strategy was designed and the braking simulation was processed to validate its feasibility. The experiment results show that the system can effectively recover the braking energy, improve the starting performance of the city bus and it can be applied to the engineering.

Vibration energy regeneration of electric vehicle shock absorber

The twin-tube shock absorber was studied and the relevant factors of thermal equilibrium were simulated. The dynamic model of the shock absorber was constructed and simulation curves of force-displacement and force-velocity were output. The experiment of the twin-tube shock absorber was carried out, and the results were compared with the modeling resultss. Further, the vibration energy regeneration model was established, and the bench simulation study was carried out. The re- sults showed that the energy regeneration model not only absorbed shock energy but also converted vibration energy into electricity energy.

Comprehensive evaluation and sensitivity analysis of regeneration energy for acid gas removal plant using single and activated-methyl diethanolamine solvents

The absorption of acid gas using reactive amines is among the most widely used types of capturing technologies.However,the absorption process requires intensive energy expenditure majorly in the solvent regeneration process.This study simultaneously evaluated the regeneration energy of MDEA and PZ/MDEA solvents in terms of heat of absorption,sensible heat,and vaporization heat.Aspen Hysys version 8.8 simulation tool is applied to model the full acid gas removal plant for the chemical absorption process.The new energy balance technique presents around the absorption and desorption columns to bring a new perspective of energy distribution in the capturing of acid gas plants.Sensitivity analysis of regeneration energy and its three contributors is performed at several operation parameters such as absorber and stripper pressures,lean amine circulation rate,solvent concentration,reflux ratio,and CO2 and H2 S concentrations.The results show that the heat of absorption of PZ/MDEA system is higher than that for MDEA system for the same operating conditions.The sensible heat is the main contributor in the required regeneration energy of MDEA solvent system.The simulation results have been validated against data taken from real plant and literature.The product specifications of our simulation corroborate with real plant data in an excellent approach;additionally,the profile temperature of the absorber and the stripper columns are in good agreement with literature.The overall results highlight the direction of the effects of each parameter on the heat of absorption,sensible heat,and vaporization heat.

Research on Biomass Distribution in Counties and Comprehensive Utilization Layout of Biomass Energy in Jilin Province

Firstly, the distribution of main biomass resources （like straw, livestock manure and forestry residue） in counties of Jilin Province, and then according to the annual output of biomass in each county, the energy regeneration of biomass and project distribution of organic fertilizer were studied, finally the direct economic effect and environmental effect of biomass developed recently were calculated.

Optimal control and energy storage for DC electric train systems using evolutionary algorithms

Electrified railways are becoming a popular transport medium and these consume a large amount of electrical energy.Environmental concerns demand reduction in energy use and peak power demand of railway systems.Furthermore,high transmission losses in DC railway systems make local storage of energy an increasingly attractive option.An optimisation framework based on genetic algorithms is developed to optimise a DC electric rail network in terms of a comprehensive set of decision variables including storage size,charge/discharge power limits,timetable and train driving style/trajectory to maximise benefits of energy storage in reducing railway peak power and energy consumption.Experimental results for the considered real-world networks show a reduction of energy consumption in the range 15%–30%depending on the train driving style,and reduced power peaks.

Variants of Secondary Control with Power Recovery for Loading Hydraulic Driving Device

Current high power load simulators are generally incapable of obtaining both high loading performance and high energy efficiency. Simulators with high energy efficiency are used to simulate static-state load, and those with high dynamic performance typically have low energy efficiency. In this paper, the variants of secondary control（VSC） with power recovery are developed to solve this problem for loading hydraulic driving devices that operate under variable pressure, unlike classical secondary control（CSC） that operates in constant pressure network. Hydrostatic secondary control units are used as the loading components, by which the absorbed mechanical power from the tested device is converted into hydraulic power and then fed back into the tested system through 4 types of feedback passages（FPs）. The loading subsystem can operate in constant pressure network, controlled variable pressure network, or the same variable pressure network as that of the tested device by using different FPs. The 4 types of systems are defined, and their key techniques are analyzed, including work principle, simulating the work state of original tested device, static operation points, loading performance, energy efficiency, and control strategy, etc. The important technical merits of the 4 schemes are compared, and 3 of the schemes are selected, designed, simulated using AMESim and evaluated. The researching results show that the investigated systems can simulate the given loads effectively, realize the work conditions of the tested device, and furthermore attain a high power recovery efficiency that ranges from 0.54 to 0.85, even though the 3 schemes have different loading performances and energy efficiencies. This paper proposes several loading schemes that can achieve both high dynamic performance and high power recovery efficiency.

Advancement and new perspectives of using formulated reactive amine blends for post-combustion carbon dioxide (CO_(2)) capture technologies

Chemical absorption using amine-based solvents have proven to be the most studied,as well as the most reliable and efficient technology for capturing carbon dioxide(CO_(2))from exhaust gas streams and synthesis gas in all combustion and industrial processes.The application of single amine-based solvents especially the very reactive monoethanolamine(MEA)is associated with a parasitic energy demand for solvent regeneration.Since regeneration energy accounts for up to threeequarters of the plant operating cost,efforts in its reduction have prompted the idea of using blended amine solvents.This review paper highlights the success achieved in blending amine solvents and the recent and future technologies aimed at increasing the overall volumetric mass transfer coefficient,absorption rate,cyclic capacity and greatly minimizing both degradation and the energy for solvent regeneration.The importance of amine biodegradability(BOD)and low ecotoxicity as well as low amine volatility is also highlighted.Costs and energy penalty indices that influences the capital and operating costs of CO_(2) capture process was also highlighted.A new experimental method for simultaneously estimating amine cost,degradation rate,regeneration energy and reclaiming energy is also proposed in this review paper.