The intermittent nature of wind and solar photovoltaic energy systems leads to the fluctuation of power generated due to the fact that the power output is highly dependent upon local weather conditions, which results ...The intermittent nature of wind and solar photovoltaic energy systems leads to the fluctuation of power generated due to the fact that the power output is highly dependent upon local weather conditions, which results to the load shading issue that led to the voltage and frequency instability. In additional to that, the high proportions of erratic renewable energy sources can lead to erratic frequency changes which affect the grid stability. In order to reduce this effect, the energy storage system is commonly used in most wind-solar energy systems to balance the voltage and frequency instability during load variations. One of the innovative energy storage systems is the compressed air energy storage system (CAES) for wind and solar hybrid energy system and this technology is the key focus in this research study. The aim of this research was to examine the system configuration of the CAES system through modelling and experimental approach with PID controller design for regulating the voltage and frequency under different load conditions. The essential elements and the entire system have been presented in this work as thorough modelling in the MATLAB/Simulink environment for different load conditions. The developed model was tested through an experimental workbench using the developed prototype of the compressed air storage in the Siemens Lab at DeKUT and explored the consequence of the working parameters on the system proficiency and the model accuracy. The performance of the system for the developed prototype of CAES system was validated using results from an experimental workbench with MATLAB/Simulink R2022b simulation. The modeling and experimental results, shows that the frequency fluctuation and voltage drop of the developed CAES system during load variations was governed by the I/P converter using a PID_Compact controller programed in the TIA Portal V17 software and downloaded into PLC S7 1200. Based on these results, the model can be applied as a basis for the performance assessment of the compressed air energy storage system so as to be included in current technology of wind and solar hybrid energy systems.展开更多
With the high penetration of renewable energy,new challenges,such as power fluctuation suppression and inertial support capability,have arisen in the power sector.Battery energy storage systems play an essential role ...With the high penetration of renewable energy,new challenges,such as power fluctuation suppression and inertial support capability,have arisen in the power sector.Battery energy storage systems play an essential role in renewable energy integration.In this paper,a distributed virtual synchronous generator(VSG)control method for a battery energy storage system(BESS)with a cascaded H-bridge converter in a grid-connected mode is proposed.The VSG is developed without communication dependence,and state-of-charge(SOC)balancing control is achieved using the distributed average algorithm.Owing to the low varying speed of SOC,the bandwidth of the distributed communication networks is extremely slow,which decreases the cost.Therefore,the proposed method can simultaneously provide inertial support and accurate SOC balancing.The stability is also proved using root locus analysis.Finally,simulations under different conditions are carried out to verify the effectiveness of the proposed method.展开更多
In this paper, a new control strategy of battery-ultracapacitor hybrid energy storage system (HESS) is proposed for hybrid electric drive vehicles (HEVs). Compared to the stand, alone battery system may not be suffici...In this paper, a new control strategy of battery-ultracapacitor hybrid energy storage system (HESS) is proposed for hybrid electric drive vehicles (HEVs). Compared to the stand, alone battery system may not be sufficient to satisfy peak demand periods during transients in HEVs, the ultracapacitor pack can supply or recover the peak power and it can be used in high C-rates. However, the problem of battery-ultracapacitor hybrid energy storage system (HESS) is how to interconnect the battery and ultracapacitor and how to control the power distribution. This paper reviewed some battery-ultracapacitor hybrid energy storage system topology and investigated the advantages and disadvantages, then proposed a new control strategy. The proposed control strategy can improve the system performance and ultracapacitor utilization, while also decreasing the battery pack size to avoid the thermal runaway problems and increase the life of the battery. The experiment results showed the proposed control strategy can improve 3% - 4% ultracapacitor utilization.展开更多
柔性直流配电系统中定功率控制的换流器具有恒功率负载特性,会降低系统阻尼,对系统的稳定性产生不利影响。针对该问题,在直流配电系统中加入超导磁储能SMES(superconducting magnetic energy storage)装置来提高系统的稳定性。推导了柔...柔性直流配电系统中定功率控制的换流器具有恒功率负载特性,会降低系统阻尼,对系统的稳定性产生不利影响。针对该问题,在直流配电系统中加入超导磁储能SMES(superconducting magnetic energy storage)装置来提高系统的稳定性。推导了柔性直流配电系统的反馈控制模型,采用频域分析法研究了换流器恒功率负载特性对系统稳定性的影响,并结合数学模型和频域分析,指出SMES装置能够为电网提供正阻尼,增大了系统开环传递函数在剪切频率处的相位裕度,从而改善了系统稳定性。为防止超导磁体两端电压过高,SMES装置与直流配电网连接的DC/DC换流器需具备一定的电压调节性能,因此研究了采用模块化多电平DC/DC换流器DC-MMC(modular multilevel DC/DC converter)的SMES装置,通过调节子模块个数灵活设置换流器电压变比,在实现换流器能量双向流动的同时控制超导磁体两端电压,以保护储能装置。最后通过时域仿真波形验证了采用DC-MMC的SMES装置在提高柔性直流配电系统稳定性方面的可行性和有效性。展开更多
部分接入电池储能系统的模块化多电平换流器(MMC with partly integrated BESS,MMCPBESS)可以在接入储能的同时节约建造成本,但其控制更加复杂。针对下桥臂接入储能电池的MMC-PBESS拓扑,建立数学模型及等效电路。在此基础上给出电容电...部分接入电池储能系统的模块化多电平换流器(MMC with partly integrated BESS,MMCPBESS)可以在接入储能的同时节约建造成本,但其控制更加复杂。针对下桥臂接入储能电池的MMC-PBESS拓扑,建立数学模型及等效电路。在此基础上给出电容电压均衡策略,提出了上/下桥臂分控的控制策略,并分析了其运行边界。在MATLAB/Simulink平台搭建仿真模型,仿真了不同交直流功率比例的运行工况,所提控制策略可以在维持电容电压平衡的同时实现对电池充电的功能。该策略无需额外的环流计算,上下桥臂控制解耦,简单灵活。展开更多
为满足储能系统提供惯量和一次调频支撑功能需要对多类型储能介质集中配置和优化调控的需求,针对基于模块化多电平换流器(modularmultilevelconverter,MMC)的新型混合储能系统(hybrid energy storage system,HESS)MMC-HESS,提出了混合...为满足储能系统提供惯量和一次调频支撑功能需要对多类型储能介质集中配置和优化调控的需求,针对基于模块化多电平换流器(modularmultilevelconverter,MMC)的新型混合储能系统(hybrid energy storage system,HESS)MMC-HESS,提出了混合同步控制(hybrid synchronous control,HSC)整体策略。MMCHESS采用模块化设计,将超级电容和蓄电池分别安置在高压直流母线侧和子模块内,具备高功率密度和高能量密度的优势。阐述了混合储能系统的拓扑结构和工作原理并采用混合同步控制策略提供系统惯量和一次调频功能及故障限流时的同步能力和孤岛并网切换功能,采用滤波器实现储能功率分配,采用荷电状态(state of charge,SOC)均衡控制实现蓄电池能量均衡。最后,基于硬件在环实验平台,验证了所提拓扑结构与控制策略的可行性和有效性。实验结果表明:所提混合储能系统及其控制策略具备惯量与频率支撑能力,在故障限流、正常并网、孤岛运行之间可灵活切换,能够有效发挥混合储能的综合优势,在中压配电网中具有良好的应用前景。展开更多
文摘The intermittent nature of wind and solar photovoltaic energy systems leads to the fluctuation of power generated due to the fact that the power output is highly dependent upon local weather conditions, which results to the load shading issue that led to the voltage and frequency instability. In additional to that, the high proportions of erratic renewable energy sources can lead to erratic frequency changes which affect the grid stability. In order to reduce this effect, the energy storage system is commonly used in most wind-solar energy systems to balance the voltage and frequency instability during load variations. One of the innovative energy storage systems is the compressed air energy storage system (CAES) for wind and solar hybrid energy system and this technology is the key focus in this research study. The aim of this research was to examine the system configuration of the CAES system through modelling and experimental approach with PID controller design for regulating the voltage and frequency under different load conditions. The essential elements and the entire system have been presented in this work as thorough modelling in the MATLAB/Simulink environment for different load conditions. The developed model was tested through an experimental workbench using the developed prototype of the compressed air storage in the Siemens Lab at DeKUT and explored the consequence of the working parameters on the system proficiency and the model accuracy. The performance of the system for the developed prototype of CAES system was validated using results from an experimental workbench with MATLAB/Simulink R2022b simulation. The modeling and experimental results, shows that the frequency fluctuation and voltage drop of the developed CAES system during load variations was governed by the I/P converter using a PID_Compact controller programed in the TIA Portal V17 software and downloaded into PLC S7 1200. Based on these results, the model can be applied as a basis for the performance assessment of the compressed air energy storage system so as to be included in current technology of wind and solar hybrid energy systems.
基金This work was supported by National Natural Science Foundation of China under Grant U1909201,Distributed active learning theory and method for operational situation awareness of active distribution network.
文摘With the high penetration of renewable energy,new challenges,such as power fluctuation suppression and inertial support capability,have arisen in the power sector.Battery energy storage systems play an essential role in renewable energy integration.In this paper,a distributed virtual synchronous generator(VSG)control method for a battery energy storage system(BESS)with a cascaded H-bridge converter in a grid-connected mode is proposed.The VSG is developed without communication dependence,and state-of-charge(SOC)balancing control is achieved using the distributed average algorithm.Owing to the low varying speed of SOC,the bandwidth of the distributed communication networks is extremely slow,which decreases the cost.Therefore,the proposed method can simultaneously provide inertial support and accurate SOC balancing.The stability is also proved using root locus analysis.Finally,simulations under different conditions are carried out to verify the effectiveness of the proposed method.
文摘In this paper, a new control strategy of battery-ultracapacitor hybrid energy storage system (HESS) is proposed for hybrid electric drive vehicles (HEVs). Compared to the stand, alone battery system may not be sufficient to satisfy peak demand periods during transients in HEVs, the ultracapacitor pack can supply or recover the peak power and it can be used in high C-rates. However, the problem of battery-ultracapacitor hybrid energy storage system (HESS) is how to interconnect the battery and ultracapacitor and how to control the power distribution. This paper reviewed some battery-ultracapacitor hybrid energy storage system topology and investigated the advantages and disadvantages, then proposed a new control strategy. The proposed control strategy can improve the system performance and ultracapacitor utilization, while also decreasing the battery pack size to avoid the thermal runaway problems and increase the life of the battery. The experiment results showed the proposed control strategy can improve 3% - 4% ultracapacitor utilization.
文摘柔性直流配电系统中定功率控制的换流器具有恒功率负载特性,会降低系统阻尼,对系统的稳定性产生不利影响。针对该问题,在直流配电系统中加入超导磁储能SMES(superconducting magnetic energy storage)装置来提高系统的稳定性。推导了柔性直流配电系统的反馈控制模型,采用频域分析法研究了换流器恒功率负载特性对系统稳定性的影响,并结合数学模型和频域分析,指出SMES装置能够为电网提供正阻尼,增大了系统开环传递函数在剪切频率处的相位裕度,从而改善了系统稳定性。为防止超导磁体两端电压过高,SMES装置与直流配电网连接的DC/DC换流器需具备一定的电压调节性能,因此研究了采用模块化多电平DC/DC换流器DC-MMC(modular multilevel DC/DC converter)的SMES装置,通过调节子模块个数灵活设置换流器电压变比,在实现换流器能量双向流动的同时控制超导磁体两端电压,以保护储能装置。最后通过时域仿真波形验证了采用DC-MMC的SMES装置在提高柔性直流配电系统稳定性方面的可行性和有效性。
文摘部分接入电池储能系统的模块化多电平换流器(MMC with partly integrated BESS,MMCPBESS)可以在接入储能的同时节约建造成本,但其控制更加复杂。针对下桥臂接入储能电池的MMC-PBESS拓扑,建立数学模型及等效电路。在此基础上给出电容电压均衡策略,提出了上/下桥臂分控的控制策略,并分析了其运行边界。在MATLAB/Simulink平台搭建仿真模型,仿真了不同交直流功率比例的运行工况,所提控制策略可以在维持电容电压平衡的同时实现对电池充电的功能。该策略无需额外的环流计算,上下桥臂控制解耦,简单灵活。
文摘为满足储能系统提供惯量和一次调频支撑功能需要对多类型储能介质集中配置和优化调控的需求,针对基于模块化多电平换流器(modularmultilevelconverter,MMC)的新型混合储能系统(hybrid energy storage system,HESS)MMC-HESS,提出了混合同步控制(hybrid synchronous control,HSC)整体策略。MMCHESS采用模块化设计,将超级电容和蓄电池分别安置在高压直流母线侧和子模块内,具备高功率密度和高能量密度的优势。阐述了混合储能系统的拓扑结构和工作原理并采用混合同步控制策略提供系统惯量和一次调频功能及故障限流时的同步能力和孤岛并网切换功能,采用滤波器实现储能功率分配,采用荷电状态(state of charge,SOC)均衡控制实现蓄电池能量均衡。最后,基于硬件在环实验平台,验证了所提拓扑结构与控制策略的可行性和有效性。实验结果表明:所提混合储能系统及其控制策略具备惯量与频率支撑能力,在故障限流、正常并网、孤岛运行之间可灵活切换,能够有效发挥混合储能的综合优势,在中压配电网中具有良好的应用前景。
