Energy-efficient task allocation for reliable parallel computation of cluster-based wireless sensor network in edge computing

To efficiently complete a complex computation task,the complex task should be decomposed into subcomputation tasks that run parallel in edge computing.Wireless Sensor Network(WSN)is a typical application of parallel computation.To achieve highly reliable parallel computation for wireless sensor network,the network's lifetime needs to be extended.Therefore,a proper task allocation strategy is needed to reduce the energy consumption and balance the load of the network.This paper proposes a task model and a cluster-based WSN model in edge computing.In our model,different tasks require different types of resources and different sensors provide different types of resources,so our model is heterogeneous,which makes the model more practical.Then we propose a task allocation algorithm that combines the Genetic Algorithm(GA)and the Ant Colony Optimization(ACO)algorithm.The algorithm concentrates on energy conservation and load balancing so that the lifetime of the network can be extended.The experimental result shows the algorithm's effectiveness and advantages in energy conservation and load balancing.

Energy-Efficient Routing Using Novel Optimization with Tabu Techniques for Wireless Sensor Network

Wireless Sensor Network(WSN)consists of a group of limited energy source sensors that are installed in a particular region to collect data from the environment.Designing the energy-efficient data collection methods in largescale wireless sensor networks is considered to be a difficult area in the research.Sensor node clustering is a popular approach for WSN.Moreover,the sensor nodes are grouped to form clusters in a cluster-based WSN environment.The battery performance of the sensor nodes is likewise constrained.As a result,the energy efficiency of WSNs is critical.In specific,the energy usage is influenced by the loads on the sensor node as well as it ranges from the Base Station(BS).Therefore,energy efficiency and load balancing are very essential in WSN.In the proposed method,a novel Grey Wolf Improved Particle Swarm Optimization with Tabu Search Techniques(GW-IPSO-TS)was used.The selection of Cluster Heads(CHs)and routing path of every CH from the base station is enhanced by the proposed method.It provides the best routing path and increases the lifetime and energy efficiency of the network.End-to-end delay and packet loss rate have also been improved.The proposed GW-IPSO-TS method enhances the evaluation of alive nodes,dead nodes,network survival index,convergence rate,and standard deviation of sensor nodes.Compared to the existing algorithms,the proposed method outperforms better and improves the lifetime of the network.

Energy-Efficient Approaches for a Machine Tool Building in a University through Field Measurement and Energy Modelling

The heating,ventilating,and air conditioning(HVAC)system consumes nearly 50%of the building’s energy,especially in Taiwan with a hot and humid climate.Due to the challenges in obtaining energy sources and the negative impacts of excessive energy use on the environment,it is essential to employ an energy-efficient HVAC system.This study conducted the machine tools building in a university.The field measurement was carried out,and the data were used to conduct energymodelling with EnergyPlus(EP)in order to discover some improvements in energy-efficient design.The validation between fieldmeasurement and energymodelling was performed,and the error rate was less than 10%.The following strategies were proposed in this study based on several energy-efficient approaches,including room temperature settings,chilled water supply temperature settings,chiller coefficient of performance(COP),shading,and building location.Energy-efficient approaches have been evaluated and could reduce energy consumption annually.The results reveal that the proposed energy-efficient approaches of room temperature settings(3.8%),chilled water supply temperature settings(2.1%),chiller COP(5.9%),using shading(9.1%),and building location(3.0%),respectively,could reduce energy consumption.The analysis discovered that using a well-performing HVAC system and building shading were effective in lowering the amount of energy used,and the energy modelling method could be an effective and satisfactory tool in determining potential energy savings.

NOMA-Based Energy-Efficient Task Scheduling in Vehicular Edge Computing Networks: A Self-Imitation Learning-Based Approach

Mobile Edge Computing(MEC)is promising to alleviate the computation and storage burdens for terminals in wireless networks.The huge energy consumption of MEC servers challenges the establishment of smart cities and their service time powered by rechargeable batteries.In addition,Orthogonal Multiple Access(OMA)technique cannot utilize limited spectrum resources fully and efficiently.Therefore,Non-Orthogonal Multiple Access(NOMA)-based energy-efficient task scheduling among MEC servers for delay-constraint mobile applications is important,especially in highly-dynamic vehicular edge computing networks.The various movement patterns of vehicles lead to unbalanced offloading requirements and different load pressure for MEC servers.Self-Imitation Learning(SIL)-based Deep Reinforcement Learning(DRL)has emerged as a promising machine learning technique to break through obstacles in various research fields,especially in time-varying networks.In this paper,we first introduce related MEC technologies in vehicular networks.Then,we propose an energy-efficient approach for task scheduling in vehicular edge computing networks based on DRL,with the purpose of both guaranteeing the task latency requirement for multiple users and minimizing total energy consumption of MEC servers.Numerical results demonstrate that the proposed algorithm outperforms other methods.

Energy-Efficient UAV Trajectory Design for Backscatter Communication: A Deep Reinforcement Learning Approach

Recently,backscatter communication(BC)has been introduced as a green paradigm for Internet of Things(IoT).Meanwhile,unmanned aerial vehicles(UAVs)can serve as aerial base stations(BSs)to enhance the performance of BC system thanks to their high mobility and flexibility.In this paper,we investigate the problem of energy efficiency(EE)for an energy-limited backscatter communication(BC)network,where backscatter devices(BDs)on the ground harvest energy from the wireless signal of a flying rotary-wing quadrotor.Specifically,we first reformulate the EE optimization problem as a Markov decision process(MDP)and then propose a deep reinforcement learning(DRL)algorithm to design the UAV trajectory with the constraints of the BD scheduling,the power reflection coefficients,the transmission power,and the fairness among BDs.Simulation results show the proposed DRL algorithm achieves close-to-optimal performance and significant EE gains compared to the benchmark schemes.

ENERGY-EFFICIENT MICROWAVE COMPONENTS FOR MOBILE COMMUNICATION

In the coexisted world of 3G,4G,5G and many other specialized wireless communication systems,billions of connections could be existing for various information transmission types.Unluckily,data show that the increase of network capacity is heavily more than the increase of the network energy efficiency in recent years,which could lead to more energy consumption per transmitted bit in the future network.As basic units in mobile communication systems,microwave/RF components and modules play key roles

A Novel Negative Multinomial Distribution Based Energy-Efficient Reputation Modeling for Wireless Sensor Networks(WSNs)

In wireless sensor networks(WSNs),nodes are usually powered by batteries.Since the energy consumption directly impacts the network lifespan,energy saving is a vital issue in WSNs,especially in the designing phase of cryptographic algorithms.As a complementary mechanism,reputation has been applied to WSNs.Different from most reputation schemes that were based on beta distribution,negative multinomial distribution was deduced and its feasibility in the reputation modeling was proved.Through comparison tests with beta distribution based reputation in terms of the update computation,results show that the proposed method in this research is more energy-efficient for the reputation update and thus can better prolong the lifespan of WSNs.

Energy-efficient resource management for CCFD massive MIMO systems in 6G networks

This paper presents a co-time co-frequency fullduplex(CCFD)massive multiple-input multiple-output(MIMO)system to meet high spectrum efficiency requirements for beyond the fifth-generation(5G)and the forthcoming the sixth-generation(6G)networks.To achieve equilibrium of energy consumption,system resource utilization,and overall transmission capacity,an energy-efficient resource management strategy concerning power allocation and antenna selection is designed.A continuous quantum-inspired termite colony optimization(CQTCO)algorithm is proposed as a solution to the resource management considering the communication reliability while promoting energy conservation for the CCFD massive MIMO system.The effectiveness of CQTCO compared with other algorithms is evaluated through simulations.The results reveal that the proposed resource management scheme under CQTCO can obtain a superior performance in different communication scenarios,which can be considered as an eco-friendly solution for promoting reliable and efficient communication in future wireless networks.

Guest Editorial——Special Section on the Energy-Efficient Technologies

In the past few years, energy-efficient technologies get more and more scientific and technological interest as the energy bottleneck stops the ＂Moore＇s law＂ according to the reports of International Roadmap for Semiconductors （ITRS）. Moreover, people start to take care seriously of the environmental impact due to the Dower dissioation.

Energy-efficient reconfigurable AI processor

High computational energy-efficiency and rapid real-timeresponse are the major concerns for applications of artificial intelligencein low-power mobile and Internet of Things deviceswith limited storage capacity. Due to the outstanding superiorityof less memory requirement, low computation overheadand negligible accuracy degradation, deep neural networkswith binary/ternary weights (BTNNs) have been widely adoptedto replace traditional full-precision neural networks.

OTS Scheme Based Secure Architecture for Energy-Efficient IoT in Edge Infrastructure

For the past few decades,the Internet of Things(IoT)has been one of the main pillars wielding significant impact on various advanced industrial applications,including smart energy,smart manufacturing,and others.These applications are related to industrial plants,automation,and e-healthcare fields.IoT applications have several issues related to developing,planning,and managing the system.Therefore,IoT is transforming into G-IoT(Green Internet of Things),which realizes energy efficiency.It provides high power efficiency,enhances communication and networking.Nonetheless,this paradigm did not resolve all smart applications’challenges in edge infrastructure,such as communication bandwidth,centralization,security,and privacy.In this paper,we propose the OTS Scheme based Secure Architecture for Energy-Efficient IoT in Edge Infrastructure to resolve these challenges.An OTS-based Blockchain-enabled distributed network is used at the fog layer for security and privacy.We evaluated our proposed architecture’s performance quantitatively as well as security and privacy.We conducted a comparative analysis with existing studies with different measures,including computing cost time and communication cost.As a result of the evaluation,our proposed architecture showed better performance.

Energy-Efficient Routing Algorithm Based on Multipath Routing in Large-Scale Networks

A reduction in network energy consumption and the establishment of green networks have become key scientific problems in academic and industrial research.Existing energy efficiency schemes are based on a known traffic matrix,and acquiring a real-time traffic matrix in current complex networks is difficult.Therefore,this research investigates how to reduce network energy consumption without a real-time traffic matrix.In particular,this paper proposes an intra-domain energy-efficient routing scheme based on multipath routing.It analyzes the relationship between routing availability and energy-efficient routing and integrates the two mechanisms to satisfy the requirements of availability and energy efficiency.The main research focus is as follows:(1)A link criticality model is evaluated to quantitatively measure the importance of links in a network.(2)On the basis of the link criticality model,this paper analyzes an energy-efficient routing technology based on multipath routing to achieve the goals of availability and energy efficiency simultaneously.(3)An energy-efficient routing algorithm based on multipath routing in large-scale networks is proposed.(4)The proposed method does not require a real-time traffic matrix in the network and is thus easy to apply in practice.(5)The proposed algorithm is verified in several network topologies.Experimental results show that the algorithm can not only reduce network energy consumption but can also ensure routing availability.

Energy-efficient low-latency virtual cluster synchronization algorithm based on SMAC protocol in wireless sensor networks

The MAC protocol design for wireless sensor networks has been researched and developed for decades. SMAC protocol is a famous energy-efficient MAC protocol. Based on SMAC protocol, we find that the boundary nodes in the cluster-shaped synchronization structure bring energy consumption seriously, and provide a virtual cluster aggregation (VCA) algorithm. Because the bounder node follows multiple schedules in one cycle, it may deplete earlier and cause segmentation in wireless sensor networks. The algorithm reduces energy consumption of boundary nodes and extends the lifetime of entire sensor network by merging different virtual clusters, but increases the data transmission delay. Because the sensor nodes have the fixed duty cycle, the larger the coverage area of network is, the greater the data transmission delay increases. We propose the dynamic duty cycle (DDC) algorithm to solve this effect. When the network load and data transmission delay increase, the DDC algorithm exponentially changes the duty cycle of the node to reduce latency. The simulation results show that the performance of SMAC with the VCA and DDC algorithm obtains improvement significantly.

Special Section on Energy-Efficient Technologies--Crowd Energy Applications

Digital transformation generally refers to the process of change in business and society,based on the omnipresence of sensors,networks,information,andcommunication technology.Ever shorter development and innovation cycles are a characteristic feature of this process,which is currently influencing all industries and all areas of life,be it industrial

Guest Editorial Special Section on Energy-Efficient Technologies--Crowd Energy Applications

Since decades, the global electricity demand shows only one direction： a considerable constant increase every year. But the unlimited growth in energy consumption is discussed increasingly critical, not only primarily in terms of limitations but also in terms of more efficient, more intelligent, and more sustainable usage of energy. Energy-efficient technologies （EET） and renewable energy technologies are already in a competitive position in different markets, and they are also actively embedded in scientific research. Meanwhile,

Special Section on Green Technologies: Energy-Efficient Circuits, Systems, and Devices

Green technologies refer to environmentally sustainable approaches to our daily lifestyle, industry, computing, IT, and literally everything. As the enabling technology, the electronics, including circuits, systems, and devices, are the key areas of research interests in green technologies. To be green means lower power and higher energy efficiency in the user＇s side and better management of energy sources in the provider＇s side. In the recent several years, the energy-efficient devices, circuits, and systems have received considerable attention in both academia and industry. It has been a clear trend that it is and will continue to be an area of extensive research interests in the coming years. In connection with the above view, and being invited by the Editor, Ms. Jasmine Xuan Xie, we have proposed this Special Section on Green Technologies：

Guest Editorial：Special Issue on Energy-Efficient Technologies--Crowd Energy Applications

The disruption of digital technologies has been a reality in many different industrial sectors for many years.The digital transformation is now having an increasing impact on the energy sector as well as the so-called"smart environments",e.g. bottom-to-bottom energy provision models (crowd energy) are no longer just

AN ENERGY-EFFICIENT OPTIMIZATION DEPLOYMENT SCHEME FOR WIRELESS SENSOR NETWORKS

Most of the current deployment schemes for Wireless Sensor Networks (WSNs) do not take the network coverage and connectivity features into account, as well as the energy consumption. This paper introduces topology control into the optimization deployment scheme, establishes the mathe-matical model with the minimum sum of the sensing radius of each sensors, and uses the genetic al-gorithm to solve the model to get the optimal coverage solution. In the optimal coverage deployment, the communication and channel allocation are further studied. Then the energy consumption model of the coverage scheme is built to analyze the performance of the scheme. Finally, the scheme is simulated through the network simulator NS-2. The results show the scheme can not only save 36% energy av-eragely, but also achieve 99.8% coverage rate under the condition of 45 sensors being deployed after 80 iterations. Besides, the scheme can reduce the five times interference among channels.

Special Section on Energy-Efficient Technologies:NoC Circuits, Architectures, and Systems

Energy consumption has been one of the major challenges and concerns for the electronic devices design, especially in high-performance multi- and many-core systems. A highly integrated many-core chip is prone to be extremely high-power consumption that exceeds the chip＇s power budget set leaded by cooling, packaging and/or the capacity of the power supply. When this situation happens, various parts of the many-core chip will have to be deliberately switched off （darkened） so that the chip is still in compliance with its power budget, which is referred as ＂dark silicon＂. Therefore, the research on energy efficient computing is a current trend and will continue to be an active area in the coming years.

Guest Editorial——Special Section on Energy-Efficient Technologies

As global energy demands continue increasing, the constant improvement of energy efficiency has been a consensus in the world wide and received more and more attention from not only the technical but also the sociological, economic, and political sectors. Energy efficient technologies have been not only transforming the way that energy is produced, delivered, and consumed, but also changing every aspect of our life and even the future.