With time concrete / reinforced concrete has become the popular material for construction. Modern industry utilizes this material a lot and has produced various beautiful, eye catching and amazing structures. Due to m...With time concrete / reinforced concrete has become the popular material for construction. Modern industry utilizes this material a lot and has produced various beautiful, eye catching and amazing structures. Due to modern requirements for living and developed construction industries, the old buildings (usually constructed with brick masonry) are demolished and are replaced with new modern buildings. Demolition of buildings results in waste materials which can create waste related problems and environmental issues. By using recycled aggregates weight of concrete can also be reduced, which can also solve problems related to self-weight of concrete. In this paper attempt has been made to use local used bricks from vicinity of Nawabshah, Pakistan, as coarse aggregate. Concrete cubes made with local recycled bricks are cast and tested for overall weight of concrete, moisture content, dynamic modulus of elasticity and compressive strength (nondestructive and destructive methods). The results showed that concrete derived from recycled aggregates attained lower strength than regular concrete. More detailed elaborated work is recommended with different mix ratios and different proportions recycled aggregates for better conclusions.展开更多
The failure characteristics of recycled concrete containing brick aggregates are still indistinct,especially how the angular aggregates effect the crack propagation.Based on the concept of modeled concrete,the develop...The failure characteristics of recycled concrete containing brick aggregates are still indistinct,especially how the angular aggregates effect the crack propagation.Based on the concept of modeled concrete,the development of cracks in concrete containing the natural aggregate and brick aggregate under a compression loading was studied.The strain distribution was analyzed with the Digital Image Correlation(DIC).The modeled aggregates include circular and squared ones,and the squared modeled aggregates were placed in different orientations,including 0°,22.5°and 45°.The results show that when the aggregate is placed at 45°,the upper and lower vertices of the aggregate lead to the highest critical strain concentration,therefore,cracks are easy to propagate from these areas and the strength of the corresponding modeled concrete is the lowest.When the modeled natural aggregate is placed at the orientation of 0°,the strain concentration first appears at the interface on both lateral sides of the aggregate.The brick aggregate has a lower elastic modulus and strength than the surrounding mortar.As a result,cracks always propagate through the brick aggregate,which is the primary reason for the low strength of the corresponding concrete.展开更多
In order to monitor and forecast the deformation of the brick-concrete building, by taking a brick-concrete building as research object, fiber grating sensors were used to collect the monitoring data and double logari...In order to monitor and forecast the deformation of the brick-concrete building, by taking a brick-concrete building as research object, fiber grating sensors were used to collect the monitoring data and double logarithmic curve of limit value characteristic and monitoring data were obtained based on the fractal theory. Constant dimension fractal method cannot be used to analyze the data directly. With the method of variable dimension fractal, we accumulate data, and the double logarithmic curve is smooth. Piecewise fractal dimensions are close. The outer interpolation method is used to calculate the fractal dimension of the next point and then back calculate the vertical displacement. The relative errors are calculated by comparing the forecast values and monitoring values, and the maximum relative error is 5.76%. The result shows that the fractal theory is suitable to use in the forecast of the deformation and the accuracy is good.展开更多
The utilization of steel slag has been a worldwide issue for a long time. Attention is increasingly being paid to the technological innovation and development of steel slag. Aiming at the development of environmentall...The utilization of steel slag has been a worldwide issue for a long time. Attention is increasingly being paid to the technological innovation and development of steel slag. Aiming at the development of environmentally friendly steel slag concrete materials and their use in a recyclable economy ,Baosteel has recently been conducting research on and using many new building materials, including steel slag powder concrete, steel slag pervious concrete, steel slag counter weight concrete and so on. In this way, steel slag has been turned from a kind of solid waste into a value-added material. The technology of steel slag utilization has been enriched and developed,while a new model of using Baosteel steel slag in a recyclable economy has also been explored and practised.展开更多
This paper presents three-dimensional finite element (FE) analyses of an all-frame model of a three-story reinforced concrete (RC) building damaged in the 1999 Taiwan Chi-Chi Earthquake. Non-structural brick walls...This paper presents three-dimensional finite element (FE) analyses of an all-frame model of a three-story reinforced concrete (RC) building damaged in the 1999 Taiwan Chi-Chi Earthquake. Non-structural brick walls of the building acted as a seismic resistant element although their contributions were neglected in the design. Hence, the entire structure of a typical frame was modeled and static and dynamic nonlinear analyses were conducted to evaluate the contributions of the brick walls. However, the results of the analyses were considerably overestimated due to coarse mesh discretizations, which were unavoidable due to limited computer resources. This study corrects the overestimations by modifying (1) the tensile strengths and (2) shear stiffness reduction factors of concrete and brick. The results indicate that brick walls improve frame strength although shear failures are caused in columns shortened by spandrel walls. Then, the effectiveness of three types of seismic retrofits is evaluated. The maximum drift of the first floor is reduced by 89.3%, 94.8%, and 27.5% by Steel-confined, FuI1-RC, and Full-brick models, respectively. Finally, feasibility analyses of models with soils were conducted. The analyses indicated that the soils elongate the natural period of building models although no significant differences were observed.展开更多
The use of zincilate production of concrete pavement brick both use of industrial solid waste, protect the environment and promoting building energy efficiency, there are huge comprehensive benefits. Based on the guiz...The use of zincilate production of concrete pavement brick both use of industrial solid waste, protect the environment and promoting building energy efficiency, there are huge comprehensive benefits. Based on the guizhou bijie zincilate as the main raw material preparation from concrete pavement brick, and the main factors which influence the quality of the products was investigated. The test results show that: Concrete pavement brick compressive strength at 28 days with zinc slag volume increases, zinc slag admixture is 40%, 28 days compressive strength is more than 32 MPa.展开更多
The technology of concrete has significantly increased in recent years through the use of super plasticizer and availability of mineral additions. One of the most recent materials used as an additive, replacing a port...The technology of concrete has significantly increased in recent years through the use of super plasticizer and availability of mineral additions. One of the most recent materials used as an additive, replacing a portion of cement in concrete, is fine clay fired at a temperature of 800℃ to 900℃. This research is based on trials that complied with artificial pozzolan (waste crushed brick), and their effect on the rheological and mechanical behavior of mortar. The addition of 5% of a waste crushed brick has helped not only to improve the strength (tensile and compression), but also to foster a better rheological behavior in terms of fluidity and stability, with a low heat of hydration compared to control. However, tests of optimizing the content of self-compacting concrete (SCC) in coarse aggregates, sand and binder, led us to confirm that the combined mass of more optimal (better workability and stability) is that based on low in volumetric percentage of sand/paste with a granular skeleton richest gravel low dimensions (2/3 of G 3/8 and 1/3 of G 8/15).展开更多
作为西南山区最为频发的地质灾害之一,滑坡对山区中大量存在的砖混房屋造成严重影响,尤其农村山区中受灾最为严重,给人民群众生产生活造成巨大安全隐患.研究滑坡引起的上部砖混结构变形特征,对科学指导房屋设计防护及灾后监测点布置具...作为西南山区最为频发的地质灾害之一,滑坡对山区中大量存在的砖混房屋造成严重影响,尤其农村山区中受灾最为严重,给人民群众生产生活造成巨大安全隐患.研究滑坡引起的上部砖混结构变形特征,对科学指导房屋设计防护及灾后监测点布置具有重要现实意义.本文以酉阳高园子滑坡为例,通过现场调查和裂缝参数拟合研究了滑坡区砖混结构变形破坏特征.同时基于PFC3D,构建了有限体积-离散元(Finite Volume Method-Discrete Element Method,FVM-DEM)滑坡-房屋单向耦合模型,模拟并分析了在不同工况下滑坡动态发育过程,进一步揭示了房屋裂缝产生及演化过程.结果表明:相比于普通无柱砖混结构,底框结构抵抗滑坡诱发变形破坏的能力更强,并且处于前后缘段的房屋相对中段房屋更易出现损伤破坏;房屋的长宽比不宜过小,布置房屋长边走向平行斜坡走向有利于减少滑坡对房屋造成的破坏.本文总结了在滑坡作用下,上部砖混结构的变形特征和裂缝开展规律,可为农村山区砖混结构设计和布置提供参考.展开更多
文摘With time concrete / reinforced concrete has become the popular material for construction. Modern industry utilizes this material a lot and has produced various beautiful, eye catching and amazing structures. Due to modern requirements for living and developed construction industries, the old buildings (usually constructed with brick masonry) are demolished and are replaced with new modern buildings. Demolition of buildings results in waste materials which can create waste related problems and environmental issues. By using recycled aggregates weight of concrete can also be reduced, which can also solve problems related to self-weight of concrete. In this paper attempt has been made to use local used bricks from vicinity of Nawabshah, Pakistan, as coarse aggregate. Concrete cubes made with local recycled bricks are cast and tested for overall weight of concrete, moisture content, dynamic modulus of elasticity and compressive strength (nondestructive and destructive methods). The results showed that concrete derived from recycled aggregates attained lower strength than regular concrete. More detailed elaborated work is recommended with different mix ratios and different proportions recycled aggregates for better conclusions.
基金the National Natural Science Foundation of China(Nos.52078358,51325802)China Postdoctoral Science Foundation(No.2018M642079)are highly acknowledged.
文摘The failure characteristics of recycled concrete containing brick aggregates are still indistinct,especially how the angular aggregates effect the crack propagation.Based on the concept of modeled concrete,the development of cracks in concrete containing the natural aggregate and brick aggregate under a compression loading was studied.The strain distribution was analyzed with the Digital Image Correlation(DIC).The modeled aggregates include circular and squared ones,and the squared modeled aggregates were placed in different orientations,including 0°,22.5°and 45°.The results show that when the aggregate is placed at 45°,the upper and lower vertices of the aggregate lead to the highest critical strain concentration,therefore,cracks are easy to propagate from these areas and the strength of the corresponding modeled concrete is the lowest.When the modeled natural aggregate is placed at the orientation of 0°,the strain concentration first appears at the interface on both lateral sides of the aggregate.The brick aggregate has a lower elastic modulus and strength than the surrounding mortar.As a result,cracks always propagate through the brick aggregate,which is the primary reason for the low strength of the corresponding concrete.
文摘In order to monitor and forecast the deformation of the brick-concrete building, by taking a brick-concrete building as research object, fiber grating sensors were used to collect the monitoring data and double logarithmic curve of limit value characteristic and monitoring data were obtained based on the fractal theory. Constant dimension fractal method cannot be used to analyze the data directly. With the method of variable dimension fractal, we accumulate data, and the double logarithmic curve is smooth. Piecewise fractal dimensions are close. The outer interpolation method is used to calculate the fractal dimension of the next point and then back calculate the vertical displacement. The relative errors are calculated by comparing the forecast values and monitoring values, and the maximum relative error is 5.76%. The result shows that the fractal theory is suitable to use in the forecast of the deformation and the accuracy is good.
文摘The utilization of steel slag has been a worldwide issue for a long time. Attention is increasingly being paid to the technological innovation and development of steel slag. Aiming at the development of environmentally friendly steel slag concrete materials and their use in a recyclable economy ,Baosteel has recently been conducting research on and using many new building materials, including steel slag powder concrete, steel slag pervious concrete, steel slag counter weight concrete and so on. In this way, steel slag has been turned from a kind of solid waste into a value-added material. The technology of steel slag utilization has been enriched and developed,while a new model of using Baosteel steel slag in a recyclable economy has also been explored and practised.
文摘This paper presents three-dimensional finite element (FE) analyses of an all-frame model of a three-story reinforced concrete (RC) building damaged in the 1999 Taiwan Chi-Chi Earthquake. Non-structural brick walls of the building acted as a seismic resistant element although their contributions were neglected in the design. Hence, the entire structure of a typical frame was modeled and static and dynamic nonlinear analyses were conducted to evaluate the contributions of the brick walls. However, the results of the analyses were considerably overestimated due to coarse mesh discretizations, which were unavoidable due to limited computer resources. This study corrects the overestimations by modifying (1) the tensile strengths and (2) shear stiffness reduction factors of concrete and brick. The results indicate that brick walls improve frame strength although shear failures are caused in columns shortened by spandrel walls. Then, the effectiveness of three types of seismic retrofits is evaluated. The maximum drift of the first floor is reduced by 89.3%, 94.8%, and 27.5% by Steel-confined, FuI1-RC, and Full-brick models, respectively. Finally, feasibility analyses of models with soils were conducted. The analyses indicated that the soils elongate the natural period of building models although no significant differences were observed.
文摘The use of zincilate production of concrete pavement brick both use of industrial solid waste, protect the environment and promoting building energy efficiency, there are huge comprehensive benefits. Based on the guizhou bijie zincilate as the main raw material preparation from concrete pavement brick, and the main factors which influence the quality of the products was investigated. The test results show that: Concrete pavement brick compressive strength at 28 days with zinc slag volume increases, zinc slag admixture is 40%, 28 days compressive strength is more than 32 MPa.
文摘The technology of concrete has significantly increased in recent years through the use of super plasticizer and availability of mineral additions. One of the most recent materials used as an additive, replacing a portion of cement in concrete, is fine clay fired at a temperature of 800℃ to 900℃. This research is based on trials that complied with artificial pozzolan (waste crushed brick), and their effect on the rheological and mechanical behavior of mortar. The addition of 5% of a waste crushed brick has helped not only to improve the strength (tensile and compression), but also to foster a better rheological behavior in terms of fluidity and stability, with a low heat of hydration compared to control. However, tests of optimizing the content of self-compacting concrete (SCC) in coarse aggregates, sand and binder, led us to confirm that the combined mass of more optimal (better workability and stability) is that based on low in volumetric percentage of sand/paste with a granular skeleton richest gravel low dimensions (2/3 of G 3/8 and 1/3 of G 8/15).
文摘作为西南山区最为频发的地质灾害之一,滑坡对山区中大量存在的砖混房屋造成严重影响,尤其农村山区中受灾最为严重,给人民群众生产生活造成巨大安全隐患.研究滑坡引起的上部砖混结构变形特征,对科学指导房屋设计防护及灾后监测点布置具有重要现实意义.本文以酉阳高园子滑坡为例,通过现场调查和裂缝参数拟合研究了滑坡区砖混结构变形破坏特征.同时基于PFC3D,构建了有限体积-离散元(Finite Volume Method-Discrete Element Method,FVM-DEM)滑坡-房屋单向耦合模型,模拟并分析了在不同工况下滑坡动态发育过程,进一步揭示了房屋裂缝产生及演化过程.结果表明:相比于普通无柱砖混结构,底框结构抵抗滑坡诱发变形破坏的能力更强,并且处于前后缘段的房屋相对中段房屋更易出现损伤破坏;房屋的长宽比不宜过小,布置房屋长边走向平行斜坡走向有利于减少滑坡对房屋造成的破坏.本文总结了在滑坡作用下,上部砖混结构的变形特征和裂缝开展规律,可为农村山区砖混结构设计和布置提供参考.