Application Strategy of PLC Technology in Energy-Saving Control of Tunnel Lighting

In this study,we investigated on the application of planar lightwave circuit(PLC)technology in energy-saving control of tunnel lighting.The application status of PLC in the field of energy saving followed by the necessity of energy saving in tunnel lighting was analyzed.Finally,the application of PLC in tunnel lighting energy-saving control around the three dimensions of system overall architecture design,control scheme,and program control process was investigated.The results showed that the system meets the requirements of control effect,robustness,and visual effect after trial operation,and is suitable for practical applications.

Parameters Optimization and Energy-Saving of Highway Tunnel Backlighting with LED

In order to acquire the most energy-saving luminairedistribution-parameters(LDPs)of highway tunnel interior zone backlighting,the parameters optimization model(POM)of backlighting for tunnel interior zone was established.Yanlieshan tunnel of Jiujing highway was taken as an example for the optimization.The optimal LDPs of the backlighting system of the tunnel interior zone were obtained by the POM,a comparison between the optimization results and those of Yanlieshan tunnel’s actual lighting system was performed,which showed that the optimized backlighting system with LED lamps installed according to the optimized LDPs could save energy remarkablely even under full capacity lighting condition.Illuminance and illuminance uniformity of the tunnel road surface still met the lighting demands even the LED lamp’s luminance decreased by 30%.A backlighting simulation experiment with the optimized backlighting LDPs for Yanlieshan tunnel was accomplished in the software Dialux.The simulation results basically agreed with the optimization calculated results from the POM which proved the correctness of the backlighting POM.

Energy-Saving and Control of General Indoor Lighting Elements Fed from a Micro-Controlled Hybrid Power Generation System

In this study, an off grid wind-solar hybrid power generation system was established at Afyon Kocatepe University to meet the energy need of lighting system of three different laboratories. It is planned to efficiently use the energy obtained from the designed hybrid power generation system. For this purpose, PIC 16F877 was used in controlling of lighting load of laboratories. The off-grid wind-solar hybrid power generation system consists of 570 W 24 V mono crystal solar panels, 600 W wind power generation system and accumulator groups. The load control circuit made with PIC 16F877 is designed in a manner that will control the lighting armature groups individually activate and deactivate the armature groups according to intensity of illumination in environment. Besides, separately from generation and storing units constituting the hybrid power generation system, data in kWh are recorded by means of software in 10 seconds intervals. With the obtained power generation and storing data, analyzing of power consumption data when the load control system in active or passive position is made. According to analysis results, with controlling of lighting load and using of energy obtained from off grid wind-solar hybrid power generation system, 20.6% energy saving has been ensured.

Simplified prediction model for lighting energy consumption in office building scheme design

At the scheme design stage,the potential of daylighting is significant due to the saving for electric lighting use. There are few simple tools for architects to optimize the daylighting design. Therefore,it is useful to develop a design guideline related to the evaluation of lighting energy saving potential and sunlight design strategies. This paper analyzes the impacts of different artificial lighting control methods and design parameters on daylighting. A direct correlation between lighting energy consumption and parameters such as orientations,window to wall ratio (WWR) and perimeter depth is established. A simplified prediction model is proposed to estimate lighting energy consumption with the given perimeter depth,WWR,and window transparency. Validation of the model is carried out compared with detailed lighting simulation software for an office building. After the variation analysis for these parameters,design advises for the daylighting design at scheme design phase are summarized.

Operation strategy and energy-saving of the solar lighting/heating system through spectral splitting

The performance of a solar lighting and heating system(SLHS)based on the spectral splitting effect of nanofluids is presented in this paper.SLHS through nanofluids would split the sunlight spectrum into different wavelength,and then introduce the visible light into the offices for lighting and absorb infrared energy to generate hot water.The Energy Plus software was used to analyze the energy consumption of typical office building located in the city of Harbin in China coupled with SLHS.Based on the simulation results two lighting zones were identified in the offices and the optimal lighting control strategy was developed for a full year.The performance models of SLHS with different light-receiving areas of 10 m^(2)and 40 m^(2)were simulated and validated using the existing experimental data.The overall energy-saving of the offices over a full year were analyzed using the validated model.Results demonstrated that for SLHS with the area of 40 m^(2),the rate of the energy saving in the offices due to lighting and hot water systems were 58.9%,and 19.3%,respectively.The system also had the additional benefit of reducing the cooling load of the air conditioning system during summer period together with improving the quality of the indoor environment resulting in better health and productivity of the occupants.

Advancement in materials for energy-saving lighting devices

This review provides a comprehensive account of energy efficient lighting devices, their working principles and the advancement of these materials as an underpinning to the development of technology. Particular attention has been given to solid state lighting devices and their applications since they have attracted the most interest and are the most promising. Solid state lighting devices including white light emitting diodes （LEDs）, organic LEDs （OLEDs）, quantum-dot LEDs （QLEDs） and carbon-dot LEDs （CLEDs） are promising energy efficient lighting sources for displays and general lighting. However there is no universal solution that will give better performance and efficiency for all types of applications. LEDs are replacing traditional lamp,; for both general lighting and display applications, whereas OLEDs are finding their own special application,; in various areas. QLEDs and CLEDs have advantages such as high quantum yields, narrow emission spectra, tunable emission spectra and good stability over OLEDs, so applications for these devices are being extended to new types of lighting sources. There is a great dean of research on these materials and their processing technologies and the commercial viability of these technologies appears strong.

超市高效照明系统——人性化照明节能设计

随着超市行业的发展,超市照明对运营费用、顾客感受的作用越来越明显。文中介绍了通过使用高效照明灯具系统和控制系统,实现了照明节能设计的方法。

商业照明设计

本文介绍了商业照明的发展史，商业照明的特点，以及商业照明的设计要点。

蔬果照明光源与物体的照明光谱反射关系研究

目前大型超市的蔬果、鲜肉照明能满足基本的照明需求,但缺乏理论研究,鲜有对光源光谱与被照物光谱反射关系的实验,蔬果、鲜肉照明效果不能得到优化。通过比对仿真蔬果在高低两种色温的多个同色异谱光源下的呈现效果,对蔬果反射曲线与光源光谱关系进行分析研究,讨论光源色与物体色之间的相互作用。基于物体色选取预期的光源光谱,调配合适的光源光谱应用于蔬果照明,有利于超市照明定型化、定量化发展,优化超市照明光源选用。

大型超市照明系统设计

从光源及灯具的选择、灯具的布置、普通照明配电系统及应急照明配电系统的设计、普通照明灯具及应急照明灯具的接线方法等多个方面详细阐述了大型超市照明系统设计,为类似建筑照明设计提供参考。

超市智能应急照明和疏散指示系统的设计

结合某大型超市项目,分析了智能应急照明和疏散指示系统在大型超市中的应用,阐述了智能应急照明和疏散指示系统的优势,可实现智能监测、智能控制、与消防报警系统联动三大功能,达到安全疏散的目的。

大卖场建筑节能浅析

分析了做好大卖场节能工作的重要性,结合大卖场的耗能方式,就大卖场如何节能进行了分析,阐述了具体的节能措施,重点提出了空调设置应做好的几项工作,以搞好大卖场的节能工作。

基于可见光定位的智能化无人超市系统设计

作为当前传感网络和机器自动化的一种重要应用,无人自助超市受到广泛关注和研究。随着万物互联时代的临近和无线电频段资源的紧张,可见光通信技术及自动化技术显示出极大的优势。该系统基于STM32F767IGT6单片机,通过采用卡尔曼滤波和一种基于FFT的定位算法,运用修正的三边定位法实现了室内三维定位,并具有室内导引、无人检测称重计费及防盗的功能。按顺序介绍了该系统的硬件组成、软件思维导图及数学原理,并提供了详细的分析论证。该结构简单、成本较低、功能较传统超市较为完善。