Energy-saving Technology of Vent in Passive Solar Wall of Rural House of Severe Cold Region

This paper aims at solving the problems of low thermal collection rate,inconvenient maintenance,hindering indoor using during the application of passive solar technologies in rural houses in severe cold region.All these defects prevent the passive solar houses' further development. This paper chooses trombe wall,which has higher thermal efficiency of the passive solar house,as research object. The traditional vent is improved into a new type of ventilation device. This improvement overcomes the shortcoming,which traditional vent loses huge heat,and simplifies the construction of vent. Comparing with traditional trombe wall,the energy saving rate is 15. 69%.

Study on Energy-saving Technology and Design Optimization of Facade in Cold and Severe Cold Area

This article take cold regions of nlral residential building envelope as the research object, suitability technical theory as the theoretical basis, we evaluation of rural residential energy envelope because China＇s rural areas is chmacterized by large regional differences and to find a solution for the envelope. It could be considered as the useful reference for retrofit design of similar projects.

Energy-saving Technology Application in Building Water Supply and Drainage Construction

Under the increasing demands as well as resource shortages in today’s society,energy-saving technologies in building water supply and drainage construction plays a vital role.Through the rational application of energy-saving technologies,energy consumption in water supply and drainage projects can be significantly minimized and wastage of water resources can be reduced.This will play a very promising role in promoting sustainable development of resources and environmental conservation in the modern era.This paper analyzes the application of energy-saving technology in building water supply and drainage construction,with an aspiration to make energy-saving technology more reasonable in today’s building water supply and drainage projects and to improve the quality of water supply and drainage construction projects,while achieving effective environmental protection.

Energy-Saving Technology in Indoor LTE System with DTX Based on CQI

In LTE (Long Term Evolution) system, CQI (Channel Quality Indication) is a technical method to realize adaptive modulation and coding. The dispatcher of BS (base station) would allocate resource blocks to users dynamically based on CQI of uplink and downlink channels, which is necessary in the process of uplink and downlink transmission [1]. When the CQI level of the channel is high, the energy efficiency is high. On the contrary, when the CQI level of the channel is low, the energy efficiency is low. However, if signals are not transmitted until the quality of the channel is good, energy loss may be lowered in the expense of group delay. That is to say, we take CQI into account on the basis of the technology of DTX [2] [3] (Discontinuous Transmission). According to the result of simulation, the energy consumption can be reduced by using our proposed scheme. Particularly, the energy-saving effect is significant when the load is low.

Research on Modem Passive Integrated Energy-saving Technology of the Residential Buildings under Green Building Background

This paper proposes the modem passive integrated energy-saving technology of the residential buildings under green building background. The essence of green building is to build a healthy and general environmentally friendly living environment under the premise of reducing the consumption of resources and improving the efficiency of resource utilization in the whole life cycle of construction activities. Green building bearing function is further diversified, integrated, and has a self-initiative. The development of the green building, local isolated from the original single building greening, greening, landscaping site platform, gradually developed for construction area and the surrounding green ecological system of comprehensive, three-dimensional stratified construction and network connection. Its model gradually shows the micro area of the construction of the ecological system and architectural space integration. This paper integrates the passive integrated energysaving technology to construct the novel construction paradigm.

Exploration of Energy-Saving Technologies in Building Electrical System Design

Green energy conservation is the mainstream trend in the current development of the construction industry.The application of energy-saving technology in building electrical system design can effectively reduce energy consumption,avoid unnecessary energy consumption,and truly achieve energy conservation and environmental protection.Based on this,the article elaborates on the principles of energy-saving design in building electrical systems,and actively explores the application of energy-saving technologies from different perspectives such as optimizing power supply and distribution system design,adopting high-efficiency energy-saving lighting equipment,applying renewable energy,promoting smart home technology,and improving the efficiency of building electrical equipment.

A new horizon for neuroscience:terahertz biotechnology in brain research

Terahertz biotechnology has been increasingly applied in various biomedical fields and has especially shown great potential for application in brain sciences.In this article,we review the development of terahertz biotechnology and its applications in the field of neuropsychiatry.Available evidence indicates promising prospects for the use of terahertz spectroscopy and terahertz imaging techniques in the diagnosis of amyloid disease,cerebrovascular disease,glioma,psychiatric disease,traumatic brain injury,and myelin deficit.In vitro and animal experiments have also demonstrated the potential therapeutic value of terahertz technology in some neuropsychiatric diseases.Although the precise underlying mechanism of the interactions between terahertz electromagnetic waves and the biosystem is not yet fully understood,the research progress in this field shows great potential for biomedical noninvasive diagnostic and therapeutic applications.However,the biosafety of terahertz radiation requires further exploration regarding its two-sided efficacy in practical applications.This review demonstrates that terahertz biotechnology has the potential to be a promising method in the field of neuropsychiatry based on its unique advantages.

Energy-Saving Construction Technologies for Buildings

The development of the construction industry is shifting towards low-carbon construction,so it is necessary to improve and optimize related construction concepts,methods,and processes.By improving resource and energy control efficiency in building projects,minimizing construction waste,and reducing environmental impact,a foundation for the sustainable development of the industry can be established.This paper mainly analyzes the significance of low-carbon energy-saving construction technology and the control factors of construction,summarizes the status quo of the development of building energy-saving construction,and puts forward strategies for applying building energy-saving construction technology.These strategies serve to achieve low-carbon and energy-saving goals to promote the healthy development of energy-saving construction.

Excavator Energy-saving Efficiency Based on Diesel Engine Cylinder Deactivation Technology

The hydraulic excavator energy-saving research mainly embodies the following three measures： to improve the performance of diesel engine and hydraulic component, to improve the hydraulic system, and to improve the power matching of diesel-hydraulic system-actuator. Although the above measures have certain energy-saving effect, but because the hydraulic excavator load changes frequently and fluctuates dramatically, so the diesel engine often works in high-speed and light load condition, and the fuel consumption is higher. Therefore, in order to improve the economy of diesel engine in light load, and reduce the fuel consumption of hydraulic excavator, energy management concept is proposed based on diesel engine cylinder deactivation technology. By comparing the universal characteristic under diesel normal and deactivated cylinder condition, the mechanism that fuel consumption can be reduced significantly by adopting cylinder deactivation technology under part of loads condition can be clarified. The simulation models for hydraulic system and diesel engine are established by using AMESim software, and fuel combustion consumption by using cylinder-deactivation-technology is studied through digital simulation approach. In this way, the zone of cylinder deactivation is specified. The testing system for the excavator with this technology is set up based on simulated results, and the results show that the diesel engine can still work at high efficiency with part of loads after adopting this technology; fuel consumption is dropped down to 11% and 13% under economic and heavy-load mode respectively under the condition of driving requirements. The research provides references to the energy-saving study of the hydraulic excavators.

Path Analysis of Energy-Saving Technology in Yangtze River Basin Based on Multi-Objective and Multi-Parameter Optimisation

The Yangtze River Basin in China is characterised by hot-and cold-humid climates in summer and winter, respectively. Thus, increased demand for heating and cooling energy according to the season, as well as poor indoor thermal comfort, are inevitable. To overcome this problem, this study focused on the influence of passive design and heating, ventilation, and air conditioning equipment performance on the energy performance of residential buildings, and explored potential energy-saving technology paths involving passive design and improved coefficient of performance through a multi-objective and multi-parameter optimisation technique. A large-scale questionnaire survey covering a typical city was first conducted to identify family lifestyle patterns regarding time spent at home, family type, air conditioner use habits, indoor thermal comfort, etc. Then, the actual heating and cooling energy consumption and information of model building were determined for this region. Subsequently, the design parameters of an individual building were simulated using Energyplus to investigate the cooling and heating energy consumption for a typical residential building with an air conditioner. The results indicated an improvement of approximately 30% in energy efficiency through optimisation of the external-wall insulation thickness and the external-window and shading performance, and through use of appropriate ventilation technology. Thus, a multi-objective and multi-parameter optimisation model was developed to achieve comprehensive optimisation of several design parameters. Experimental results showed that comprehensive optimisation could not only reduce cooling and heating energy consumption, but also improve the thermal comfort level achieved with a non-artificial cooling and heating source. Finally, three energy-saving technology paths were formulated to achieve a balance between indoor thermal comfort improvement and the target energy efficiency(20 kWh/(m2?a)). The findings of this study have implications for the future design of buildings in the Yangtze River Basin, and for modification of existing buildings for improved energy efficiency.

The development of slag processing technology and its impact on energy-saving and emission reduction in the metallurgical industry

This study provides an overview of the production and classification of metallurgical slag and its impact on energy-saving and emission reduction in the metallurgical industry and an analysis of the impact of key factors on slag processing technology, including a brief account of blast furnace（BF） slag processing and applications with a focus on the steel slag disposal processes and the features of some typical processes. In view of the characteristics of the basic oxygen furnace （BOF） slag and the technical difficulties faced by the traditional processes,it describes the principle,features and technical advantages of the Baosteel short-flow （BSSF） steel slag treatment process developed by Baosteel. The thinking and outlook on the direction of the development of the metallurgical slag processing process are stated.

Application Strategy of PLC Technology in Energy-Saving Control of Tunnel Lighting

In this study,we investigated on the application of planar lightwave circuit(PLC)technology in energy-saving control of tunnel lighting.The application status of PLC in the field of energy saving followed by the necessity of energy saving in tunnel lighting was analyzed.Finally,the application of PLC in tunnel lighting energy-saving control around the three dimensions of system overall architecture design,control scheme,and program control process was investigated.The results showed that the system meets the requirements of control effect,robustness,and visual effect after trial operation,and is suitable for practical applications.

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.

Development and technology status of energy storage in depleted gas reservoirs

Utilizing energy storage in depleted oil and gas reservoirs can improve productivity while reducing power costs and is one of the best ways to achieve synergistic development of"Carbon Peak–Carbon Neutral"and"Underground Resource Utiliza-tion".Starting from the development of Compressed Air Energy Storage(CAES)technology,the site selection of CAES in depleted gas and oil reservoirs,the evolution mechanism of reservoir dynamic sealing,and the high-flow CAES and injection technology are summarized.It focuses on analyzing the characteristics,key equipment,reservoir construction,application scenarios and cost analysis of CAES projects,and sorting out the technical key points and existing difficulties.The devel-opment trend of CAES technology is proposed,and the future development path is scrutinized to provide reference for the research of CAES projects in depleted oil and gas reservoirs.

Development status and prospect of underground thermal energy storage technology

Underground Thermal Energy Storage(UTES)store unstable and non-continuous energy underground,releasing stable heat energy on demand.This effectively improve energy utilization and optimize energy allocation.As UTES technology advances,accommodating greater depth,higher temperature and multi-energy complementarity,new research challenges emerge.This paper comprehensively provides a systematic summary of the current research status of UTES.It categorized different types of UTES systems,analyzes the applicability of key technologies of UTES,and evaluate their economic and environmental benefits.Moreover,this paper identifies existing issues with UTES,such as injection blockage,wellbore scaling and corrosion,seepage and heat transfer in cracks,etc.It suggests deepening the research on blockage formation mechanism and plugging prevention technology,improving the study of anticorrosive materials and water treatment technology,and enhancing the investigation of reservoir fracture network characterization technology and seepage heat transfer.These recommendations serve as valuable references for promoting the high-quality development of UTES.

6G New Multiple Access Technology

As a basic technology at physical layer of mobile communications,non-orthogonal multiple access has been attracting wide attention across the academia and the industry.During the standardization of the fifth-generation(5G)of mobile communications,3GPP conducted preliminary study on non-orthogonal multiple access without reaching the consensus to standardize the technology.

Diagnosis and treatment of refractory infectious diseases using nanopore sequencing technology:Three case reports

BACKGROUND Infectious diseases are still one of the greatest threats to human health,and the etiology of 20%of cases of clinical fever is unknown;therefore,rapid identification of pathogens is highly important.Traditional culture methods are only able to detect a limited number of pathogens and are time-consuming;serologic detection has window periods,false-positive and false-negative problems;and nucleic acid molecular detection methods can detect several known pathogens only once.Three-generation nanopore sequencing technology provides new options for identifying pathogens.CASE SUMMARY Case 1:The patient was admitted to the hospital with abdominal pain for three days and cessation of defecation for five days,accompanied by cough and sputum.Nanopore sequencing of the drainage fluid revealed the presence of orallike bacteria,leading to a clinical diagnosis of bronchopleural fistula.Cefoperazone sodium sulbactam treatment was effective.Case 2:The patient was admitted to the hospital with fever and headache,and CT revealed lung inflammation.Antibiotic treatment for Streptococcus pneumoniae,identified through nanopore sequencing of cerebrospinal fluid,was effective.Case 3:The patient was admitted to our hospital with intermittent fever and an enlarged neck mass that had persisted for more than six months.Despite antibacterial treatment,her symptoms worsened.The nanopore sequencing results indicate that voriconazole treatment is effective for Aspergillus brookii.The patient was diagnosed with mixed cell type classical Hodgkin's lymphoma with infection.CONCLUSION Three-generation nanopore sequencing technology allows for rapid and accurate detection of pathogens in human infectious diseases.

Energy-Saving Distributed Flexible Job Shop Scheduling Optimization with Dual Resource Constraints Based on Integrated Q-Learning Multi-Objective Grey Wolf Optimizer

The distributed flexible job shop scheduling problem(DFJSP)has attracted great attention with the growth of the global manufacturing industry.General DFJSP research only considers machine constraints and ignores worker constraints.As one critical factor of production,effective utilization of worker resources can increase productivity.Meanwhile,energy consumption is a growing concern due to the increasingly serious environmental issues.Therefore,the distributed flexible job shop scheduling problem with dual resource constraints(DFJSP-DRC)for minimizing makespan and total energy consumption is studied in this paper.To solve the problem,we present a multi-objective mathematical model for DFJSP-DRC and propose a Q-learning-based multi-objective grey wolf optimizer(Q-MOGWO).In Q-MOGWO,high-quality initial solutions are generated by a hybrid initialization strategy,and an improved active decoding strategy is designed to obtain the scheduling schemes.To further enhance the local search capability and expand the solution space,two wolf predation strategies and three critical factory neighborhood structures based on Q-learning are proposed.These strategies and structures enable Q-MOGWO to explore the solution space more efficiently and thus find better Pareto solutions.The effectiveness of Q-MOGWO in addressing DFJSP-DRC is verified through comparison with four algorithms using 45 instances.The results reveal that Q-MOGWO outperforms comparison algorithms in terms of solution quality.

The Philosophy of He(和):Examined from the Perspectives of Technology and Culture

Pre-modern Chinese crafts,such as iron smelting,cookery,medicine,and the production of vehicles,bows,and arrows indicate the traditional Chinese view of technology as being organic,holistic,and comprehensive.This view of technology is guided by the concept of he(和)and employs the means and methods of he,thus achieving the purport of he.In Chinese,the character he(和)possesses positive connotations.It originated from the meaning of"to season;to add flavoring to"(调和)and that of flavors being"perfectly harmonious"(和美).From this sensory experience,he gradually extended to the abstract levels of materiality,humanity,sociality,"order"(wei位),and "power,situation,force"(shi势).Finally,he was elevated to the supreme level of"qi of great harmony"(taihe zhi qi太和之气),which is comparable to the concept of dao(道).The philosophy of he has exerted wide impact on such areas as technology,art,national character,cultural psychology,and behavior patterns,and has become an integral part of China's inherent culture.The paradoxes and deviations of he hold their own profound philosophical implications that merit further exploration.As humanity confronts significant challenges,such as how we can coexist with others,with technology,and with nature,the ancient Eastern wisdom embodied in he continues to possess practical characteristics and value.

Enhancing emerging technology discovery in nanomedicine by integrating innovative sentences using BERT and NLDA

Purpose:Nanomedicine has significant potential to revolutionize biomedicine and healthcare through innovations in diagnostics,therapeutics,and regenerative medicine.This study aims to develop a novel framework that integrates advanced natural language processing,noise-free topic modeling,and multidimensional bibliometrics to systematically identify emerging nanomedicine technology topics from scientific literature.Design/methodology/approach:The framework involves collecting full-text articles from PubMed Central and nanomedicine-related metrics from the Web of Science for the period 2013-2023.A fine-tuned BERT model is employed to extract key informative sentences.Noiseless Latent Dirichlet Allocation(NLDA)is applied to model interpretable topics from the cleaned corpus.Additionally,we develop and apply metrics for novelty,innovation,growth,impact,and intensity to quantify the emergence of novel technological topics.Findings:By applying this methodology to nanomedical publications,we identify an increasing emphasis on research aligned with global health priorities,particularly inflammation and biomaterial interactions in disease research.This methodology provides deeper insights through full-text analysis and leading to a more robust discovery of emerging technologies.Research limitations:One limitation of this study is its reliance on the existing scientific literature,which may introduce publication biases and language constraints.Additionally,manual annotation of the dataset,while thorough,is subject to subjectivity and can be time-consuming.Future research could address these limitations by incorporating more diverse data sources,and automating the annotation process.Practical implications:The methodology presented can be adapted to explore emerging technologies in other scientific domains.It allows for tailored assessment criteria based on specific contexts and objectives,enabling more precise analysis and decision-making in various fields.Originality/value:This study offers a comprehensive framework for identifying emerging technologies in nanomedicine,combining theoretical insights and practical applications.Its potential for adaptation across scientific disciplines enhances its value for future research and decision-making in technology discovery.