Dry reusing and wet reclaiming of used sodium silicate sand

Based on the characteristics of used sodium silicate sand and the different use requirements for recycled sand, "dry reusing and wet reclaiming of used sodium silicate sand" is considered as the most suitable technique for the used sand. When the recycled sand is used as support sand, the used sand is only reused by dry process including breaking, screening, dust-removal, etc., and it is not necessary that the used sand is reclaimed with strongly rubbing and scraping method, but when the recycled sand is used as facing sand (or single sand), the used sand must be reclaimed by wet method for higher removal rate of the residual binders. The characteristics and the properties of the dry reused sand are compared with the wet reclaimed sand after combining the different use requirements of support sand and facing sand (or single sand), and above the most adaptive scheme has also been validated.

Assessment of Reusing Ferrochrome Slag Wastes in Mortar as SCMs

The demand for alternative cementitious materials is on the rise,as the cement causes huge energy consumption and produces greenhouse gas emission.Additionally,there is economic potential for the construction industry to reuse wastes as supplementary building materials.The purpose of this study is to evaluate the potential of utilizing ferrochrome slag wastes in mortar as supplementary cementitious materials (SCMs),thereby achieving this double-sided goal.Thus,the mechanical and physical properties of ferrochrome slag wastes were investigated to be used as admixtures in concrete production.Three different cement mortar specimens were prepared by replacing cement with ferrochrome slag in ratios of 0,30%,and 60% by mass and flexural and compressive strengths of the specimens were determined at the ages of 7,28,56,90,and 180 days.Also,the effects of the ferrochrome slag replacement ratio on workability,setting time and volume expansion were revealed.Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were also investigated to study the microstructural properties of the specimens containing ferrochrome slag.Based on the results,it is concluded that ferrochrome slag wastes have pozzolanic activity,therefore reusing them as SCMs in the cement and concrete industry is convenient.

Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review

Laser powder bed fusion(L-PBF) has attracted significant attention in both the industry and academic fields since its inception, providing unprecedented advantages to fabricate complex-shaped metallic components. The printing quality and performance of L-PBF alloys are infuenced by numerous variables consisting of feedstock powders, manufacturing process,and post-treatment. As the starting materials, metallic powders play a critical role in infuencing the fabrication cost, printing consistency, and properties. Given their deterministic roles, the present review aims to retrospect the recent progress on metallic powders for L-PBF including characterization, preparation, and reuse. The powder characterization mainly serves for printing consistency while powder preparation and reuse are introduced to reduce the fabrication costs.Various powder characterization and preparation methods are presented in the beginning by analyzing the measurement principles, advantages, and limitations. Subsequently, the effect of powder reuse on the powder characteristics and mechanical performance of L-PBF parts is analyzed, focusing on steels, nickel-based superalloys, titanium and titanium alloys, and aluminum alloys. The evolution trends of powders and L-PBF parts vary depending on specific alloy systems, which makes the proposal of a unified reuse protocol infeasible. Finally,perspectives are presented to cater to the increased applications of L-PBF technologies for future investigations. The present state-of-the-art work can pave the way for the broad industrial applications of L-PBF by enhancing printing consistency and reducing the total costs from the perspective of powders.

Study of the Possibility of Reusing Rain and Purified Water in the City of Fez, Morocco

The current work seeks firstly the integration of a rainwater reuse system that will be of use in the watering of the green spaces, and secondly the re-use of purified water in the irrigation of agriculture spaces, which are in the nearby of wastewater treatment plant. The results show that 41% of the green spaces in the city of Fez require a renovation and installation of adequate watering systems taking into account the specificity of the city which is crossed by several rivers badly exploited for watering. The purified wastewater is of much better quality than the Moroccan reuse standards and is discharged with a flow that is large enough for the irrigation water requirements of the fields close to wastewater treatment plant.

Reusing Test Cases Based on the Function Point

Reusing test cases from existing test case library is quite common in the software testing field. Testing practice tells us that there is a strong relationship between the granularity of a function unit under testing and that of the test case. A function unit with small granularity usually results in the test cases with the same small granularity. Therefore a test case defined as the function point,i. e.,the smallest size function unit,was provided for the first time.Though test cases with smaller granularity usually have better reusability,the cost of accurately reusing and integrating such test cases is also higher. In order to balance the test case reusability and the cost of test case reuse,a novel test case reuse model based on the function point was proposed in this paper. In this model,a reusable test case for specification-based testing was defined and some reuse strategies and three formal reuse methods were given. Finally,the complete automatic software process was realized by a reusing generation tool. The new method has improved reuse accuracy,while greatly enhances the software productivity.

Subband adaptive filter with variable reusing order of coefficient vectors

To increase the convergence rate of the improved normalized subband adaptive filter,a simple but effective method is presented to change the reusing order of coefficient vectors of the adaptive filter. At the beginning of adaptation the algorithmjust uses its current coefficient vector to update the adaptive filter to maintain fast convergence rate,while in steady state it employs several most recent coefficient vectors to update the adaptive filter to reduce misalignment. Simulation results showthat the proposed algorithmcan obtain both fast convergence rate and small steady-state misalignment.

Efficient desorption and reuse of collector from the flotation concentrate:A case study of scheelite

Flotation is the most common method to obtain concentrate through the selective adsorption of collectors on target minerals to make them hydrophobic and floatable.In the hydrometallurgy of concentrate,collectors adsorbed on concentrate can damage ion-exchange resin and increase the chemical oxygen demand(COD)value of wastewater.In this work,we proposed a new scheme,i.e.,desorbing the collectors from concentrate in ore dressing plant and reusing them in flotation flowsheet.Lead nitrate and benzohydroxamic acid(Pb-BHA)complex is a common collector in scheelite flotation.In this study,different physical(stirring or ultrasonic waves)and chemical(strong acid or alkali environment)methods for facilitating the desorption of Pb-BHA collector from scheelite concentrate were explored.Single-mineral desorption tests showed that under the condition of pulp pH 13 and ultrasonic treatment for 15 min,the highest desorption rates of Pb and BHA from the scheelite concentrate were 90.48%and 63.75%,respectively.Run-of-mine ore flotation tests revealed that the reuse of desorbed Pb and BHA reduced the collector dosage by 30%for BHA and 25%for Pb.The strong alkali environment broke the chemical bonds between Pb and BHA.The cavitation effect of ultrasonic waves effectively reduced the interaction intensity between Pb-BHA collector and scheelite surfaces.This method combining ultrasonic waves and strong alkali environment can effectively desorb the collectors from concentrate and provide“clean”scheelite concentrate for metallurgic plants;the reuse of desorbed collector in flotation flowsheet can reduce reagent cost for ore dressing plants.

Dewatering of Scenedesmus obliquus Cultivation Substrate with Microfiltration:Potential and Challenges for Water Reuse and Effective Harvesting

In the microalgae harvesting process,which includes a step for dewatering the algal suspension,directly reusing extracted water in situ would decrease the freshwater footprint of cultivation systems.Among various algae harvesting techniques,membrane-based filtration has shown numerous advantages.This study evaluated the reuse of permeate streams derived from Scenedesmus obliquus(S.obliquus)biomass filtration under bench-scale and pilot-scale conditions.In particular,this study identified a series of challenges and mechanisms that influence the water reuse potential and the robustness of the membrane harvesting system.In a preliminary phase of this investigation,the health status of the initial biomass was found to have important implications for the harvesting performance and quality of the permeate stream to be reused;healthy biomass ensured better dewatering performance(i.e.,higher water fluxes)and higher quality of the permeate water streams.A series of bench-scale filtration experiments with different combinations of cross-flow velocity and pressure values were performed to identify the operative conditions that would maximize water productivity.The selected conditions,2.4 m·s^(-1)and 1.4 bar(1 bar=105 Pa),respectively,were then applied to drive pilot-scale microfiltration tests to reuse the collected permeate as a new cultivation medium for S.obliquus growth in a pilot-scale photobioreactor.The investigation revealed key differences between the behavior of the membrane systems at the two scales(bench and pilot).It indicated the potential for beneficial reuse of the permeate stream as the pilot-scale experiments ensured high harvesting performance and growth rates of biomass in permeate water that were highly similar to those recorded in the ideal cultivation medium.Finally,different nutrient reintegration protocols were investigated,revealing that both macro-and micro-nutrient levels are critical for the success of the reuse approach.

Implications of de Facto Reuse on Future Regulatory Developments for Beaufort-Jasper Water & Sewer Authority in Okatie, South Carolina, USA

A significant portion of the national water supply can be attributed to de facto or unplanned potable reuse, though the extent of its contribution is difficult to estimate. Fortunately, the contribution of Water Resource Recovery Facility (WRRF) effluent to waters that supply drinking water treatment plants has been documented by some communities. In the United States (US), among the top 25 most impacted drinking water treatment plants by upstream WRRF, 16% of the influent flow to the drinking water treatment plant under average streamflow and up to 100% under low-flow conditions is WRRF effluent. Currently, the full extent of de facto reuse in the US may be much higher because of population growth. The scenario is no different for Beaufort-Jasper Water and Sewer Authority (BJWSA) in South Carolina, US, with contributions to the Savannah River originating from numerous WRRF and other upstream dischargers. South Carolina coastal utilities such as BJSWA are considering direct and indirect potable reuse options, driven by disposal limitations and challenges. Currently, South Carolina does not have a framework, guidelines, or regulations for reuse, but discussions have started among the regulated community. In addition to understanding the extent of de facto reuse, the state will need to develop standards and best practices to enable future adoption of planned potable reuse solutions to water resources challenges. Such guidance should address human health risk management and technical considerations regarding treatment in addition to other factors, including source control, storage, fail-safe operation, monitoring, non-cost factors, and public acceptance. This study conducted a mapping assessment specific to BJWSA, sampled at four locations on Savannah River, and observed that de facto reuse is approximately 4.6% to 5.9% during low-flow months and is within the range generally observed nationwide. When coupled with evidence that planned potable reuse can improve human health and environmental risks, this practice is a meaningful option in the water supply portfolio for many utilities.

Nag Mohashoy Temple Complex,Narayanganj:A Case Study of Adaptive Reuse for Hindu Religious Site

With an emphasis on the religious component of reuse potentiality,this study investigates the crucial nexus between spatial development and the conservation model for religious practice with socio-communal dimensions.Adaptive reuse is a critical tactic for global preservation and revitalization to elevate heritage sites in culturally significant locations but provides contemporary functions to them simultaneously.This study examines the various facets of adaptive reuse concerning the religious cultural heritage of suppressed minorities,stressing its insight and importance including the inherent cultural worth of ancient structures and difficulties through creative solutions to modify the temple with modern purposes.The research methodology approaches through an extensive analysis of the literature and case studies and ends with design interventions.It looks into the socioeconomic advantages of adaptive reuse in religious practice,such as the promotion of pilgrimage tourism,community revitalization,and sustainable development.The possible findings will emphasize the conversation on sustainable heritage management by combining theoretical frameworks with practical discoveries as an architectural project with certain concepts.

Adaptive-Reuse of Historic Industrial Buildings and Sites in China

The paper analyzes the definite place of industrial building in the history of urban development. Due to the development of urban economy and the transition of the traditional industrial structure, many historic cities and towns both at home and abroad have witnessed a large scale "demolition" and abandonment of industrial buildings in urban renewal during last 30 years. Consequently, it has been leading to the discontinuity of urban cultural and historic context. The paper discusses and expounds the clas...

Supporting web services reuse by semantic service component and composition pattern

Due to the fact that the existing web service description methods cannot address the issue of service reuse of various levels of granularity, the concept of service component is introduced, which packages together web services and choreography, and their operations and properties are presented in a consistent and uniform manner. Service components are published externally as normal web services and can thus be employed by webbased applications. In order to improve reusability and testability of service components, the concept of composition pattern is also proposed, which presents the relationships among service components. The relationships and relationship compositions have a rigorous semantic, so that composite components can be validated at the configuration stage. The composition patterns support to integrate service components of various levels of granularity. Experience indicates that the application assembly can effectively be conducted by understanding, selecting, and reusing components easily.

Development of Energy-storing High Pressure Spray Cooling System

The greenhouse has been increasingly used in the breeding industry. However, the high temperature inside the greenhouse in summer has not been effectively addressed. The spray cooling system sprays tiny droplets into the air. Thus the water molecules will be vaporized, absorbing heat and reducing ambient temperature. It is the only cooling method that can be used to cool the uneasily-sealed flexible greenhouse. We developed an energy-storing high pressure spray cooling system. The ordinary water pump is used as the source of high-pressure water. The partial kinetic energy is stored in the energy-storing tubes. When the water pump is stopped, the energy produced by releasing the compressed air can still be used to maintain the spray. And thus the use-cost and systematic wear would be reduced. The cooling system only requires 1 kilowatt hour of power per day. It has been widely used in summer to cool the breeding sheds. After a recent continuous improvement, its functions have been extended to disinfection, removing dust, humidifying and immunizing animals. In addition, it can also be used for the cooling and humidifying of squares, venues and streets in summer. The energy-storing high pressure spray cooling system has a broad application prospect.

AN APPROACH TO C SOFTWARE REUSE BASED ON DATABASE TECHNIQUES

This paper presents a tool for managing, reusing and analysing C software code based on database techniques. The abstract information of entire software code is stored in a program database that is the conceptual scheme of the entire software, whereas the reuse component is a subscheme. Relational algebra can be conveniently used to manage, analyse and reuse C code. In the tool, we can manage, analyse and reuse any components in the program database and rapidly extract source code of any components or construct the program code of a new system. The rule system is introduced in reusing source code.

高中英语阅读教学REUSE模式的构建与应用——以Unit 3 The million pound bank note为例

分析目前高中英语阅读教学存在功利化、模式僵化、碎片化、浅层化、资源利用不充分等典型问题。针对这些问题,构建REUSE模式,即Reviewing(复习)—Exploring(探索)—Unlocking(揭秘)—Sharing(分享)—Evaluating(评价)。以人教版高中《英语》必修3 Unit 3 The million pound bank note为例,探究在高中英语阅读教学中运用REUSE模式的教学流程及应用注意事项。

CASE-BASED PRODUCT CONFIGURATION AND REUSE IN MASS CUSTOMIZATION

The increasing complexity and size of configuration knowledge bases requres the provisionof advanced methods supporting the development of the actual configuration process and design reuse.A new framework to find a feasible and practical product configuration method is presented in masscustomization. The basic idea of the appoach is to integrate case-based reasoning (CBR) with a con-straint satisfaction problem(CSP). The similarity measure between a crisp and range is also given,which is common in case retrieves. Based on the configuration model, a product platform and customerneeds, case adaptation is carried out with the repair-based algorithm. Lastly, the methodology in theelevator configuration design domain is tested.

Treatment of black liquor from the papermaking industry by acidification and reuse

Two different kinds of black liquor from the papermaking industry were treated by acidification and reuse. The experimental parameters and conditions were discussed in detail. The experimental results indicated that the treatment process mentioned in this article is an effective process for the treatment of black liquor from the papermaking industry. By the treatment, the solid materials in black liquor are transferred into two by products and the other components are reused or evaporated. Thus, no wastewater except some condensation water would be discharged in pulping process and the problem of pollution of black liquor would be effectively solved.

QUALITY FUNCTION DEPLOYMENT IN BOTTOM-UP PROCESS FOR DESIGN REUSE

To deal with a bottom up process model for design reuses a specific extended house of quality(EHOQ)is proposed Two kinds of supported functions,basic supported functions and new supported functions,are defined.Two processes to determine two kinds of functions are presented A kind of EHOQ matrix for a company is given and its management steps are studied.

Emerging R&D on membranes and systems for water reuse and desalination

Sustainable production of clean water is a global challenge.While we firmly believe that membrane technologies are one of the most promising solutions to tackle the global water challenges,one must reduce their energy consumption and fouling propensity for broad sustainable applications.In addition,different membranes face various challenges in their specific applications during long-term operations.In this short review,we will summarize the recent progresses in emerging membrane technologies and system integration to advance and sustain water reuse and desalination with discussion on their challenges and perspectives.

Product Model Evolvement and Configuration Knowledge Reuse Method

Configuration knowledge is a dynamic information set which is evolving and enriching on and on. Product model is the instantiation of configuration knowledge and the evolution of configuration knowledge is the essential inherent reason which causes the models dynamic evolvement. In the traditional model evolvement process, the inheriting and reuse of configuration knowledge was always ignored. Aim at solving the above problem, the multistage rhombus evolution mode of configuration knowledge is discussed in this paper. The product model based on configuration knowledge is put forward in different levels to achieve the models dynamic evolvement and automatic upgrading. The evolving configuration knowledge drives the product model to evolve directly according to the rule of up-layer evolvement. Furthermore, a new configuration knowledge reuse and optimization technology is presented to inheriting and reuse the foregone configuration knowledge in the course of model evolvement. At last, the air separation equipment which is related with the project is taken as an example to illuminate that the presented model evolvement and configuration knowledge reuse technology are validity and practical.