Digital Engine Powers New Economy

Internet 已成为推动世界经济的强大动力。在美国Internet经济的总额1996年为155亿美元,1997年增加到390亿美元,预计到2001年将猛增至3500亿美元。所以本文作者认为Internet正在推动美国新经济(new economy)时代的到来,并指出与美国的商业部门相比较,美国的政府和教育部门已在Internet经济中落后。尤其是教育。如在过去5年中美国有博士学位的工程师中的1/4来自国外。

Novel Oxygen Storage Components Promoted Palladium Catalysts for Emission Control in Natural Gas Powered Engines

A three-way catalyst comprised novel oxygen storage components for emission control in natural gas powered engines was prepared. The addition of novel oxygen storage components to the Pd/γ-Al2O3 catalysts resulted in improved activities of the fresh and aged catalyst by lowering the light-off temperature for methane in natural gas engines exhaust.

Novel Technology and Products: Fluidized Bed Incineration and Energy Recovery for Waste Disposal——Developed by the Institute for Thermal Power Engineering, Zhejiang University

The waste referred to includes solid waste and sludge. Solid waste is mainly from urban garbage and industrial waste. Sludge is from water treatment factories, paper mills, chemical factories, pharmaceutical factories, rivers and lakes. The waste and sludge are very harmful to water organisms, human health and drinking water, and directly affect the environment. Sludge and waste also occupy large areas of land. There are several methods to treat waste and sludge, such as burial, chemical treatment and incineration. Incineration is more effective than the

Introduction to School of Environmental Science and Engineering of North China Electric Power University

Along with the fast development of national economy, environmental issues have become more and more prominent. China has promulgated a series of policies of energy-saving and emission-reduction to

Study on Effects of Diesel Engine Cooling System Parameters on Water Temperature

A simulation model for a certain diesel engine cooling system is set up by using GT-COOL. The backwater temperature response in different operating conditions is simulated numerically. The effects of single or multiple system parameters on the water temperature are analyzed. The results show that, changing different single parameters, the time taken for the steady backwater temperature is different, but relatively short;and if multiple parameters are changed, the time will be longer. Referred to the thermal balance test, the simulation results are validated and provide a basis for the intelligent control of the cooling system.

Design of a Transverse-flux Permanent-magnet Linear Generator and Controller for Use with a Free-piston Stirling Engine

Transverse-flux with high efficiency has been applied in Stirling engine and permanent magnet synchronous linear generator system,however it is restricted for large application because of low and complex process.A novel type of cylindrical,non-overlapping,transverse-flux,and permanent-magnet linear motor（TFPLM） is investigated,furthermore,a high power factor and less process complexity structure research is developed.The impact of magnetic leakage factor on power factor is discussed,by using the Finite Element Analysis（FEA） model of stirling engine and TFPLM,an optimization method for electro-magnetic design of TFPLM is proposed based on magnetic leakage factor.The relation between power factor and structure parameter is investigated,and a structure parameter optimization method is proposed taking power factor maximum as a goal.At last,the test bench is founded,starting experimental and generating experimental are performed,and a good agreement of simulation and experimental is achieved.The power factor is improved and the process complexity is decreased.This research provides the instruction to design high-power factor permanent-magnet linear generator.

Study on Effects of Oxydal on Diesel Engine Combustion

Based on the analysis of the high temperature decomposition of oxydal(H2O2)and the combustion of diesel engine,the effects of H2O2 on the improvement of diesel combustion were studied.An oxydal spray system was designed to inject H2O2/water mixture into the manifold.The experiment was carried out on a 1135 diesel engine bench.The results show that H2O2 injection can make the curve of heat release rate move forward and decrease its peak value.The specific fuel consumption is decreased a little,while both NOx and PM emission are obviously reduced.

Test and Analysis for Spraying Ammonia in Diesel Engine

A certain amount of ammonia reducer were directly injected into the 4102BZLQ Diesel engine's combustion chamber when the combustion temperature decreases to 1573-1073K, NOx generated could be reduced to 1.11g/(kW·h). Based on PRF combustion mechanism, NO was tested by using the heavy-duty diesel engine test cycle of ESC thirteen conditions[1], the ammonia spray angle and amount were tested and optimized in different conditions. The test results show that the thermal efficiency of Diesel engine does not decrease while NO exhaust decreases.

Experimental Investigation on Space-dispersed Double-wall Jet Combustion System for DI Diesel Engine

A space-dispersed double-wall jet combustion system was developed by adopting the wall-guiding spray method and the stratification theory.The experimental test was carried out to optimize the structural parameters of the diesel-engine combustion system,including chamber structure,swirl ratio of cylinder head,included angle of jet orifice,number and diameter of jet orifice,fuel injection pressure and timing.The effect of double-wall jet combustion system on combustion and engine performance was tested to obtain the best performance indexes,and the double-wall jet combustion system was compared to the prototype.The results show that NOx is reduced from 712 PPm to 487 PPm at 2 100 r/min,and from 593 PPm to 369 PPm at 3 000 r/min,which are reduced by 31.6% and 37.7%,respectively.The smoke intensity was reduced form 3.67 BSU to 2.1 BSU,and the oil consumption was reduced from 240.5 g/(kW·h) to 225.4 g/(kW·h),which was decreased by 6.3% at low speed.The pressure in the cylinder was obviously reduced from 115 bar to 108 bar,which was reduced by 6%.

Design of Synchronous Drive Mechanism of Opposed-Piston Hydraulic-Output Engine

In order to improve the thermal power conversion capacity of the internal combustion engine,combined with existing opposed-piston two-stroke engine（ OP2S） and hydraulic free piston engine（HFPE）,the integral structure for a newtype of opposed-piston hydraulic-output（ OPHO） engine has been designed,an operating principle has been introduced,the composition of its synchronous drive mechanism has been carefully analyzed,and a mathematical model has been built. In addition,the kinematics models of both the mechanism and the conventional crank-link mechanism have been established by utilizing MATLAB,and the movement rules of the pivotal moving components have been obtained. According to the simulation results,the piston movement of this newtype of opposed-piston hydraulic-output engine reveals a prominent asymmetry compared to the conventional crank-link engine. Under a fixed engine revolving speed,the compression time of the opposedpiston hydraulic-output engine is shortened while the expanding time is lengthened,thus the gas turbulence intensity is strengthened around the top dead center（ TDC） position. Meanwhile,the piston obtains a longer isometric process compared to conventional engines,which could be benefitial to enhance the combustion efficiency.

Most Suitable Power System Stabilizer Selection for the Improvement of Dynamic Stability

A method of enhancing power system stability for a single machine to infinite bus power system is presented. The technique used compromises the effectiveness of Proportional-Integral-Derivative controller （PID）. In order to satisfy the damping characteristics for the proposed power system over a wide range of operating interval, rotational speed, torque angle and terminal voltage signals of the synchronous machine are utilized as control signals of the system. It is well known that these variables have significant effects on damping the generators shaft mechanical oscillations, it＇ll be so easy to validate the most suitable controller as seen from the simulation results.

海上运输的脱碳:土耳其船队的案例研究

Climate change and global warming are among the most severe threats to the global ecosystem,caused by greenhouse gas emissions.Therefore,all industries that cause environmental emissions should collaborate in the struggle against climate change.In this context,the International Maritime Organization(IMO)approved the initial greenhouse gas strategy at the MEPC 72 session in April 2018 to achieve targets for 2050.With this strategy,the IMO aims to create and improve new regulations that can enhance energy efficiency to achieve their short-term,midterm,and long-term goals.In this study,one of the novel terms,energy efficiency existing ship index(EEXI)values,has been calculated for the Turkish fleet to guide the maritime sector.The Turkish fleet in the study refers to the Turkish-owned vessels both sailing with a national or international flag.In accordance with this regulation,the number of Turkish fleets that were identified as either above or below the IMO reference lines has been determined.Additionally,EEXI values have been recalculated using the engine power limitation(EPL)method for ships that exceed the required limits,and the success rate of this method has been estimated.As a result,the application of EPL increased the number of ships below the Phase 2 reference line from 15.6%to 53.1%.To the best of our knowledge,this research,which has been carried out on all Turkish-owned ships,is the first study intended to serve as a guide for other ship owners in the global maritime industry regarding energy efficiency management.

An Innovative Argon/Miller Power Cycle for Internal Combustion Engine: Thermodynamic Analysis of its Efficiency and Power Density

Increasing efficiency and reducing emissions are fundamental approaches to achieving peak carbon emissions and carbon neutrality for the transportation and power industries.The Argon power cycle(APC)is a novel concept for high efficiency and zero emissions.However,APC faces the challenges of severe knock and low power density at high efficiency.To elevate efficiency and power density simultaneously of APC,the Miller cycle is applied and combined with APC.The calculation method is based on a modification of the previous thermodynamic method.The mixture of hydrogen and oxygen is controlled in the stoichiometric ratio.The results indicate that to obtain a thermal conversion efficiency of 70%,in the Otto cycle,the compression ratio and the AR(argon molar ratio in the argon-oxygen mixture)could be 9 and 95%,respectively.In comparison,for the Miller cycle,these two parameters only need to be 7 and 91%.A lower compression ratio can reduce the negative effect of knock,and a reduced AR increases the power density by 66%with the same efficiency.The improvement effect is significant when the expansion-compression ratio is 1.5.Meanwhile,increasing the expansion-compression ratio is more effective in the argon-oxygen mixture than in the nitrogen–oxygen mixture.For the next-generation Argon/Miller power cycle engine,the feasible design to achieve the indicated thermal efficiency of 58.6%should be a compression ratio of 11,an expansion-compression ratio of 1.5,and an AR of 91%.

燃气锅炉的烟气凝结换热

燃气锅炉排放的烟气温度很高且含有一定数量的水蒸汽,在回收烟气余热时,水蒸汽的换热是影响余热回收效率的主要因素之一。利用多孔介质理论对各控制方程进行重新修正;采用标准的k-ε模型和两相界面上凝结换热边界条件,对换热过程进行数值计算。结果表明,有凝结换热发生时,换热能力的计算值与实验值的误差在允许范围内。

The 3rd International Symposium on High Power Laser Science and Engineering

9 to 12,April,2018 Suzhou,China International Symposium series on High Power Laser Science and Engineering,aiming at bringing together worldwide scientists and engineers working on high power laser and physics,is held every two years since 2014.On behalf of the 3rd International Symposium on High Power Laser Science and Engineering(HPLSE2018),