Ignition characteristics and combustion performances of a LO_2/GCH_4 small thrust rocket engine

A 500 N model engine filled with LO2/GCH4 was designed and manufactured.A series of ignition attempts were performed in it by both head spark plug and body spark plug.Results show that the engine can be ignited but the combustion cannot be sustained when head spark plug applied as the plug tip was set in the gaseous low-velocity zone with thin spray.This is mainly because flame from this zone cannot supply enough ignition energy for the whole chamber.However,reliable ignition and stable combustion can be achieved by body spark plug.As the O/F ratio increases from 2.61 to 3.49,chamber pressure increases from 0.474 to 0.925 MPa and combustion efficiency increases from 57.8%to 95.1%.This is determined by the injector configuration,which cannot produce the sufficiently breakup of the liquid oxygen on the low flow rate case.

120-ton Thrust Liquid-Oxygen/Kerosene Engine Passed Acceptance Test

On May 28, the 120-ton thrust liquid-oxygen/kerosene engine developed by the Academy of Aerospace Liquid Propulsion Technology (AALPT) passed the acceptance test organized by China National Space Administration (CNSA). The 120-ton thrust liquid-oxygen/kerosene engine is a non-pollution, non-toxic, high performance and reliable basic pro-

Thermal-structural analysis of regeneratively-cooled thrust chamber wall in reusable LOX/Methane rocket engines

To predict the thermal and structural responses of the thrust chamber wall under cyclic work,a 3-D fluid-structural coupling computational methodology is developed.The thermal and mechanical loads are determined by a validated 3-D finite volume fluid-thermal coupling computational method.With the specified loads,the nonlinear thermal-structural finite element analysis is applied to obtaining the 3-D thermal and structural responses.The Chaboche nonlinear kinematic hardening model calibrated by experimental data is adopted to predict the cyclic plastic behavior of the inner wall.The methodology is further applied to the thrust chamber of LOX/Methane rocket engines.The results show that both the maximum temperature at hot run phase and the maximum circumferential residual strain of the inner wall appear at the convergent part of the chamber.Structural analysis for multiple work cycles reveals that the failure of the inner wall may be controlled by the low-cycle fatigue when the Chaboche model parameter c3= 0,and the damage caused by the thermal-mechanical ratcheting of the inner wall cannot be ignored when c3〉 0.The results of sensitivity analysis indicate that mechanical loads have a strong influence on the strains in the inner wall.

Numerical and experimental investigation of plasma plume deflection with MHD flow control

This paper presents a composite magneto hydrodynamics（MHD） method to control the lowtemperature micro-ionized plasma flow generated by injecting alkali salt into the combustion gas to realize the thrust vector of an aeroengine.The principle of plasma flow with MHD control is analyzed.The feasibility of plasma jet deflection is investigated using numerical simulation with MHD control by loading the User-Defined Function model.A test rig with plasma flow controlled by MHD is established.An alkali salt compound with a low ionization energy is injected into combustion gas to obtain the low-temperature plasma flow.Finally,plasma plume deflection is obtained in different working conditions.The results demonstrate that plasma plume deflection with MHD control can be realized via numerical simulation.A low-temperature plasma flow can be obtained by injecting an alkali metal salt compound with low ionization energy into a combustion gas at 1800–2500 K.The vector angle of plasma plume deflection increases with the increase of gas temperature and the magnetic field intensity.It is feasible to realize the aim of the thrust vector of aeroengine by using MHD to control plasma flow deflection.

Theoretical analysis of effects of boundary layer bleed on scramjet thrust

The effects of boundary layer bleed on the scramjet thrust are studied in the present paper.A theoretical model is developed to evaluate the thrust increment and influencing factors.The thrust increment resulting from the bleed is dominated by the rise in total pressure recovery and bleed mass flow rate.The bleed mass flow rate exerts stronger impact on the engine thrust than the total pressure.According to current bleed design,it is a severe challenge for the engine to enhance its total pressure to maintain the original thrust when there is no bleeding.Furthermore,the initial total pressure recovery,fuel mass addition,combustion efficiency and area ratio of engine exit to entrance can affect the contributions of the bleeding to the thrust increment.The scramjet needs a higher rise in total pressure recovery to counteract the negative effect of bleed mass loss at higher initial total pressure recovery or larger area ratio of engine exit/entrance.More heat release results in a little lower demand on the rise in total pressure recovery for maintaining the scramjet thrust.These results will aid in understanding the fundamental mechanism of bleeding on engine thrust.

Dynamic interaction between clustered liquid propellant rocket engines under their asynchronous start-ups

A nonlinear mathematical model of the low-frequency dynamics of the clustered multi-engine rocket propulsion system has been developed and the computations of the engine transient processes during the start-ups of the four-engine propulsion system with a shared feed system have been made applied.Based on propulsion system start-up modeling the influence of the connectivity of engines in a cluster on the starting characteristics of individual engines is shown.In particular,an advanced nonlinear mathematical model of the pump cavitation phenomena is a distinctive feature of the mathematical model.The computation results showed that the asynchronous engines start-ups during rocket lift-off lead to severely nonlinear engine transients and clustered engine thrust misbalance.The influence of the rocket engines asynchronous start-ups on the clustered feed system transients depends on many factors,mainly on from the clustered feed system low-frequency dynamics,the magnitude of the disturbance and the phase difference between disturbances acting on different branches of the feed system.The deep lingering dips in the flow rate and pressure transients are possible due to the nonlinear dynamic interaction of the engines.In case of great pressure dips at the pump inlet(up to the pressure of saturated vapors during significant periods of start-up time)the cavitation breakdowns of the pumps of one or more engines from the cluster are possible.This can disrupt the operation of the entire propulsion system and leads to the failure of the launch vehicle mission.