Experimental investigation of engineered geopolymer composite for structural strengthening against blast loads

The recent increase in blast/bombing incidents all over the world has pushed the development of effective strengthening approaches to enhance the blast resistance of existing civil infrastructures.Engineered geopolymer composite(EGC)is a promising material featured by eco-friendly,fast-setting and strain-hardening characteristics for emergent strengthening and construction.However,the fiber optimization for preparing EGC and its protective effect on structural elements under blast scenarios are uncertain.In this study,laboratory tests were firstly conducted to evaluate the effects of fiber types on the properties of EGC in terms of workability,dry shrinkage,and mechanical properties in compression,tension and flexure.The experimental results showed that EGC containing PE fiber exhibited suitable workability,acceptable dry shrinkage and superior mechanical properties compared with other types of fibers.After that,a series of field tests were carried out to evaluate the effectiveness of EGC retrofitting layer on the enhancement of blast performance of typical elements.The tests include autoclaved aerated concrete(AAC)masonry walls subjected to vented gas explosion,reinforced AAC panels subjected to TNT explosion and plain concrete slabs subjected to contact explosion.It was found that EGC could effectively enhance the blast resistance of structural elements in different scenarios.For AAC masonry walls and panels,with the existence of EGC,the integrity of specimens could be maintained,and their deflections and damage were significantly reduced.For plain concrete slabs,the EGC overlay could reduce the diameter and depth of the crater and spallation of specimens.

Tensile Strain Capacity Prediction of Engineered Cementitious Composites (ECC) Using Soft Computing Techniques

Plain concrete is strong in compression but brittle in tension,having a low tensile strain capacity that can significantly degrade the long-term performance of concrete structures,even when steel reinforcing is present.In order to address these challenges,short polymer fibers are randomly dispersed in a cement-based matrix to forma highly ductile engineered cementitious composite(ECC).Thismaterial exhibits high ductility under tensile forces,with its tensile strain being several hundred times greater than conventional concrete.Since concrete is inherently weak in tension,the tensile strain capacity(TSC)has become one of the most extensively researched properties.As a result,developing a model to predict the TSC of the ECC and to optimize the mixture proportions becomes challenging.Meanwhile,the effort required for laboratory trial batches to determine the TSC is reduced.To achieve the research objectives,five distinct models,artificial neural network(ANN),nonlinear model(NLR),linear relationship model(LR),multi-logistic model(MLR),and M5P-tree model(M5P),are investigated and employed to predict the TSCof ECCmixtures containing fly ash.Data from115 mixtures are gathered and analyzed to develop a new model.The input variables include mixture proportions,fiber length and diameter,and the time required for curing the various mixtures.The model’s effectiveness is evaluated and verified based on statistical parameters such as R2,mean absolute error(MAE),scatter index(SI),root mean squared error(RMSE),and objective function(OBJ)value.Consequently,the ANN model outperforms the others in predicting the TSC of the ECC,with RMSE,MAE,OBJ,SI,and R2 values of 0.42%,0.3%,0.33%,0.135%,and 0.98,respectively.

Decade Milestone Advancement of Defect-Engineered g-C_(3)N_(4) for Solar Catalytic Applications

Over the past decade, graphitic carbon nitride(g-C_(3)N_(4)) has emerged as a universal photocatalyst toward various sustainable carbo-neutral technologies. Despite solar applications discrepancy, g-C_(3)N_(4) is still confronted with a general fatal issue of insufficient supply of thermodynamically active photocarriers due to its inferior solar harvesting ability and sluggish charge transfer dynamics. Fortunately, this could be significantly alleviated by the “all-in-one” defect engineering strategy, which enables a simultaneous amelioration of both textural uniqueness and intrinsic electronic band structures. To this end, we have summarized an unprecedently comprehensive discussion on defect controls including the vacancy/non-metallic dopant creation with optimized electronic band structure and electronic density, metallic doping with ultraactive coordinated environment(M–N_(x), M–C_(2)N_(2), M–O bonding), functional group grafting with optimized band structure, and promoted crystallinity with extended conjugation π system with weakened interlayered van der Waals interaction. Among them, the defect states induced by various defect types such as N vacancy, P/S/halogen dopants, and cyano group in boosting solar harvesting and accelerating photocarrier transfer have also been emphasized. More importantly, the shallow defect traps identified by femtosecond transient absorption spectra(fs-TAS) have also been highlighted. It is believed that this review would pave the way for future readers with a unique insight into a more precise defective g-C_(3)N_(4) “customization”, motivating more profound thinking and flourishing research outputs on g-C_(3)N_(4)-based photocatalysis.

Bioengineered skin organoids:from development to applications

Signifcant advancements have been made in recent years in the development of highly sophisticated skin organoids.Serving as three-dimensional(3D)models that mimic human skin,these organoids have evolved into complex structures and are increasingly recognized as efective alternatives to traditional culture models and human skin due to their ability to overcome the limitations of two-dimensional(2D)systems and ethical concerns.The inherent plasticity of skin organoids allows for their construction into physiological and pathological models,enabling the study of skin development and dynamic changes.This review provides an overview of the pivotal work in the progression from 3D layered epidermis to cyst-like skin organoids with appendages.Furthermore,it highlights the latest advancements in organoid construction facilitated by state-of-the-art engineering techniques,such as 3D printing and microfuidic devices.The review also summarizes and discusses the diverse applications of skin organoids in developmental biology,disease modelling,regenerative medicine,and personalized medicine,while considering their prospects and limitations.

Utilizing engineered extracellular vesicles as delivery vectors in the management of ischemic stroke:a special outlook on mitochondrial delivery

Ischemic stroke is a secondary cause of mortality worldwide,imposing considerable medical and economic burdens on society.Extracellular vesicles,serving as natural nanocarriers for drug delivery,exhibit excellent biocompatibility in vivo and have significant advantages in the management of ischemic stroke.However,the uncertain distribution and rapid clearance of extracellular vesicles impede their delivery efficiency.By utilizing membrane decoration or by encapsulating therapeutic cargo within extracellular vesicles,their delivery efficacy may be greatly improved.Furthermore,previous studies have indicated that microvesicles,a subset of large-sized extracellular vesicles,can transport mitochondria to neighboring cells,thereby aiding in the restoration of mitochondrial function post-ischemic stroke.Small extracellular vesicles have also demonstrated the capability to transfer mitochondrial components,such as proteins or deoxyribonucleic acid,or their sub-components,for extracellular vesicle-based ischemic stroke therapy.In this review,we undertake a comparative analysis of the isolation techniques employed for extracellular vesicles and present an overview of the current dominant extracellular vesicle modification methodologies.Given the complex facets of treating ischemic stroke,we also delineate various extracellular vesicle modification approaches which are suited to different facets of the treatment process.Moreover,given the burgeoning interest in mitochondrial delivery,we delved into the feasibility and existing research findings on the transportation of mitochondrial fractions or intact mitochondria through small extracellular vesicles and microvesicles to offer a fresh perspective on ischemic stroke therapy.

Boosting overall saline water splitting by constructing a strain-engineered high-entropy electrocatalyst

High-entropy materials(HEMs),which are newly manufactured compounds that contain five or more metal cations,can be a platform with desired properties,including improved electrocatalytic performance owing to the inherent complexity.Here,a strain engineering methodology is proposed to design transition-metal-based HEM by Li manipulation(LiTM)with tunable lattice strain,thus tailoring the electronic structure and boosting electrocatalytic performance.As confirmed by the experiments and calculation results,tensile strain in the LiTM after Li manipulation can optimize the d-band center and increase the electrical conductivity.Accordingly,the asprepared LiTM-25 demonstrates optimized oxygen evolution reaction and hydrogen evolution reaction activity in alkaline saline water,requiring ultralow overpotentials of 265 and 42 mV at 10 mA cm−2,respectively.More strikingly,LiTM-25 retains 94.6%activity after 80 h of a durability test when assembled as an anion-exchange membrane water electrolyzer.Finally,in order to show the general efficacy of strain engineering,we incorporate Li into electrocatalysts with higher entropies as well.

Emerging role of engineered exosomes in nonalcoholic fatty liver disease

Nonalcoholic fatty liver disease(NAFLD)is the most common chronic liver dis-ease worldwide.NAFLD comprises a continuum of liver abnormalities from non-alcoholic fatty liver to nonalcoholic steatohepatitis,and can even lead to cirrhosis and liver cancer.However,a well-established treatment for NAFLD has yet to be identified.Exosomes have become an ideal drug delivery tool because of their high transmissibility,low immunogenicity,easy accessibility and targeting.Exosomes with specific modifications,known as engineered exosomes,have the potential to treat a variety of diseases.Here,we review the treatment of NAFLD with engineered exosomes and the potential use of exosomes as biomarkers and therapeutic targets for NAFLD.

3D printing of functional bioengineered constructs for neural regeneration: a review

Three-dimensional(3D)printing technology has opened a new paradigm to controllably and reproducibly fabricate bioengineered neural constructs for potential applications in repairing injured nervous tissues or producing in vitro nervous tissue models.However,the complexity of nervous tissues poses great challenges to 3D-printed bioengineered analogues,which should possess diverse architectural/chemical/electrical functionalities to resemble the native growth microenvironments for functional neural regeneration.In this work,we provide a state-of-the-art review of the latest development of 3D printing for bioengineered neural constructs.Various 3D printing techniques for neural tissue-engineered scaffolds or living cell-laden constructs are summarized and compared in terms of their unique advantages.We highlight the advanced strategies by integrating topographical,biochemical and electroactive cues inside 3D-printed neural constructs to replicate in vivo-like microenvironment for functional neural regeneration.The typical applications of 3D-printed bioengineered constructs for in vivo repair of injured nervous tissues,bio-electronics interfacing with native nervous system,neural-on-chips as well as brain-like tissue models are demonstrated.The challenges and future outlook associated with 3D printing for functional neural constructs in various categories are discussed.

Seed-Specific Expression of Apolipoprotein A-IMilano Dimer in Engineered Rice Lines

Apolipoprotein A-IMilano(ApoA-IM)has been shown to significantly reduce coronary atherosclerotic plaques.However,the preparation of cost-effective pharmaceutical formulations of ApoA-IM is limited by the high cost and difficulty of purifying the protein and producing the highly effective dimeric form.The aim of this study was to create an expression cassette that specifically drives the expression of dimeric ApoA-IM in the protein bodies of rice seeds.The ApoA-IM protein under control of the 13 kDa prolamin promoter is expressed exclusively in its dimeric form within the seeds,and immunocytochemical and immunogold analyses confirmed its expression in different caryopsis tissue such as seed coat,aleurone cell and endosperm,particularly in amyloplast and storage vacuoles.A plant-based ApoA-IM production system offered numerous advantages over current production systems,including the direct production of the most therapeutically effective dimeric ApoA-IM forms,long-term protein storage in seeds,and ease of protein production by simply growing plants.Therefore,seeds had the potential to serve as a costeffective source of therapeutic ApoA-IM.

Engineered exosomes-based theranostic strategy for tumor metastasis and recurrence

Metastasis-associated processes are the predominant instigator of fatalities linked to cancer,wherein the pivotal role of circulating tumor cells lies in the resurgence of malignant growth.In recent epochs,exosomes,constituents of the extracellular vesicle cohort,have garnered attention within the field of tumor theranostics owing to their inherent attributes encompassing biocompatibility,modifiability,payload capacity,stability,and therapeutic suitability.Nonetheless,the rudimentary functionalities and limited efficacy of unmodified exosomes curtail their prospective utility.In an effort to surmount these shortcomings,intricate methodologies amalgamating nanotechnology with genetic manipulation,chemotherapy,immunotherapy,and optical intervention present themselves as enhanced avenues to surveil and intercede in tumor metastasis and relapse.This review delves into the manifold techniques currently employed to engineer exosomes,with a specific focus on elucidating the interplay between exosomes and the metastatic cascade,alongside the implementation of tailored exosomes in abating tumor metastasis and recurrence.This review not only advances comprehension of the evolving landscape within this domain but also steers the trajectory of forthcoming investigations.

3D-printed engineered bacteria-laden gelatin/sodium alginate composite hydrogels for biological detection of ionizing radiation

Nuclear safety is a global growing concern,where ionizing radiation(IR)is a major injury factor resulting in serious damage to organisms.The detection of IR is usually conducted with physical dosimeters;however,biological IR detection methods are deficient.Here,a living composite hydrogel consisting of engineered bacteria and gelatin/sodium alginate was 3D-printed for the biological detection of IR.Three strains of PrecA::egfp gene circuit-containing engineered Escherichia coli were constructed with IR-dependent fluorescence,and the DH5αstrain was finally selected due to its highest radiation response and fluorescence.Engineered bacteria were loaded in a series of gelatin/sodium alginate matrix hydrogels with different rheology,3D printability and bacterial applicability.A high-gelatin-content hydrogel containing 10%gelatin/1.25%sodium alginatewas optimal.The optimal living composite hydrogelwas 3D-printedwith the special bioink,which reported significant green fluorescence underγ-ray radiation.The living composite hydrogel provides a biological strategy for the detection of environmental ionizing radiation.

Effect of Curing Age on Tensile Properties of Fly Ash Based Engineered Geopolymer Composites(FA-EGC)by Uniaxial Tensile Test and Ultrasonic Pulse Velocity Method

Tensile properties of fly ash based engineered geopolymer composites(FA-EGC)at different curing ages were studied by uniaxial tensile test and ultrasonic pulse velocity(UPV)methods,which included uniaxial tensile properties,the correlation between ultrasonic pulse velocity and tensile properties,and characteristic parameters of microcracks.The experimental results show that obvious strain hardening behavior can be found in FA-EGC at different curing ages.With the increase of curing age,the tensile strength increases,the tensile strain decreases and the toughness becomes worse.The UPV of FA-EGC increases with curing age,and a strong correlation can be found between tensile strength and UPV.With the increase of curing age,the average crack width of FA-EGC decreases and the total number of cracks increases.This is because the strength of geopolymer increases fast at early age,thus the later strength development of FA-EGC tend to be stable.At the same time,the bond strength between fiber and matrix,and the friction of fiber/matrix interface continue to increase with curing age,thus the bridging effect of fiber is gradually strengthened.In conclusion,the increase of curing age is beneficial to the development of tensile properties of FA-EGC.

Defect-engineered two-dimensional transition metal dichalcogenides towards electrocatalytic hydrogen evolution reaction

Recently,two-dimensional transition metal dichalcogenides(TMDs)demonstrated their great potential as cost-effective catalysts in hydrogen evolution reaction.Herein,we systematically summarize the existing defect engineering strategies,including intrinsic defects(atomic vacancy and active edges)and extrinsic defects(metal doping,nonmetal doping,and hybrid doping),which have been utilized to obtain advanced TMD-based electrocatalysts.Based on theoretical simulations and experimental results,the electronic structure,intermediate adsorption/desorption energies and possible catalytic mechanisms are thoroughly discussed.Particular emphasis is given to the intrinsic relationship between various types of defects and electrocatalytic properties.Furthermore,current opportunities and challenges for mechanical investigations and applications of defective TMD-based catalysts are presented.The aim herein is to reveal the respective properties of various defective TMD catalysts and provide valuable insights for fabricating high-efficiency TMD-based electrocatalysts.

Experimental and numerical study on flexural behaviors of steel reinforced engineered cementitious composite beams

To investigate the flexural behaviors of steel reinforced engineered cementitious composite （ECC） beams, the behaviors of the steel reinforced ECC beam and the conventional steel reinforced concrete beam subjected to flexural load are experimentally compared. The experimental results show that the flexural strength and ductility of the steel reinforced ECC beam are 24.8% and 187.67% times larger than those of the steel reinforced concrete beam, and the substitution of concrete with ECC can significantly delay the propagation of cracks. Additionally, a simplified constitutive model of the ECC material is used to simulate the flexural behaviors of beams by the finite element analysis （FEA）. The results show a good agreement between the simulation and test results. The crack width of the steel reinforced ECC beam can be limited to 0.4 mm under the service load conditions. The application of ductile ECC can significantly increase the flexural performance in terms of flexural strength, deformation capacity and ductility of the beams.

Development of engineered cementitious composites with local ingredients

In order to reduce the cost of high performance polyvinyl alcohol（PVA） fiber reinforced cementitious material（called engineered cementitious composites,ECC）,a ductile ECC material is developed using domestic PVA fibers along with other local ingredients,such as fly ash,cement and sand.In addition to the economic analysis of ECC,the four-point bending test and the optical microscope are employed to investigate the deflection capacity of ECC,its crack width and the occurrence of the self-healing phenomenon.The experimental results suggest that ECC made with domestic ingredients exhibits larger deformability and the average crack width is controlled around 60 μm.Furthermore,the self-healing behavior is observed in cracks of the specimens after cycles of wet and dry curing.The economic analysis shows that the cost of ECC can be greatly reduced via employing domestic PVA fibers.It is,therefore,feasible to produce low cost ECC material employing domestic PVA fibers,while simultaneously retaining high material ductility.

Bacterial Single-cell Whole Genome Sequencing Overhauled by Engineered Polymerase

Sequencing the genome of single bacterial cells has long been technically difficult due to the seemingly incorrigible bias in the gene amplification stage of the process,making it hard to produce a high-coverage genome sequence from precisely just one bacterial cell.A new process developed by researchers at the Single-Cell Center,Qingdao Institute of Bioenergy and Bioprocess Technology(QIBEBT)of the Chinese Academy of Sciences(CAS),however,greatly reduces that bias,opening up whole new vistas of single-cell research.

Impact Properties of Engineered Cementitious Composites with High Volume Fly Ash Using SHPB Test

The split Hopkinson pressure bar （SHPB） testing with diameter 40 mm was used to investigate the dynamic mechanical properties of engineered cementitious composites （ECCs） with different fly ash content. The basic properties including deformation, energy absorption capacity, strain-stress relationship and failure patterns were discussed. The ECCs showed strain-rate dependency and kept better plastic flow during impact process compared with reactive powder concrete （RPC） and concrete, but the critical compressive strength was lower than that of RPC and concrete. The bridging effect of PVA fiber and addition of fly ash can significantly improve the deformation and energy absorption capacities of ECCs. With the increase of fly ash content in ECCs, the static and dynamic compressive strength lowered and the dynamic increase factor enhanced. Therefore, to meet different engineering needs, the content of fly ash can be an important index to control the static and dynamic mechanical properties of ECCs.

An update–tissue engineered nerve grafts for the repair of peripheral nerve injuries

Peripheral nerve injuries（PNI） are caused by a range of etiologies and result in a broad spectrum of disability. While nerve autografts are the current gold standard for the reconstruction of extensive nerve damage, the limited supply of autologous nerve and complications associated with harvesting nerve from a second surgical site has driven groups from multiple disciplines, including biomedical engineering, neurosurgery, plastic surgery, and orthopedic surgery, to develop a suitable or superior alternative to autografting. Over the last couple of decades, various types of scaffolds, such as acellular nerve grafts（ANGs）, nerve guidance conduits, and non-nervous tissues, have been filled with Schwann cells, stem cells, and/or neurotrophic factors to develop tissue engineered nerve grafts（TENGs）. Although these have shown promising effects on peripheral nerve regeneration in experimental models, the autograft has remained the gold standard for large nerve gaps. This review provides a discussion of recent advances in the development of TENGs and their efficacy in experimental models. Specifically, TENGs have been enhanced via incorporation of genetically engineered cells, methods to improve stem cell survival and differentiation, optimized delivery of neurotrophic factors via drug delivery systems（DDS）, co-administration of platelet-rich plasma（PRP）, and pretreatment with chondroitinase ABC（Ch-ABC）. Other notable advancements include conduits that have been bioengineered to mimic native nerve structure via cell-derived extracellular matrix（ECM） deposition, and the development of transplantable living nervous tissue constructs from rat and human dorsal root ganglia（DRG） neurons. Grafts composed of non-nervous tissues, such as vein, artery, and muscle, will be briefly discussed.

Safety of engineered structures against blast vibrations： A case study

Blasting used for rock excavation is associated with ground vibrations having potential damage to surrounding structures.The extent of damage produced in a structure depends largely on ground motion characteristics,dynamic characteristics of structure and the type of geological strata on which it is founded.The safety of surrounding structures against blast vibrations is a cause of concern.However,use of a systematic approach to rock blasting helps to complete the excavation safely in time without endangering the safety of surrounding structures.Various steps are commonly adopted at construction sites to ensure safety of engineered structures against blast vibrations,e.g.adopting a suitable safe vibration level,developing site-specific attenuation relation,estimating safe charges for different distances,designing blasting pattern,and monitoring vibrations during actual blasting.The paper describes the details of studies conducted for ensuring safety of an 85 years old masonry dam and green concrete of varying ages during excavation of about 30,000 m;of hard rock in Maharashtra,India.The studies helped to complete the rock excavation safely in time and the safety of the dam was ensured by monitoring blast vibrations during actual rock excavation.

Nonphytate Phosphorus Requirement and Efficacy of a Genetically Engineered Yeast Phytase for Yellow Broilers at 22- to 42-d-Old Age

An experiment was conducted to investigate the requirement of nonphytate phosphorus（nPP） and efficacy of a genetically engineered yeast phytase（PHY A） for Lingnan yellow broilers from 22-to 42-d-old age.A total of 1 320 1-d-old male chicks were randomly divided into 11 dietary treatment groups,which consisted of 4 replicate floor pens with 30 birds per pen.The control group（treatment 1） was fed with basal diet of nPP 0.08% without dicalcium phosphate or phytase supplementation.Dietary levels of nPP were 0.16,0.24,0.32,0.40,0.48,and 0.56%,respectively,for treatments 2 to 7,through addition of dicalcium phosphate（chemistry grade） to the basal diet.Diets of treatments 8 to 11 were supplemented with PHY A at 200,400 and 600 U kg-1,a commercial phytase product（PHY B） at 400 U kg-1 level,respectively.The birds in 0.32-0.56% nPP groups gained more than those of the other groups（P0.05）.The nPP supplementation significantly improved feed intake（P0.05）.The feed gain ratio was significantly decreased by 0.40% nPP diet compared to the control birds（P0.05）.The level of 0.48% nPP was required for optimum tibia development.The additions of PHY A at 400 and 600 U kg-1 level and PHY B all significantly improved ADG（P0.05）,ADFI（P0.05）,and dry defatted tibia weight（P0.05）.Similarly,the percentage of tibia ash was increased by 600 U kg-1 PHY A supplementation（P0.05）.The requirement of nPP for maximal ADG and highest percentage tibia ash both was 0.40%.The phosphorus equivalency value of PHY A was estimated as 685 U kg-1 for male yellow broilers of 22-to 42-d-old age.