The Sichuan-Tibet transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on dif...The Sichuan-Tibet transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on different engineering structures,their combined effect remains unclear.This research employed multiple physical model tests to investigate the dynamic response of various engineering structures,including tunnels,bridges,and embankments,under the simultaneous influence of cumulative earthquakes and stick-slip misalignment of an active fault.The prototype selected for this study was the Kanding No.2 tunnel,which crosses the Yunongxi fault zone within the Sichuan-Tibet transportation corridor.The results demonstrated that the tunnel,bridge,and embankment exhibited amplification in response to the input seismic wave,with the amplification effect gradually decreasing as the input peak ground acceleration(PGA)increased.The PGAs of different engineering structures were weakened by the fault rupture zone.Nevertheless,the misalignment of the active fault may decrease the overall stiffness of the engineering structure,leading to more severe damage,with a small contribution from seismic vibration.Additionally,the seismic vibration effect might be enlarged with the height of the engineering structure,and the tunnel is supposed to have a smaller PGA and lower dynamic earth pressure compared to bridges and embankments in strong earthquake zones crossing active faults.The findings contribute valuable insights for evaluating the dynamic response of various engineering structures crossing an active fault and provide an experimental reference for secure engineering design in the challenging conditions of the Sichuan-Tibet transportation corridor.展开更多
At least 13 active fault zones have developed in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,and there have been undergone 17 MS≥7.0 earthquakes,the largest earthquake is 1950 Chayu MS 8.5 ea...At least 13 active fault zones have developed in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,and there have been undergone 17 MS≥7.0 earthquakes,the largest earthquake is 1950 Chayu MS 8.5 earthquake,which has very strong seismic activity.Therefore,carrying out engineering construction in the Sichuan-Tibet transport corridor is a huge challenge for geological technological personnel.To determining the spatial geometric distribution,activity of active faults and geological safety risk in the Sichuan-Tibet transport corridor.Based on remote sensing images,ground surveys,and chronological tests,as well as the deep geophysical and current GPS data,we investigated the geometry,segmentation,and paleoearthquake history of five major active fault zones in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,namely the Xianshuihe,Litang,Batang,Jiali-Chayu and Lulang-Yigong.The five major fault zones are all Holocene active faults,which contain strike-slip components as well as thrust or normal fault components,and contain multiple branch faults.The Selaha-Kangding segment of the Xianshuihe fault zone,the Maoyaba and Litang segment of the Litang fault zone,the middle segment(Yigong-Tongmai-Bomi)of Jiali-Chayu fault zone and Lulang-Yigong fault zone have the risk of experiencing strong earthquakes in the future,with a high possibility of the occurrence of MS≥7.0 earthquakes.The Jinsha River and the Palong-Zangbu River,which is a high-risk area for geological hazard chain risk in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor.Construction and safe operation Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,need strengthen analysis the current crustal deformation,stress distribution and fault activity patterns,clarify active faults relationship with large earthquakes,and determine the potential maximum magnitude,epicenters,and risk range.This study provides basic data for understanding the activity,seismicity,and tectonic deformation patterns of the regional faults in the Sichuan-Tibet transport corridor.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.41825018,41977248,42207219)the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(Grant No.2019QZKK0904)。
文摘The Sichuan-Tibet transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on different engineering structures,their combined effect remains unclear.This research employed multiple physical model tests to investigate the dynamic response of various engineering structures,including tunnels,bridges,and embankments,under the simultaneous influence of cumulative earthquakes and stick-slip misalignment of an active fault.The prototype selected for this study was the Kanding No.2 tunnel,which crosses the Yunongxi fault zone within the Sichuan-Tibet transportation corridor.The results demonstrated that the tunnel,bridge,and embankment exhibited amplification in response to the input seismic wave,with the amplification effect gradually decreasing as the input peak ground acceleration(PGA)increased.The PGAs of different engineering structures were weakened by the fault rupture zone.Nevertheless,the misalignment of the active fault may decrease the overall stiffness of the engineering structure,leading to more severe damage,with a small contribution from seismic vibration.Additionally,the seismic vibration effect might be enlarged with the height of the engineering structure,and the tunnel is supposed to have a smaller PGA and lower dynamic earth pressure compared to bridges and embankments in strong earthquake zones crossing active faults.The findings contribute valuable insights for evaluating the dynamic response of various engineering structures crossing an active fault and provide an experimental reference for secure engineering design in the challenging conditions of the Sichuan-Tibet transportation corridor.
基金supported by the National Natural Science Foundation of China(42177184)the Balance Research Funds of the Chinese Academy of Geological Sciences(60)the China Geological Survey(DD20221816)。
文摘At least 13 active fault zones have developed in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,and there have been undergone 17 MS≥7.0 earthquakes,the largest earthquake is 1950 Chayu MS 8.5 earthquake,which has very strong seismic activity.Therefore,carrying out engineering construction in the Sichuan-Tibet transport corridor is a huge challenge for geological technological personnel.To determining the spatial geometric distribution,activity of active faults and geological safety risk in the Sichuan-Tibet transport corridor.Based on remote sensing images,ground surveys,and chronological tests,as well as the deep geophysical and current GPS data,we investigated the geometry,segmentation,and paleoearthquake history of five major active fault zones in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,namely the Xianshuihe,Litang,Batang,Jiali-Chayu and Lulang-Yigong.The five major fault zones are all Holocene active faults,which contain strike-slip components as well as thrust or normal fault components,and contain multiple branch faults.The Selaha-Kangding segment of the Xianshuihe fault zone,the Maoyaba and Litang segment of the Litang fault zone,the middle segment(Yigong-Tongmai-Bomi)of Jiali-Chayu fault zone and Lulang-Yigong fault zone have the risk of experiencing strong earthquakes in the future,with a high possibility of the occurrence of MS≥7.0 earthquakes.The Jinsha River and the Palong-Zangbu River,which is a high-risk area for geological hazard chain risk in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor.Construction and safe operation Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,need strengthen analysis the current crustal deformation,stress distribution and fault activity patterns,clarify active faults relationship with large earthquakes,and determine the potential maximum magnitude,epicenters,and risk range.This study provides basic data for understanding the activity,seismicity,and tectonic deformation patterns of the regional faults in the Sichuan-Tibet transport corridor.
