A novel and effective approach was developed to synthesize monodisperse hollow molecularly imprinted polymers （MHMIPs） with unfunctionalized SiO2 spheres in a mixture of toluene and CH3CN. The factors that affected ...A novel and effective approach was developed to synthesize monodisperse hollow molecularly imprinted polymers （MHMIPs） with unfunctionalized SiO2 spheres in a mixture of toluene and CH3CN. The factors that affected the synthesis of MHMIPs were systematically investigated. It was determined that a suitable ratio of toluene to CH3CN and the use of a functional monomer that can generate double H-bonding interactions were the critical factors to obtain MHMIPs with high uniformity and rnonodispersion. The obtained MHMIPs exhibited a fast adsorption rate and high adsorption capacity （270 μmol/g） for bisphenol A. As the shell thickness increased from 90 nm to 130 nm, the binding capacity of the imprinted shells decreased gradually. The relative selectivity coefficients of MHMIPs for tetra-brornobisphenol A （TBBPA）, phenol and p-tert-butylphenol （PTBP） were calculated as 1.53, 1.83 and 1.90, respectively. These findings indicate that MHMIPs have good adsorption performances and suggest applications in the selective removal or sensitive analysis of bisphenol A.展开更多
Molecularly imprinted polymers selective for L-aspartic acid (LAA) have been prepared using the carboxy-betaine polymer bearing zwitterionic centres along the backbone. LAA is well known to promote good me-tabolism, t...Molecularly imprinted polymers selective for L-aspartic acid (LAA) have been prepared using the carboxy-betaine polymer bearing zwitterionic centres along the backbone. LAA is well known to promote good me-tabolism, treat fatigue and depression along with its significance in accurate age estimation in the field of forensic science and is an important constituent of ‘aspartame’, the low calorie sweetener. In order to study the intermolecular interactions in the prepolymerization mixture between the monomer and the template (LAA)/non-template (DAA), a computational approach was developed. It was based on the binding energy of the complex between the template and functional monomer. The results demonstrate that electrostatic in-teractions primarily guide the imprinting protocol. The MIP was able to selectively and specifically take up LAA from aqueous solution, human blood serum and certain pharmaceutical samples quantitatively. Hence, a facile, specific and selective technique to detect the amino acid, LAA in the presence of various interfer-rants, in different kinds of matrices is presented.展开更多
Molecularly imprinted polymer, exhibiting considerable enantioselectivity for L-mandelic acid, was prepared using metal coordination-chelation interaction. By evaluating the recognition characteristics in the chromato...Molecularly imprinted polymer, exhibiting considerable enantioselectivity for L-mandelic acid, was prepared using metal coordination-chelation interaction. By evaluating the recognition characteristics in the chromatographic mode, the recognition interactions were proposed: specific and nonspecific metal coordination-chelation interaction and hydrophobic interaction were responsible for substrate binding on metal-complexing imprinted polymer; while the selective recognition only came from specific metal coordination-chelation interaction and specific hydrophobic interaction.展开更多
Using nickel（II） acetate.-2,2＇-dipyridyl complex as template and N-vinyl-2-pyrrolidone （NVP） as coordinate functional monomer,.a new kind of metal-compiexing template molecularly impnnted polymer （MIP） was prep...Using nickel（II） acetate.-2,2＇-dipyridyl complex as template and N-vinyl-2-pyrrolidone （NVP） as coordinate functional monomer,.a new kind of metal-compiexing template molecularly impnnted polymer （MIP） was prepared..The results of equilibri.um binding experiments in. aqueous solution showed that the MIP had higher＇binding capacity for nickel（ II ）-2,2＇-dipyridyl than the non-imprinted polymer with the same chemical composition. Theinfluences of metal ions and pHof solution on the recognition performance of MIP were investigated. The bindingcharacteristics of MIP were evaluated by the Scatchard analysis with one-site and two-site binding equations, respectively. The results on substrate selectivity of imprinted polymer revealed that MIP had better binding affinityfor template among thetested compounds.展开更多
A novel synthetic N-(9-fluorenyl methoxy carbonyl)-L-Cysteine (Fmoc-Cys(SH)-OH) receptor was pre- pared by co-polymerizing (9-fluorenyl methoxy carbonyl)-S-(1-propene-2-thiol)-L-Cysteine (Fmoc-Cys(SCH2CHCH2)-OH) and a...A novel synthetic N-(9-fluorenyl methoxy carbonyl)-L-Cysteine (Fmoc-Cys(SH)-OH) receptor was pre- pared by co-polymerizing (9-fluorenyl methoxy carbonyl)-S-(1-propene-2-thiol)-L-Cysteine (Fmoc-Cys(SCH2CHCH2)-OH) and a non-imprinted polymer prepared from 1-propene-1-thiol photo-chemically 15 h at room temperature and additional 3 h thermally at 80℃. Subsequently, disulfides were reduced with lithium aluminum hydride (LiAlH4) from imprinted polymers. The imprinted polymers selectively recognized Fmoc-Cys(SH)-OH with high binding constants in aqueous and protic solvents by thiol-disulfide exchange reactions. In order to estimate the covalent rebinding, particles were further extracted and disulfides reduced were estimated with the non-covalent recognized and covalently bounded analytes. From rebinding studies that were conducted, we observed that proved polymer particles could be reproducible and contain constant binding strengths and recognition properties. Furthermore, we proved that short incubation periods resulted in fast and efficient thiol-disulfide interchange reactions.展开更多
Molecularly imprinted polymers(MIPs) are artificial, template-made receptors with the ability to recognize and to specially bind the target molecule. The advantage of stability of the polymer, ease of the preparation ...Molecularly imprinted polymers(MIPs) are artificial, template-made receptors with the ability to recognize and to specially bind the target molecule. The advantage of stability of the polymer, ease of the preparation and low cost of these MIPs have led to their assessment as substitutes for antibodies or enzymes in chemical sensors, catalysis and separations. Although creating a MIPs against small molecules is straightforward now, imprinting of large structures, such as proteins and other biomacromolecules, is still a challenge. The major problem associated with the imprinting of such large structures lies on the restricted mobility of them within highly cross-linked polymer networks and the poor efficiency in rebinding. In this paper, we present a technique for the preparation of polymer nanowires with the protein molecule imprinted and binding sites on surface. These surface imprinting nanowires exhibit highly selective recognition for a variety of template proteins, including albumin, hemoglobin and cytochrome c. Since the protein imprinted sites are located on, or close to, the surface, these imprinted nanowires have a good site accessibility towards the target protein molecules. Furthermore, the large surface area of the nanowires results in larger protein molecules binding capacity of the imprinted nanowires compared to previously report surface imprinting MIPs.展开更多
基金supported by the Common Wealth Scientific Foundation for Industry of Chinese Inspection and Quarantine (No.201210071)the Ministry of National Science and Technology of China
文摘A novel and effective approach was developed to synthesize monodisperse hollow molecularly imprinted polymers （MHMIPs） with unfunctionalized SiO2 spheres in a mixture of toluene and CH3CN. The factors that affected the synthesis of MHMIPs were systematically investigated. It was determined that a suitable ratio of toluene to CH3CN and the use of a functional monomer that can generate double H-bonding interactions were the critical factors to obtain MHMIPs with high uniformity and rnonodispersion. The obtained MHMIPs exhibited a fast adsorption rate and high adsorption capacity （270 μmol/g） for bisphenol A. As the shell thickness increased from 90 nm to 130 nm, the binding capacity of the imprinted shells decreased gradually. The relative selectivity coefficients of MHMIPs for tetra-brornobisphenol A （TBBPA）, phenol and p-tert-butylphenol （PTBP） were calculated as 1.53, 1.83 and 1.90, respectively. These findings indicate that MHMIPs have good adsorption performances and suggest applications in the selective removal or sensitive analysis of bisphenol A.
文摘Molecularly imprinted polymers selective for L-aspartic acid (LAA) have been prepared using the carboxy-betaine polymer bearing zwitterionic centres along the backbone. LAA is well known to promote good me-tabolism, treat fatigue and depression along with its significance in accurate age estimation in the field of forensic science and is an important constituent of ‘aspartame’, the low calorie sweetener. In order to study the intermolecular interactions in the prepolymerization mixture between the monomer and the template (LAA)/non-template (DAA), a computational approach was developed. It was based on the binding energy of the complex between the template and functional monomer. The results demonstrate that electrostatic in-teractions primarily guide the imprinting protocol. The MIP was able to selectively and specifically take up LAA from aqueous solution, human blood serum and certain pharmaceutical samples quantitatively. Hence, a facile, specific and selective technique to detect the amino acid, LAA in the presence of various interfer-rants, in different kinds of matrices is presented.
文摘Molecularly imprinted polymer, exhibiting considerable enantioselectivity for L-mandelic acid, was prepared using metal coordination-chelation interaction. By evaluating the recognition characteristics in the chromatographic mode, the recognition interactions were proposed: specific and nonspecific metal coordination-chelation interaction and hydrophobic interaction were responsible for substrate binding on metal-complexing imprinted polymer; while the selective recognition only came from specific metal coordination-chelation interaction and specific hydrophobic interaction.
基金Supported by the Special Funds for Major State Basic Research Program of China(973 Project,No.2003CB615705).
文摘Using nickel（II） acetate.-2,2＇-dipyridyl complex as template and N-vinyl-2-pyrrolidone （NVP） as coordinate functional monomer,.a new kind of metal-compiexing template molecularly impnnted polymer （MIP） was prepared..The results of equilibri.um binding experiments in. aqueous solution showed that the MIP had higher＇binding capacity for nickel（ II ）-2,2＇-dipyridyl than the non-imprinted polymer with the same chemical composition. Theinfluences of metal ions and pHof solution on the recognition performance of MIP were investigated. The bindingcharacteristics of MIP were evaluated by the Scatchard analysis with one-site and two-site binding equations, respectively. The results on substrate selectivity of imprinted polymer revealed that MIP had better binding affinityfor template among thetested compounds.
文摘A novel synthetic N-(9-fluorenyl methoxy carbonyl)-L-Cysteine (Fmoc-Cys(SH)-OH) receptor was pre- pared by co-polymerizing (9-fluorenyl methoxy carbonyl)-S-(1-propene-2-thiol)-L-Cysteine (Fmoc-Cys(SCH2CHCH2)-OH) and a non-imprinted polymer prepared from 1-propene-1-thiol photo-chemically 15 h at room temperature and additional 3 h thermally at 80℃. Subsequently, disulfides were reduced with lithium aluminum hydride (LiAlH4) from imprinted polymers. The imprinted polymers selectively recognized Fmoc-Cys(SH)-OH with high binding constants in aqueous and protic solvents by thiol-disulfide exchange reactions. In order to estimate the covalent rebinding, particles were further extracted and disulfides reduced were estimated with the non-covalent recognized and covalently bounded analytes. From rebinding studies that were conducted, we observed that proved polymer particles could be reproducible and contain constant binding strengths and recognition properties. Furthermore, we proved that short incubation periods resulted in fast and efficient thiol-disulfide interchange reactions.
文摘Molecularly imprinted polymers(MIPs) are artificial, template-made receptors with the ability to recognize and to specially bind the target molecule. The advantage of stability of the polymer, ease of the preparation and low cost of these MIPs have led to their assessment as substitutes for antibodies or enzymes in chemical sensors, catalysis and separations. Although creating a MIPs against small molecules is straightforward now, imprinting of large structures, such as proteins and other biomacromolecules, is still a challenge. The major problem associated with the imprinting of such large structures lies on the restricted mobility of them within highly cross-linked polymer networks and the poor efficiency in rebinding. In this paper, we present a technique for the preparation of polymer nanowires with the protein molecule imprinted and binding sites on surface. These surface imprinting nanowires exhibit highly selective recognition for a variety of template proteins, including albumin, hemoglobin and cytochrome c. Since the protein imprinted sites are located on, or close to, the surface, these imprinted nanowires have a good site accessibility towards the target protein molecules. Furthermore, the large surface area of the nanowires results in larger protein molecules binding capacity of the imprinted nanowires compared to previously report surface imprinting MIPs.
