Formation of entrance and exit defects in coarse pitch orbital drilling(CPOD)of carbon fiber reinforced plastic(CFRP)plates was investigated.Deep observation on entrance and exit morphology shows tear and burr are typ...Formation of entrance and exit defects in coarse pitch orbital drilling(CPOD)of carbon fiber reinforced plastic(CFRP)plates was investigated.Deep observation on entrance and exit morphology shows tear and burr are typical defects.Meanwhile,tear is more obvious than burr,and more entrance tears emerge than exit tears.As one of the major causes of entrance and exit defects in CPOD,cutting forces were substaintially studied by contrast experiments.Then,the effect of cutting parameters on entrance and exit tear was qualitatively analyzed through a single factor test.Experiment results indicate that the variation of rotation speed has little influence on entrance and exit tear.Increasing tangential feed per tooth can enlarge entrance tear,but bring little effect on exit tear.By increasing axial feed pitch,the hole entrance and exit show severe tear.When revolution radius grows bigger and bigger,entrance and exit tear firstly decreases,and then increases.Finally,the models of tear and delamination during CPOD of CFRP were established,the formation mechanisms of entrance and exit defects were revealed,and the control strategies were accordingly put forward.展开更多
Sensing of keyhole shape and size is important for controlling of plasma arc welding process. In this study, a synchronous vision system is developed by using two CCD cameras to observe the keyhole entrance and exit s...Sensing of keyhole shape and size is important for controlling of plasma arc welding process. In this study, a synchronous vision system is developed by using two CCD cameras to observe the keyhole entrance and exit simultaneously. Experiments are conducted on stainless steel workpiece, Whole keyhole exit image and part of keyhole entrance image are captured synchronously under different welding conditions. Image processing and calibration algorithms are proposed. The boundary and front point of the keyhole entrance and exit are extracted respectively. The effects of welding current and welding speed on ,front point of keyhole entrance and exit are analyzed. Compared to the front point of the keyhole entrance, the position of the front point of the keyhole exit is better to reflect the variation of the welding parameters.展开更多
The study was conducted to estimate flock dynamics of western lowland Arab goat and to assess their contribution to income of smallholder farmers in Kurmuk and Assosa districts, western Ethiopia. Flocks of 30 househol...The study was conducted to estimate flock dynamics of western lowland Arab goat and to assess their contribution to income of smallholder farmers in Kurmuk and Assosa districts, western Ethiopia. Flocks of 30 households were monitored for a period of 12 months in 2016. Data were analyzed using the general linear model procedure of SAS and two-way interaction effects were fitted in the model and retained when found significant in the preliminary analysis. The study result indicates that total entrances for all flock were significantly (p < 0.05) higher in dry and hot-cool seasons than wet season. Most of the entrance was kids born in hot-cool season (January) (4.0 ± 0.42) and hot-dry season (May) (5.4 ± 1.09) for Assosa and Kumruk study sites, respectively. Kid mortality constituted the greater part of outflow. High kid mortality was occurred during July, February, January, and September. Most of the sell of castrated goats were occurred in September and April for both small and large flocks targeting holidays celebrated during this months. Male goat owners had significantly lower goat production potential (GPP) value than female (0.47 ± 0.02 vs. 0.52 ± 0.02). The GPP was lower in small flock than in large flock (0.48 ± 0.02 vs. 0.51 ± 0.02). Higher GPP was recorded in the months of January, February, and March for both large and small flocks. The off-take was higher (P < 0.05) in Assosa (0.06 ± 0.01) than Kumruk (0.02 ± 0.02) district. The average goat production efficiency (GPE) was higher (P < 0.05) in Assosa large (193.23 ± 20.0) and small flocks (93.44 ± 17.3) than Kumruk large (84.71 ± 15.6) and small flocks (33.33 ± 26.3).The production efficiency recorded was not comparable to the potential that the farmers had to sell goats or consume goats’ meat and milk. The lower goat production potential observed for small flocks implies that high mortality rates severely restrict receiving higher benefits from goat. Therefore, in order to optimize the productivity of goats flock dynamics, developing health intervention strategies that target reduction of kids’ mortality is imperative.展开更多
Highway tunnel entrances have a high rate of expressway traffic accidents.In this paper,the reasons for the high incidence of traffic accidents at highway tunnel entrances are analyzed in detail,and corresponding solu...Highway tunnel entrances have a high rate of expressway traffic accidents.In this paper,the reasons for the high incidence of traffic accidents at highway tunnel entrances are analyzed in detail,and corresponding solutions are proposed,hoping to provide some reference to relevant parties.展开更多
POI是“Point of Interest”的缩写。每个POI包含四方面信息,名称、类别、坐标、分类,文章拟通过对地面空间和地下空间两个维度的用地构成、建筑类型与使用功能的研究分析,尝试探索基于POI的旧城核心区地铁站出入口设置的量化设计方法...POI是“Point of Interest”的缩写。每个POI包含四方面信息,名称、类别、坐标、分类,文章拟通过对地面空间和地下空间两个维度的用地构成、建筑类型与使用功能的研究分析,尝试探索基于POI的旧城核心区地铁站出入口设置的量化设计方法。文章通过文献研读、类比分析等研究手段,对国内外地铁站出入口设置进行了梳理与分析,弥补了旧城核心区地铁站出入口量化设置研究的理论空白,为国内类似项目提供了一定的设计研究素材。展开更多
互通式立交承担着不同方向交通流的流向转换功能,是道路交通网络的重要节点。目前高密度立交在城市道路网络中已愈发常见,高密度立交之间的间距比普通立交更小,车辆交织更为密集,驾驶人需要在更短的时间内进行分合流驾驶操作。为探究立...互通式立交承担着不同方向交通流的流向转换功能,是道路交通网络的重要节点。目前高密度立交在城市道路网络中已愈发常见,高密度立交之间的间距比普通立交更小,车辆交织更为密集,驾驶人需要在更短的时间内进行分合流驾驶操作。为探究立交间距对驾驶人精神负荷的影响与高密度立交出入口区段的驾驶人精神负荷统计特性,在重庆市内环快速路上选择了1段包含4座连续立交的路段作为实验对象,其中3座立交为高密度立交。通过车载仪器采集47名驾驶人在实车实验过程中的心电数据,对在高密度立交出入口区段与普通间距立交出入口区段的驾驶人心率变异性时域和频域指标进行差异性分析,得到了驾驶人在高密度立交与普通间距立交出入口区段的精神负荷分布特征。研究结果表明:驾驶人在经过普通间距立交出入口区段和高密度立交出入口区段时的心率变异性时域指标不存在显著性差异,频域指标心率变异性的低、高频功率的比值(ratio of low-frequency to high-frequency,LF/HF)存在显著性差异,频域指标LF/HF可作为评价驾驶人精神负荷在立交出入口区段的主要指标;驾驶人在经过高密度立交入口区段时,频域指标LF/HF比经过普通间距立交入口区段时显著增加,立交间距不足会增加驾驶人在立交入口区段的精神负荷;驾驶人在经过普通间距立交出口区段时的心率变异性频域指标LF/HF比经过高密度立交出口区段时显著增加,即驾驶人通过普通间距立交出口区段的精神负荷更大;对于高密度立交群,驾驶人在入口区段的精神负荷水平要略高于出口区段。展开更多
要为明确高密度互通立交行驶环境下,主线车流量对出入口区段驾驶人精神负荷间的影响,在重庆市内环快速路高密度互通立交群进行自然驾驶实车试验,使用Physiolab生理检测仪连续采集驾驶人在行驶过程中的心电数据,用于统计各驾驶人的心率...要为明确高密度互通立交行驶环境下,主线车流量对出入口区段驾驶人精神负荷间的影响,在重庆市内环快速路高密度互通立交群进行自然驾驶实车试验,使用Physiolab生理检测仪连续采集驾驶人在行驶过程中的心电数据,用于统计各驾驶人的心率指标变化情况。本次试验基于主成分分析法选择心率变异率指标RMSSD(root mean square of successive differences)、LFnorm(low frequency norm)、HFnorm(high frequency norm)、LF(low frequency)/HF(high frequency)以及心率突变率指标HRMR(heat ratemutation rate)作为驾驶人精神负荷的评价指标,记为主成分F 1和主成分F 2,并建立评价模型。结果表明:驾驶人在小净距立交出入口区段行驶时,立交主线车流量的大小会影响驾驶人的精神负荷;当驾驶人驶入立交主线时,三次模型对入口段车流量与主成分F 2的拟合效果最好,呈开口向上的三次曲线,曲线谷值点出现在2级流量水平处,模型显著;当驾驶人驶出立交主线时,一次线性模型对出口段车流量与主成分F 1的拟合效果最好,模型显著。展开更多
基金supported in part by the Major Project of the Ministry of Science and Technology of China(No.2012ZX04003-031)the Innovation Project of Jiangsu Province(No.2016-05)
文摘Formation of entrance and exit defects in coarse pitch orbital drilling(CPOD)of carbon fiber reinforced plastic(CFRP)plates was investigated.Deep observation on entrance and exit morphology shows tear and burr are typical defects.Meanwhile,tear is more obvious than burr,and more entrance tears emerge than exit tears.As one of the major causes of entrance and exit defects in CPOD,cutting forces were substaintially studied by contrast experiments.Then,the effect of cutting parameters on entrance and exit tear was qualitatively analyzed through a single factor test.Experiment results indicate that the variation of rotation speed has little influence on entrance and exit tear.Increasing tangential feed per tooth can enlarge entrance tear,but bring little effect on exit tear.By increasing axial feed pitch,the hole entrance and exit show severe tear.When revolution radius grows bigger and bigger,entrance and exit tear firstly decreases,and then increases.Finally,the models of tear and delamination during CPOD of CFRP were established,the formation mechanisms of entrance and exit defects were revealed,and the control strategies were accordingly put forward.
基金The authors are grateful to the financial support for this research from the Natural Science Foundation of Shandong Province under grant No.ZR2011EEM013 and Independent Innovation Foundation of Shandong University under grant No.2010TS108
文摘Sensing of keyhole shape and size is important for controlling of plasma arc welding process. In this study, a synchronous vision system is developed by using two CCD cameras to observe the keyhole entrance and exit simultaneously. Experiments are conducted on stainless steel workpiece, Whole keyhole exit image and part of keyhole entrance image are captured synchronously under different welding conditions. Image processing and calibration algorithms are proposed. The boundary and front point of the keyhole entrance and exit are extracted respectively. The effects of welding current and welding speed on ,front point of keyhole entrance and exit are analyzed. Compared to the front point of the keyhole entrance, the position of the front point of the keyhole exit is better to reflect the variation of the welding parameters.
文摘The study was conducted to estimate flock dynamics of western lowland Arab goat and to assess their contribution to income of smallholder farmers in Kurmuk and Assosa districts, western Ethiopia. Flocks of 30 households were monitored for a period of 12 months in 2016. Data were analyzed using the general linear model procedure of SAS and two-way interaction effects were fitted in the model and retained when found significant in the preliminary analysis. The study result indicates that total entrances for all flock were significantly (p < 0.05) higher in dry and hot-cool seasons than wet season. Most of the entrance was kids born in hot-cool season (January) (4.0 ± 0.42) and hot-dry season (May) (5.4 ± 1.09) for Assosa and Kumruk study sites, respectively. Kid mortality constituted the greater part of outflow. High kid mortality was occurred during July, February, January, and September. Most of the sell of castrated goats were occurred in September and April for both small and large flocks targeting holidays celebrated during this months. Male goat owners had significantly lower goat production potential (GPP) value than female (0.47 ± 0.02 vs. 0.52 ± 0.02). The GPP was lower in small flock than in large flock (0.48 ± 0.02 vs. 0.51 ± 0.02). Higher GPP was recorded in the months of January, February, and March for both large and small flocks. The off-take was higher (P < 0.05) in Assosa (0.06 ± 0.01) than Kumruk (0.02 ± 0.02) district. The average goat production efficiency (GPE) was higher (P < 0.05) in Assosa large (193.23 ± 20.0) and small flocks (93.44 ± 17.3) than Kumruk large (84.71 ± 15.6) and small flocks (33.33 ± 26.3).The production efficiency recorded was not comparable to the potential that the farmers had to sell goats or consume goats’ meat and milk. The lower goat production potential observed for small flocks implies that high mortality rates severely restrict receiving higher benefits from goat. Therefore, in order to optimize the productivity of goats flock dynamics, developing health intervention strategies that target reduction of kids’ mortality is imperative.
文摘Highway tunnel entrances have a high rate of expressway traffic accidents.In this paper,the reasons for the high incidence of traffic accidents at highway tunnel entrances are analyzed in detail,and corresponding solutions are proposed,hoping to provide some reference to relevant parties.
文摘POI是“Point of Interest”的缩写。每个POI包含四方面信息,名称、类别、坐标、分类,文章拟通过对地面空间和地下空间两个维度的用地构成、建筑类型与使用功能的研究分析,尝试探索基于POI的旧城核心区地铁站出入口设置的量化设计方法。文章通过文献研读、类比分析等研究手段,对国内外地铁站出入口设置进行了梳理与分析,弥补了旧城核心区地铁站出入口量化设置研究的理论空白,为国内类似项目提供了一定的设计研究素材。
文摘互通式立交承担着不同方向交通流的流向转换功能,是道路交通网络的重要节点。目前高密度立交在城市道路网络中已愈发常见,高密度立交之间的间距比普通立交更小,车辆交织更为密集,驾驶人需要在更短的时间内进行分合流驾驶操作。为探究立交间距对驾驶人精神负荷的影响与高密度立交出入口区段的驾驶人精神负荷统计特性,在重庆市内环快速路上选择了1段包含4座连续立交的路段作为实验对象,其中3座立交为高密度立交。通过车载仪器采集47名驾驶人在实车实验过程中的心电数据,对在高密度立交出入口区段与普通间距立交出入口区段的驾驶人心率变异性时域和频域指标进行差异性分析,得到了驾驶人在高密度立交与普通间距立交出入口区段的精神负荷分布特征。研究结果表明:驾驶人在经过普通间距立交出入口区段和高密度立交出入口区段时的心率变异性时域指标不存在显著性差异,频域指标心率变异性的低、高频功率的比值(ratio of low-frequency to high-frequency,LF/HF)存在显著性差异,频域指标LF/HF可作为评价驾驶人精神负荷在立交出入口区段的主要指标;驾驶人在经过高密度立交入口区段时,频域指标LF/HF比经过普通间距立交入口区段时显著增加,立交间距不足会增加驾驶人在立交入口区段的精神负荷;驾驶人在经过普通间距立交出口区段时的心率变异性频域指标LF/HF比经过高密度立交出口区段时显著增加,即驾驶人通过普通间距立交出口区段的精神负荷更大;对于高密度立交群,驾驶人在入口区段的精神负荷水平要略高于出口区段。
文摘要为明确高密度互通立交行驶环境下,主线车流量对出入口区段驾驶人精神负荷间的影响,在重庆市内环快速路高密度互通立交群进行自然驾驶实车试验,使用Physiolab生理检测仪连续采集驾驶人在行驶过程中的心电数据,用于统计各驾驶人的心率指标变化情况。本次试验基于主成分分析法选择心率变异率指标RMSSD(root mean square of successive differences)、LFnorm(low frequency norm)、HFnorm(high frequency norm)、LF(low frequency)/HF(high frequency)以及心率突变率指标HRMR(heat ratemutation rate)作为驾驶人精神负荷的评价指标,记为主成分F 1和主成分F 2,并建立评价模型。结果表明:驾驶人在小净距立交出入口区段行驶时,立交主线车流量的大小会影响驾驶人的精神负荷;当驾驶人驶入立交主线时,三次模型对入口段车流量与主成分F 2的拟合效果最好,呈开口向上的三次曲线,曲线谷值点出现在2级流量水平处,模型显著;当驾驶人驶出立交主线时,一次线性模型对出口段车流量与主成分F 1的拟合效果最好,模型显著。
