Taking the output power, thermal efficiency, and thermo-economic performance as the optimization objectives, we optimize the operation parameters of a thermodynamic system with combined endoreversible Carnot heat engi...Taking the output power, thermal efficiency, and thermo-economic performance as the optimization objectives, we optimize the operation parameters of a thermodynamic system with combined endoreversible Carnot heat engines in this paper. The applicabilities of the entropy generation minimization and entransy theory to the optimizations are discussed. For the discussed cases, only the entransy loss coefficient is always agreeable to the optimization of thermal efficiency. The applicabilities of the other discussed concepts to the optimizations are conditional. Different concepts and principles are needed for different optimization objectives, and the optimization principles have their application preconditions. When the preconditions are not satisfied, the principles may be not applicable.展开更多
Combining with entransy theory, constructal designs of the X-shaped vascular networks(XSVNs) are implemented with fixed total tube volumes of the XSVNs. The entransy dissipation rates(EDRs) of the XSVNs are minimized,...Combining with entransy theory, constructal designs of the X-shaped vascular networks(XSVNs) are implemented with fixed total tube volumes of the XSVNs. The entransy dissipation rates(EDRs) of the XSVNs are minimized, and the optimal constructs of the XSVNs are derived. Comparison of the optimal constructs of the XSVNs with two optimization objectives(EDR minimization and entropy generation rate(EGR) minimization) is conducted. It is found that when the dimensionless mass flow rate(DMFR) is small, the optimal diameter ratio of the elemental XSVN derived by EDR minimization is different from that derived by EGR minimization. For the multilevel XSVN, when the DMFR is 100, compared the XSVN with the corresponding H-shaped vascular network(HSVN), the dimensionless EDRs of the elemental, second and fourth order XSVNs are reduced by 26.39%, 15.34% and 9.81%, respectively. Compared with the entransy dissipation number(EDN) of the second order XSVN before angle optimization, the EDN after optimization is reduced by 26.15%, which illustrates that it is significant to conduct angle optimization of the XSVN. Entransy theory is applied into the constructal design of the vasculature with heat transfer and fluid flow in this paper, which provides new directions for the vasculature designs.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.51376101)the Science Fund for Creative Research Groups,China(Grant No.51321002)
文摘Taking the output power, thermal efficiency, and thermo-economic performance as the optimization objectives, we optimize the operation parameters of a thermodynamic system with combined endoreversible Carnot heat engines in this paper. The applicabilities of the entropy generation minimization and entransy theory to the optimizations are discussed. For the discussed cases, only the entransy loss coefficient is always agreeable to the optimization of thermal efficiency. The applicabilities of the other discussed concepts to the optimizations are conditional. Different concepts and principles are needed for different optimization objectives, and the optimization principles have their application preconditions. When the preconditions are not satisfied, the principles may be not applicable.
基金supported by the National Natural Science Foundation of China(Grant Nos.51506220,51579244)the Natural Science Foundation of Hubei Province(Grant No.2016CFB504)the Independent Project of Naval University of Engineering(Grant No.425317Q017)
文摘Combining with entransy theory, constructal designs of the X-shaped vascular networks(XSVNs) are implemented with fixed total tube volumes of the XSVNs. The entransy dissipation rates(EDRs) of the XSVNs are minimized, and the optimal constructs of the XSVNs are derived. Comparison of the optimal constructs of the XSVNs with two optimization objectives(EDR minimization and entropy generation rate(EGR) minimization) is conducted. It is found that when the dimensionless mass flow rate(DMFR) is small, the optimal diameter ratio of the elemental XSVN derived by EDR minimization is different from that derived by EGR minimization. For the multilevel XSVN, when the DMFR is 100, compared the XSVN with the corresponding H-shaped vascular network(HSVN), the dimensionless EDRs of the elemental, second and fourth order XSVNs are reduced by 26.39%, 15.34% and 9.81%, respectively. Compared with the entransy dissipation number(EDN) of the second order XSVN before angle optimization, the EDN after optimization is reduced by 26.15%, which illustrates that it is significant to conduct angle optimization of the XSVN. Entransy theory is applied into the constructal design of the vasculature with heat transfer and fluid flow in this paper, which provides new directions for the vasculature designs.