The environmental analysis and site selection of mussel and large yellow croaker aquaculture areas based on high resolution remote sensing

Mussel aquaculture and large yellow croaker aquaculture areas and their environmental characteristics in Zhoushan were analyzed using satellite data and in-situ surveys.A new two-step remote sensing method was proposed and applied to determine the basic environmental characteristics of the best mussel and large yellow croaker aquaculture areas.This methodology includes the first step of extraction of the location distribution and the second step of the extraction of internal environmental factors.The fishery ranching index(FRI1,FRI2)was established to extract the mussel and the large yellow croaker aquaculture area in Zhoushan,using Gaofen-1(GF-1)and Gaofen-6(GF-6)satellite data with a special resolution of 2 m.In the second step,the environmental factors such as sea surface temperature(SST),chlorophyll a(Chl-a)concentration,current and tide,suspended sediment concentration(SSC)in mussel aquaculture area and large yellow croaker aquaculture area were extracted and analyzed in detail.The results show the following three points.(1)For the extraction of the mussel aquaculture area,FRI1 and FRI2 are complementary,and the combination of FRI1 and FRI2 is suitable to extract the mussel aquaculture area.As for the large yellow croaker aquaculture area extraction,FRI2 is suitable.(2)Mussel aquaculture and the large yellow croaker aquaculture area in Zhoushan are mainly located on the side near the islands that are away from the eastern open waters.The water environment factor template suitable for mussel and large yellow croaker aquaculture was determined.(3)This two-step remote sensing method can be used for the preliminary screening of potential site selection for the mussels and large yellow croaker aquaculture area in the future.the fishery ranching index(FRI1,FRI2)in this paper can be applied to extract the mussel and large yellow croaker aquaculture areas in coastal waters around the world.

Optimizing Sustainability:Exergoenvironmental Analysis of a Multi-Effect Distillation with Thermal Vapor Compression System for Seawater Desalination

Seawater desalination stands as an increasingly indispensable solution to address global water scarcity issues.This study conducts a thorough exergoenvironmental analysis of a multi-effect distillation with thermal vapor compression(MED-TVC)system,a highly promising desalination technology.The MED-TVC system presents an energy-efficient approach to desalination by harnessing waste heat sources and incorporating thermal vapor compression.The primary objective of this research is to assess the system’s thermodynamic efficiency and environmental impact,considering both energy and exergy aspects.The investigation delves into the intricacies of energy and exergy losses within the MED-TVC process,providing a holistic understanding of its performance.By scrutinizing the distribution and sources of exergy destruction,the study identifies specific areas for enhancement in the system’s design and operation,thereby elevating its overall sustainability.Moreover,the exergoenvironmental analysis quantifies the environmental impact,offering vital insights into the sustainability of seawater desalination technologies.The results underscore the significance of every component in the MED-TVC system for its exergoenvironmental performance.Notably,the thermal vapor compressor emerges as pivotal due to its direct impact on energy efficiency,exergy losses,and the environmental footprint of the process.Consequently,optimizing this particular component becomes imperative for achieving a more sustainable and efficient desalination system.

Analysis of the Factors That Cause Environmental Degradation of Lake Santa Maria Tasi Tolu Dili Timor-Leste

This research aims to understand more closely the damage to the lake environment and the factors that cause pollution in Lake Santa Maria are the first factor of increasing urbanization, the use of the land around the lake as a place to live, the absence of maximum control from the local government this case, the Dili municipal authority. Types of solid waste consist of iron from car accidents, motorcycles, used building materials, plastic, used drink bottles and clothes, mosquito nets, food scraps from household waste, as well as old fishing nets from residents. In addition, household waste such as bath and bath, dishwashing, detergents, and waste from tempeh and tofu factories, including burnt oil from cars and motorcycles, are thrown into the lake. Municipal waste management is based on environmental standards to determine the quality of waste management in Dili Municipality. It is possible to identify the composition of waste and waste, as well as predict its environmental impact. Human (Anthropic) factors Domestic Liquid Waste, Domestic Solid Waste: Composed of organic and inorganic waste. Synthetic Waste, Disposal of Used Oil, Disposal of Domestic Animal Waste, Shallow Drains and Septic Tanks, Mountain Garbage, Garbage Thrown by Visitors, Natural Factors, Climate change, Prolonged drought, Low rainfall, El Niño and La Niña factors, Wind speed, Heat (high daily temperature pressure), Greater water evaporation, Dry wind. The occurrence of contamination necessarily implies an ecological imbalance. The impact introduced by residual compounds and waste that may be associated with the toxicity.

Environmental input-output model and its analysis with a focus on the solid waste management sectors

An environmental input output model (EIOM) was introduced to the regional solid waste management sectors, which can reflect the direct and indirect relations between the environment and the regional economy development. Some details about how to use the EIOM was discussed. The EIOM was applied to the Changsha City in China. The example results indicate that much useful information related to the environment and the regional economy development can be gained from the solution of the EIOM. Thus, the EIOM can be used as a useful tool for the sustainable development planning including the solid waste management sectors.

Grey Relational Analysis between Chlorophyll a and Environmental Factors in ShaHu Lake

[Objective] The aim was to explore effects of environmental factors on the content of Chlorophyll a in ShaHu Lake.[Method] Based on the data in Shahu Lake from November in 2007 to September in 2008,the relationship between chlorophyll a and environmental factors like water temperature,pH,secchi-depth （SD）,total nitrogen,total phosphorus and potassium permanganate index was studied by grey relational analysis method.[Result] The main environmental factors affecting the content of Chlorophyll a in ShaHu Lake were in order of water temperature potassium permanganate index 〉total nitrogen 〉pH〉 total phosphorus 〉SD.[Conclusion] The research provides reference for the control of eutrophication and the reasonable development and utilization of Shahu Lake.

Input-Output Analysis of the Impact of Environmental Regulation on Chinese Industries

In this paper, we attempted to calculate the impact of environmental regulation on the international competitiveness of China＇s industries. Calculations are based on the input-output model that incorporates pollution control costs. We took enterprises ＇pollution control costs as the substitute variable for environmental regulation and price changes to measure the impact on international competitiveness for all sectors. Our studies reported three findings. First, price rises caused by pollution control costs were not more than 4 per cent in the manufacturing and trade sectors in 2007. Second, although the charging rate on pollutant discharge has become increasingly higher since 2003, the resultant price rise is only around O. 5 per cent across all sectors. Third, the impact brought about by increasingly stronger environmental regulation is limited and the resultant price rise does not exceed 2 per cent. Thesefindings indicate that the impact of environmental regulation on China＇s trade sectors is affordable. Therefore, it is needless to worry that environmental regulation will weaken the international competitiveness of Chinese products.

Plights and Outlet:Environmental Problem Analysis of Agricultural Eco-tourism

As agricultural eco-tourism development played a vital role in promoting rural economic and social development and constructing new harmonious countryside,the paper had analyzed environmental problem produced during its development,pointed out that blind development of agricultural eco-tourism had seriously destroyed resources and ecological environment and that tourist infrastructure construction and urbanization had ruined rural unique natural landscape.In view of current situation of environment,it also studied reasons causing environmental disruption,which lied in insufficient guidance and support of government,deficient scientific development planning and management system,and poor environmental consciousness of tourist operators and tourists.On this basis,it summarized that agricultural eco-tourism development should follow principles of sustainable development,synchronization between development and protection,and coordination between tourism development and environmental protection.It concluded proper ways to develop agricultural eco-tourism,and emphasized that it should draw up scientific and reasonable development planning,enhance government's macro-administration,establish and perfect ecological compensation mechanism,and strive to cultivate people's environmental awareness.

Application of near-infrared spectroscopy for fast germplasm analysis and classification in multi-environment using intact-seed peanut(Arachis hypogaea L.)

Peanut is a worldwide oilseed crop and the need to assess germplasm in a non-destructive manner is important for seed nutritional breeding.In this study,Near Infrared Spectroscopy(NIRS)was applied to rapidly assess germplasm variability from whole seed of 699 samples,field-collected and assembled in four genetic and environmentbased sets:one set of 300 varieties of a core-collection and three sets of 133 genotypes of an interspecific population,evaluated in three environments in a large spatial scale of two countries,Mbalmayo and Bafia in Cameroon and Nioro in Senegal,under rainfed conditions.NIR elemental spectra were gathered on six subsets of seeds of each sample,after three rotation scans,with a spectral resolution of 16 cm-1over the spectral range of867 nm to 2530 nm.Spectra were then processed by principal component analysis(PCA)coupled with Partial least squares-discriminant analysis(PLS-DA).As results,a huge variability was found between varieties and genotypes for all NIR wavelength within and between environments.The magnitude of genetic variation was particularly observed at 11 relevant wavelengths such as 1723 nm,usually related to oil content and fatty acid composition.PCA yielded the most chemical attributes in three significant PCs(i.e.,eigenvalues>10),which together captured 93%of the total variation,revealing genetic and environment structure of varieties and genotypes into four clusters,corresponding to the four samples sets.The pattern of genetic variability of the interspecific population covers,remarkably half of spectrum of the core-collection,turning out to be the largest.Interestingly,a PLS-DA model was developed and a strong accuracy of 99.6%was achieved for the four sets,aiming to classify each seed sample according to environment origin.The confusion matrix achieved for the two sets of Bafia and Nioro showed 100%of instances classified correctly with 100%at both sensitivity and specificity,confirming that their seed quality was different from each other and all other samples.Overall,NIRS chemometrics is useful to assess and distinguish seeds from different environments and highlights the value of the interspecific population and core-collection,as a source of nutritional diversity,to support the breeding efforts.

Harnessing the Market Potential of the Bamboo Industry in Central Luzon, Philippines: An Analysis of the Internal and External Environment

The bamboo industry in Central Luzon holds significant promise for economic development and environmental sustainability. This study aims to analyze the internal and external factors influencing the bamboo industry in the region through SWOT and PESTLE analyses. Based on a focus group discussion involving key industry players, the study explores the industry’s strengths, weaknesses, opportunities, and threats, as well as political, economic, social, technological, legal, and environmental factors. Findings reveal the importance of comprehensive strategies that address political stability, economic growth, consumer awareness, technological advancement, legal compliance, and environmental sustainability. Recommendations include capacity-building for production and marketing, the establishment of bamboo treatment facilities, and advocacy for supportive policies. By addressing these factors, the bamboo industry in Central Luzon can realize its potential for socio-economic development and environmental stewardship.

Frame Work of Data Envelopment Analysis—A Model to Evaluate the Environmental Efficiency of China'S Industrial Sectors

Objective To evaluate the environmental and technical efficiencies of China＇s industrial sectors and provide appropriate advice for policy makers in the context of rapid economic growth and concurrent serious environmental damages caused by industrial pollutants. Methods A data of envelopment analysis （DEA） framework crediting both reduction of pollution outputs and expansion of good outputs was designed as a model to compute environmental efficiency of China＇s regional industrial systems. Results As shown by the geometric mean of environmental efficiency, if other inputs were made constant and good outputs were not to be improved, the air pollution outputs would have the potential to be decreased by about 60% in the whole China. Conclusion Both environmental and technical efficiencies have the potential to be greatly improved in China, which may provide some advice for policy-makers.

Numerical Analysis of Deteriorated Sub-sea Pipelines under Environmental Loads

The significant point is the bidirectional interaction technique in FSI analysis while investigating subsea corrosion effect. By this way, pipe environment is accurately modelled and fluid effects are also considered. The effect of external corrosion defects on structural behaviour of a pipeline is studied by creating a nonlinear numerical model based on the finite element method according to ABAQUS analysis program. Corrosion losses of sections are obtained from experimental results and applied to the model. Numerical model is formed by a span of sub-sea pipeline that is subjected to environmental loads. Seismic and wind-generated irregular wave loads are considered as environmental loads. Irregular wave is represented with equivalent eight regular waves via FFT. The pipe is modelled according to two different types which are non-corroded（intact） and corroded（deteriorated） to demonstrate corrosion effects on it. The visible type of corrosion in marine environment is named ‘pitting＇ corrosion, in which the material loss is locally interpenetrated over the surface. By considering this situation, the corroded and non-corroded pipes are modelled as 3D solid elements. The main point is revealing how the subsea corrosion affects the structural behaviour of pipelines on the basis of implementation of experimental results to a model structure due to changes of stresses and displacement.

Ranking environmental projects model based on multicriteria decision-making and the weight sensitivity analysis

With the fast growth of Chinese economic, more and more capital will be invested in environmental projects. How to select the environmental investment projects （alternatives） for obtaining the best environmental quality and economic benefits is an important problem for the decision makers. The purpose of this paper is to develop a decision-making model to rank a finite number of alternatives with several and sometimes conflicting criteria. A model for ranking the projects of municipal sewage treatment plants is proposed by using exports＇ information and the data of the real projects. And, the ranking result is given based on the PROMETHEE method. Furthermore, by means of the concept of the weight stability intervals （WSI）, the sensitivity of the ranking results to the size of criteria values and the change of weights value of criteria are discussed. The result shows that some criteria, such as “proportion of benefit to project cost”, will influence the ranking result of alternatives very strong while others not. The influence are not only from the value of criterion but also from the changing the weight of criterion. So, some criteria such as “proportion of benefit to project cost” are key critera for ranking the projects. Decision makers must be cautious to them.

Using structured systems analysis to design an integrated system for transport planning and environmental analysis

This paper applies Yourdon's (1989) structured systems analysis techniques to transport planning, and the environmental analysis of transport plans. It is usual for planners to treat these activities as separate processes or 'systems'. Six serious shortcomings are identified in prevailing approaches to accounting for the environmental impacts of transport plans. The application of systems analysis has elucidated opportunities for overcoming these problems by integrating the two processes. The paper highlights the benefits of using these methods to direct research into, and development of, an integrated transport planning- environmental analysis system. Techniques applied are data flow diagrams, a Venn diagram and an entity-relationship diagram. Significant potential exists for integration within a geographic information system(GIS), although adoption of integrated methods by transport planners is likely to be incremental. Research confirms the usefulness of systems analysis in guiding the development of a GIS application to accommodate integrated transport planning and environmental analysis. Systems analysis also facilitates more careful and effective design of the databases underlying GIS analysis.

Analysis of environmental factors about cerebral stroke

In this paper, the disease of cerebral stroke is studied mainly. According to the basic information of the patient, Linear fitting method is applied to calculate between the number of sick and age by using MATLAB software. According to data of pressure, temperature and humidity, nondimensionalizing by normalization method, linear regressions are analysed between the number of the patient and pressure, temperature, humidity. According to the important feature and the key indicators of cerebral stroke, high-risk groups are proposed to the early warning and intervene.

Analysis of hydrogeolgical characteristics and water environmental impact pathway of typical shale gas exploration and development zones in Sichuan Basin, China

Studying the influence of shale gas exploration and development on groundwater environment is the basis of guiding water environment protection in the process of shale gas exploration and development.Groundwater environmental pollution is concealed,complex and persistent.Once it is difficult to control the pollution,the current commercial shale gas development zones in Sichuan Basin that are mostly located in karst areas and highly sensitive to groundwater will be vulnerable to the impact of shale gas exploration and development.Based on the hydrogeological conditions of shale gas exploration and development area and combined with engineering analysis of exploration and development,various risk pathways that may affect the groundwater environment during process of shale gas exploration,mining well construction,mining operations and other stages were identified in this paper.Some existing risk pathways were proved by verification of typical areas and should not be ignored.Based on the actual situation of typical areas,the countermeasures of groundwater environmental protection in the process of shale gas exploration and development in karst areas were discussed.It is believed that the groundwater environment can be better protected by strengthening administration,research and application of new technologies,precise design,hydrogeological conditions,and research and feedback of groundwater environmental protection.

Environmental Analysis with 2D Transition-Metal Dichalcogenide-Based Field-Effect Transistors

Field-effect transistors(FETs)present highly sensitive,rapid,and in situ detection capability in chemical and biological analysis.Recently,two-dimensional(2D)transition-metal dichalcogenides(TMDCs)attract significant attention as FET channel due to their unique structures and outstanding properties.With the booming of studies on TMDC FETs,we aim to give a timely review on TMDCbased FET sensors for environmental analysis in different media.First,theoretical basics on TMDC and FET sensor are introduced.Then,recent advances of TMDC FET sensor for pollutant detection in gaseous and aqueous media are,respectively,discussed.At last,future perspectives and challenges in practical application and commercialization are given for TMDC FET sensors.This article provides an overview on TMDC sensors for a wide variety of analytes with an emphasize on the increasing demand of advanced sensing technologies in environmental analysis.

Measuring Chinese Marine Environmental Efficiency:A Spatiotemporal Pattern Analysis

Environmental efficiency standards are often used to evaluate the costs of oceanic economic development. A variety of statistical analyses were applied in this study to quantify the marine environmental efficiency of 11 Chinese coastal provinces and municipalities between 2000 and 2014. Results initially reveal that environmental efficiency measures that incorporate undesirable outputs are more consistent with real production conditions and thus the use of marine economic and environmental efficiencies supplement and complement one another. Second, overall marine environmental efficiency across China tends to be low and can be spatially characterized by a transformation such that the inefficiencies noted in 2000 have subsequently been transformed to comprise a three-tiered structure that encompasses northern, central, and southern cores. Third, variation in absolute and relative marine environmental efficiency differences for the coastal regions of China have been consistent over time; values initially decreased before increasing again in a fluctuating manner over the time period of this analysis. Fourth, data show that the Pearl River Delta area has experienced the highest rate of change in marine environmental efficiency over time when economic zones are used as basic research units, although values have nevertheless fluctuated significantly. Fifth, values for total factor productivity as well as technical efficiency and change across the Chinese marine economy all fluctuated over time but increased. Data show that changes in marine environmental efficiency across China can primarily be attributed to progress in marine science and technology. Finally, levels of capital investment and marine industrial pollution intensity are not significantly correlated with marine environmental efficiency. Indeed, both marine industrial structural levels and environmental protection technologies have had a positive effect on environmental efficiency while levels of investment in marine scientific research as well as the scale of economic development, the marine economy, and the degree of external openness have all exerted negative effects on this key variable.

Environmental Characteristics of Groundwater:an Application of PCA to Water Chemistry Analysis in Yulin

For our investigation into the water quality in Yulin city, we collected 76 typical water samples to be tested for particle quality. By applying a Romani type classification method the groundwater of Yulin city was classified into nine categories by type, i.e., Ca-HCO3, Na-HCO3, Na-HCO3-SO4-Cl, Na-HCO3-SO4, Na-Cl, Na-Cl-HCO3, Na-Ca- HCO3, Ca-Cl-HCO3 and Ca-HCO3-SO4-Cl. A principal component analysis was carried out in order to analyze the groundwater environment. From this analysis we considered that the information collected could be represented by 21 indices from which we extracted seven principal components, which, respectively, accounted for 37.4%, 13.0%, 8.1%, 7.2%, 6.3%, 5.9% and 4.6% of the total variation. The results show that the groundwater environment of this region is largely determined by characteristic components of the natural groundwater background. One part of the water was polluted by leaching/eluviation of solid waste generated from coal mining. Another part of the ground water was contaminated by acid mine water from the coal layer and from improper irrigation. In addition, geological and hydrogeological conditions also cause changes in the water environment.

Assessment of Environmental Carrying Capacity Using Principal Component Analysis

Regional environmental carrying capacity (ECC) is nonlinear and spatially specific. A hierarchy index system including resources, environmental and socio-economic elements was established using an analytic hierarchy process. Principal component analysis (PCA) was used to estimate the regional size and differences of environmental carrying capacities. Main information of four principal components, i.e., carrying capacity of resources supply, carrying capacity of environmental quality, carrying capacity of social economy and carrying capacity of infrastructure construction, was extracted. The ECC evaluation value was divided into five levels of lowest carrying capacity, low carrying capacity, medium carrying capacity, high carrying capacity and highest carrying capacity, respectively. The results showed that on the whole ECC was at the medium carrying capacity level. ECC was generally highest in Guanzhong plain, followed by Loess Plateau, and was lowest in Qiba mountain. The carrying capacity of water resources and environmental quality was relatively low, and the infrastructure carrying capacity was highest among the four components. The temporal spatial variation of ECC was closely related to vulnerability of the natural resources and environment in the regions. Verification was proven that PCA was a useful tool when applied to evaluate ECC and reflect the spatial distribution of large-quantity ECC indices on a large regional scale. This study provides a basis for comprehensive understanding of resources, environment and management for regional balanced development.

Optimum Environmental Load Design Criterion for Marine Structures Based on Investment and Benefit Analysis

Marine structures operating in natural ocean environment are subjected to various stochastic loads. For design of the marine structures, the most important task is to determine environmental load design criterion. This paper presents a method to determine the optimum environmental load design criterion for marine structures. This method is based on the investment and benefit analysis and it can reach the design purpose of decreasing total costs during the service life of the structures and increasing economic benefits.