Establishment of a Quality Assurance System in the Online Monitoring of Electromagnetic Environment of Alternating Current Power Transmission and Transformation Facilities

With the acceleration of urbanization and increase of points in power systems,complaints about power grids have increased.In the actual on-site measurement process,although the actual measurement results can meet the relevant standards,some people are still concerned that the electromagnetic environment may change drastically outside the measurement period,which will have an impact on human health.In this study,the situation of electromagnetic online monitoring systems at home and abroad was introduced firstly,and then some practical requirements for establishing monitoring stations were analyzed.According to existing technologies and related writings,the methods and steps for establishing a quality assurance system were introduced,including the identification of quality assurance system activities and their corresponding structure of quality assurance system documents,the preparation and principles of the documents,and the operation of the quality assurance system.It intends to provide reference for the relevant organizations and personnel conducting electromagnetic environment monitoring when establishing a quality assurance system.Through the establishment of the online monitoring system and the later data publicity,the public have an intuitive understanding of the electromagnetic environment attenuation around power transmission and transformation projects,which can not only make China's electric power industry develop better,but also monitor the unexpected situation in time,maintain public safety and reduce people's fear of electromagnetic radiation in substations.

Monitoring and Evaluation of Present Situation of Environmental Quality in the Sea Area near the Aojiang Estuary in Wenzou

Based on the monitoring results of environmental quality in the sea area near the Aojiang estuary in Wenzou during 2010-2012,the present situation of environmental quality in the sea area was analyzed and evaluated. The results show that p H,DO,CODMn,petroleum,and heavy metals( Cu,Pb,Zn,Cd,Hg,As and Cr) in the sea area near the Aojiang estuary did not exceed the second-class standard of Seawater Quality Standard( GB 3097-1997),but both inorganic nitrogen and reactive phosphate in the sea area exceeded the second-class standard seriously,and the water quality of the sea area was in an eutrophic state; domestic sewage and fertilizer loss were the main sources of nitrogen and phosphorus. The standard index of most evaluation factors of sediment quality except for Zn was smaller than 1,meeting the demands of sediment quality for environmental protection.

Monitoring and Assessment of Current Situation of Environmental Quality in Yueqing Bay

Based on the monitoring results of environmental quality in Yueqing Bay during 2007-2014,the current situation of environmental quality in the bay was analyzed and assessed. The results show that pH,DO,CODMn,petroleum,and heavy metals( Cu,Pb,Zn,Cd,Hg,As and Cr)in the seawater of Yueqing Bay did not exceed the second class standard of Seawater Quality Standard( GB 3097-1997),but inorganic nitrogen and reactive phosphate in the seawater of Yueqing Bay exceeded the second class standard seriously,and the water quality of the bay was in an eutrophic state; the standard index of evaluation factors of sediment quality was smaller than 1,meeting the demands of sediment quality for environmental protection.

Marine environmental quality, pollution monitoring and environmental management

Chinese government has adopted a series of management measures to prevent and manage marine pollution and to protect ocean bio resources and ecosystem. The key points of Chinese marine environmental quality status, pollution monitoring and environmental management since 1980' were discussed in this paper. Those included the investigations of Chinese coast environmental quality, monitoring techniques and standards, as well as the marine environmental management measures. Recent status of marine environmental pollution and the monitoring network in China were also introduced.

Study on Factors Influencing the Quality of Automatic Monitoring Data of Pollution Sources and Technical Assurance Measures

Automatic monitoring data of pollution sources is an important basis for environmental supervision and management.At present,it is difficult to guarantee the quality of automatic monitoring data of pollution sources,and it is difficult to play the role of the monitoring data.In response to this problem,the factors influencing the quality of automatic monitoring data of pollution sources were analyzed in detail,and technical assurance measures for the quality of automatic monitoring data of pollution sources in Shandong Province were studied.Besides,the dynamic management and control idea of automatic monitoring of pollution sources was proposed,and specific technical measures were analyzed from five aspects of standardizing automatic monitoring equipment of pollution sources,improving the data collection and transmission system,establishing a mechanism for reporting operating status information of monitoring equipment,setting alarm rules and alarm processing procedures,and statistically analyzing the operating status of the equipment.Practice has proved that the dynamic management and control system can effectively ensure the quality of automatic monitoring data of pollution sources.

The Important Role of Quality Management in Environmental Monitoring

Environmental protection is an important topic of global concern in recent years,and environmental monitoring is one of the most intuitive and effective means to reflect the environmental situation.With the increasing task of environmental monitoring,the number of environmental monitoring institutions is increasing.It should strengthen quality management to ensure the accuracy and effectiveness of environmental monitoring results.

Data Quality Assurance Techniques for a Monitoring and Diagnosis System

By researching the data quality problem in the monitoring and diagnosis system （MDS） , the method of detecting non-condition data based on the development trend of equipment condition is proposed, and three requirements of criteria for detecting non-condition data： dynamic, syntheses and simplicity are discussed. According to the general mode of data management in MDS, a data quality assurance system （DQAS） comprising data quality monitoring, data quality diagnosis, detection criteria adjusting and artificial confirmation is set up. A route inspection system called MTREE realizes the DQAS. Aiming at vibration data of route inspection, two detecting criteria are made. One is the quality monitoring parameter, which is found through combining and optimizing some fundamental parameters by genetic programming （GP）. The other is the quality diagnosis criterion, i. e. pseudo distance of Spectral-Energy-Vector （SEV） named Adjacent J-divergence, which indicates the variation degree of adjacent data＇s spectral energy distribution. Results show that DQAS, including these two criteria, is effective to improve the data quality of MDS.

Air Quality Monitoring and Its Implication on the Environmental Licensing Process in Brazil

In the state of Sao Paulo, Brazil, public policies regarding the air quality aimed at the welfare of the population are strongly dependent on monitoring conducted by the Sao Paulo State Environmental Company (CETESB), which can be influenced by faulty monitors and equipment support and cuts in power supply, among others. A research conducted from 1998 to 2008 indicated that a significant portion of the air quality automatic stations in the state of Sao Paulo did not meet the criterion of representativeness of measurements of PM10, NO2, O3, CO and SO2 concentrations which resulted in the classification of some municipalities as the nonattainment area, a situation evidenced for PM10 and O3 parameters. The network unavailability for each parameter was estimated and compared with the monitoring networks operated in Canada and the UK. This paper discusses the implications of the lack of representativeness of measurements in the environmental licensing process of pollution sources from 2008, when by the effect of state law, municipalities have been qualified according to their air quality nonattainment level.

Quality assurance and quality control in the laboratory andrology

Quality assurance （QA） and quality control （QC） are fundamental aspects of any laboratory measurement. However, in comparison with other medical disciplines, the need for QA and QC in laboratory andrology has been recognized only recently. Furthermore, there is evidence that the effort required to undertake QA and QC has not been wholly welcomed by some clinicians. Nevertheless, accrediting bodies and regulatory authorities increasingly require evidence that laboratories have effective QA and QC measures in place because both are central to the quality management processes. Following the publication of the 5th edition of the World Health Organization Laboratory Manual, existing QA and QC systems will need to be updated to take into account some of the methodological changes recommended by the manual. Three of these are discussed in this commentary; they relate to： （i） the move to infer semen volume from its weight; （ii） the re-classification of sperm motility grades from four to three; and （iii） the publication of a lower reference limit for morphology of 4% （with a corresponding 95% confidence interval of 3%-4%）. The importance of QA and QC in all laboratory tests, including up and coming new tests to assess sperm DNA integrity, is discussed. The need for adequate initial training and continuing professional development programmes to support laboratory scientists performing andrology is also described.

Dynamic estimation and reliability control of quality assurance for bored piles

A systematic method was proposed to estimate the occurrence probability of defective piles(OPDP) from a site according to quality assurance inspection. The OPDP was firstly suggested as the criterion to weight the performance of a pile foundation. Its prior distribution and updating distribution were deduced to follow Beta distributions. To calibrate the OPDP, a dynamic estimation model was established according to the relationships between prior mean and variance and updating mean and variance. Finally, a reliability-control method dealing with uncertainties arising from quality assurance inspection was formalized to judge whether all the bored piles from a site can be accepted. It is exemplified that the OPDP can be substantially improved when more definite prior information and sampling formation become available. For the example studied herein, the Bayesian estimator of updating variance for OPDP is reduced from 0.0037 to 0.0014 for the first inspection, from 0.0014 to 0.0009 for the second inspection, and with less uncertainty by incorporating experience information.

Application of Statistical Process Control for Setting Action Thresholds as Quality Assurance of Dose Verifications in External Beam Radiotherapy

Purpose: To test the concept of Statistical Process Control (SPC) as a Quality Assurance (QA) procedure for dose verifications in external beam radiation therapy in conventional and 3D Conformal Radiotherapy (3D-CRT) treatment of cervical cancer. Materials and Methods: A study of QA verification of target doses of 198 cervical cancer patients undergoing External Beam Radiotherapy (EBRT) treatments at two different cancer treatment centers in Kenya was conducted. The target doses were determined from measured entrance doses by the diode in vivo dosimetry. Process Behavior Charts (PBC) developed by SPC were applied for setting Action Thresholds (AT) on the target doses. The AT set was then proposed as QA limits for acceptance or rejection of verified target doses overtime of the EBRT process. Result and Discussion: Target doses for the 198 patients were calculated and SPC applied to test whether the action limits set by the Process Behavior Charts could be applied as QA for verified doses in EBRT. Results for the two sub-groups of n = 3 and n = 4 that were tested produced action thresholds which are within clinical dose specifications for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. Conclusion: Action thresholds set by SPC were within the clinical dose specification of ±5% uncertainty for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. So the concept of SPC could be applied in setting QA action limits for dose verifications in EBRT.

Study on Division Method of Quality Monitoring Control Area Based on Comprehensive Cultivated Land Attribute

The quality change of cultivated land resources requires the scientific deployment of monitoring areas.In this study,Yuzhou City is taken as an example to divide the quality monitoring control areas through the study of natural quality,utilization level,income level,and utilization characteristics,etc.Compared with the traditional administrative unit division or cultivated land quality division method,the regional homogeneity of this study is stronger,and there are quality differences between regions.It provides precondition and precision guarantee for the monitoring of cultivated land quality.

A Modification of SOM Network(SLFM) and Its Applications in Tool Wear Monitoring and Quality Control

In this paper, a Supervised Linear Feature Mapping(SLFM) algorithm, as a modification of the Kohonen Self Organizing Mapping (SOM),is proposed. The applications in cutting tool wear estimation and quality control and the comparison with a back propagation (BP) algorithm are discussed. The results show that the SLFM algorithm requires less training time and has higher accuracy compared with the BP algorithm. It might be a great potential approach to integrate multi sensor information in process control.

QUALITY ASSURANCE INFORMATION SYSTEM FOR AGILE MANUFACTURING

The customer driven dynamic global market and geographical distribution of collaborating partners bring new challenges to the development of quality assurance information system (QAIS) for agile manufacturing. With recent dramatic advances in information technology, firstly the requirements of QAIS are examined in agile manufacturing environment, then a new implementation framework of a distributed QAIS is presented, where a deve loping environment of QAIS is established and some critical techniques are studied. Finally a prototype system based on world wide web (WWW) is accomplished.

A HybridManufacturing ProcessMonitoringMethod Using Stacked Gated Recurrent Unit and Random Forest

This study proposed a new real-time manufacturing process monitoring method to monitor and detect process shifts in manufacturing operations.Since real-time production process monitoring is critical in today’s smart manufacturing.The more robust the monitoring model,the more reliable a process is to be under control.In the past,many researchers have developed real-time monitoring methods to detect process shifts early.However,thesemethods have limitations in detecting process shifts as quickly as possible and handling various data volumes and varieties.In this paper,a robust monitoring model combining Gated Recurrent Unit(GRU)and Random Forest(RF)with Real-Time Contrast(RTC)called GRU-RF-RTC was proposed to detect process shifts rapidly.The effectiveness of the proposed GRU-RF-RTC model is first evaluated using multivariate normal and nonnormal distribution datasets.Then,to prove the applicability of the proposed model in a realmanufacturing setting,the model was evaluated using real-world normal and non-normal problems.The results demonstrate that the proposed GRU-RF-RTC outperforms other methods in detecting process shifts quickly with the lowest average out-of-control run length(ARL1)in all synthesis and real-world problems under normal and non-normal cases.The experiment results on real-world problems highlight the significance of the proposed GRU-RF-RTC model in modern manufacturing process monitoring applications.The result reveals that the proposed method improves the shift detection capability by 42.14%in normal and 43.64%in gamma distribution problems.

Investigating the Air Quality Parameters in Louisiana’s Industrial Corridor: A Baton Rouge Case Study

In a local context, sustainable development entails utilizing the current resources—material and immaterial, measurable and immeasurable, popular and unpopular—of the community in a manner that avoids overexploitation and ensures intergenerational equity. This approach prioritizes the safety and health of local citizens, placing communal productivity above corporate profitability. This research aims to assess air quality surrounding 28 chemical industry sites in Baton Rouge, Louisiana, to understand the environmental and health impacts of industrial pollutants, with a focus on environmental justice. Air quality pollutants, including PM2.5, PM10, O3, NO2, CO, and SO2, were monitored for 75 days during the Summer, using the BreezoMeter app. Python, Mapize, and QGIS software technologies were utilized for data analysis and visualization. Findings indicate a reduction in NO2 and CO levels, compared to existing literature. However, the persistent challenge of particulate matter suggests areas for further environmental management efforts. Additionally, the research suggests a significant disparity in air pollution exposure, probably affecting marginalized communities. Although the nature of the study might not fully capture annual pollution trends, the findings highlight the urgent need for the chemical industry to adopt efficient production methods and for policymakers to enhance air quality standards and enforcement, particularly in pollution-sensitive areas. The disproportionate impact of air pollution on vulnerable communities calls for a more inclusive approach to environmental justice, ensuring equitable distribution of clean air benefits and community involvement in pollution management decisions.

Environmental monitoring and fuzzy synthetic evaluation of municipal solid waste transfer stations in Beijing in 2001-2006

Transfer station(TS)is an integral part of present-day municipal solid waste(MSW)management systems.To provide information for the incorporation of waste facilities within the current integrated waste management system,the authors measured the existing environmental quality at five MSW TSs.Discharged wastewater,air,and noise were monitored and assayed at the five TSs in Beijing in 2001-2006 during rainy seasons(RSs)and dry seasons(DSs).Except Ammonia(NH_3)and hydrogen sulfide(H_2S),the analytical results of...

Development and Challenge of HIV/AIDS Testing Laboratory Network and Quality Assurance System in China

This paper describes the development and challenge of HIV/AIDS testing laboratory network and quality assurance system in China. At present,the HIV/AIDS testing laboratories includes three classes,the National AIDS Reference Laboratory,HIV/AIDS confirmatory laboratories and HIV/AIDS screening laboratories. All of them are accredited by the health authorities,and each class of laboratories take charge of their function strictly according to the "National Management of HIV/AIDS Detection (2006)". A complete quality assurance and quality control system for HIV/AIDS testing has been developed,which includes technical training,strict laboratory monitoring and approval,examination or proficiency testing on HIV/AIDS detection,and quality evaluation and supervision of HIV/AIDS diagnostic kits. Besides conduct the routine anti-HIV antibody test,more and more laboratories began to conduct other tests,such as CD4+ T lymphocyte cell counting,HIV viral load,HIV DNA PCR,genotyping,drug resistance,and HIV-1 recent infection test. The primary challenges faced by the HIV/AIDS testing laboratory network are in the areas of laboratory management and quality control. For example,the provincial PT program is inefficient,the internal quality control is conducted perfunctorily,personnel training can not met the needs of the workplace,which need to be improved.

The environmental influences on the bacteriological quality of red and chicken meat stored in fridges

Objective: To investigate the environmental influences on the bacteriological quality of red and chicken meats on fridges.Methods: The environmental health status was determined by reliable and valid researcher-made checklist.Then 264 samples were gathered in two phases(at the entrance and three months later) and examined for total bacteria count, Escherichia coli,Staphylococcus aureus and Salmonella spp.Results: The result revealed that the mean of total bacteria count, E.coli and S.aureus densities had significant differences in two steps on chicken and the red meat samples(P < 0.05).Among the environmental factors, sanitary status, temperature and personal hygiene had significant effects on total bacteria count and S.aureus densities in chicken samples(P < 0.05), and between wastewater and solid waste disposal with E.coli density in red meat samples(P < 0.05).Conclusions: The results implied that the bacteriological quality of red and chicken meat fluctuates with environmental status(especially temperature, sanitary status and personal hygiene).Regular control, improving of sanitary health, and staff training are necessary for elimination of bacterial contamination.

Big Data Analytics with Artificial Intelligence Enabled Environmental Air Pollution Monitoring Framework

Environmental sustainability is the rate of renewable resourceharvesting, pollution control, and non-renewable resource exhaustion. Airpollution is a significant issue confronted by the environment particularlyby highly populated countries like India. Due to increased population, thenumber of vehicles also continues to increase. Each vehicle has its individualemission rate;however, the issue arises when the emission rate crosses thestandard value and the quality of the air gets degraded. Owing to the technological advances in machine learning (ML), it is possible to develop predictionapproaches to monitor and control pollution using real time data. With thedevelopment of the Internet of Things (IoT) and Big Data Analytics (BDA),there is a huge paradigm shift in how environmental data are employed forsustainable cities and societies, especially by applying intelligent algorithms.In this view, this study develops an optimal AI based air quality prediction andclassification (OAI-AQPC) model in big data environment. For handling bigdata from environmental monitoring, Hadoop MapReduce tool is employed.In addition, a predictive model is built using the hybridization of ARIMAand neural network (NN) called ARIMA-NN to predict the pollution level.For improving the performance of the ARIMA-NN algorithm, the parametertuning process takes place using oppositional swallow swarm optimization(OSSO) algorithm. Finally, Adaptive neuro-fuzzy inference system (ANFIS)classifier is used to classify the air quality into pollutant and non-pollutant.A detailed experimental analysis is performed for highlighting the betterprediction performance of the proposed ARIMA-NN method. The obtainedoutcomes pointed out the enhanced outcomes of the proposed OAI-AQPCtechnique over the recent state of art techniques.