A review of ultra-high temperature heat-resistant energetic materials

Heat-resistant energetic materials refer to a type of energetic materials that possess a high melting point,high stability and operational safety. By studying the structures of these energetic materials has showed that the thermal stability can be enhanced by introducing amino groups to form intra/inter-molecular hydrogen bonds, constructing conjugate systems and designing symmetrical structures. This article aims to review the physical and chemical properties of ultra-high temperature heat-resistant energetic compounds and provide valuable theoretical insights for the preparation of ultra-high temperature heatresistant energetic materials. We also analyze the selected 20 heat-resistant energetic materials with decomposition temperatures higher than 350℃, serving as templates for the synthesis of various highperformance heat-resistant energetic materials.

Effects of Austenite Stabilization on the Onset of Martensite Transformation in T91 Steel

The influences of thermal stabilization of austenitic on the onset temperature for a martensite transformation in T91 ferritic heat-resistant steel were studied by high-resolution differential dilatometer. The phase transformation kinetic information was obtained by adopting lever rule from the recorded dilatometric curves. The results show that an inverse stabilization, featured by the damage of ＂the atmosphere of carbon atoms＂ and the increase of the starting temperature for martensite transformation takes place when the T91 ferritic steel is isothermally treated above the Ms point, and it becomes strong with increasing the holding time. While the continued temperature for martensite transformation decreases gradually when isothermally holding at a temperature below Ms point. The observed inverse stabilization behavior could be attributed to the relatively high temperature of Ms point in the explored T91 ferritic heat-resistant steel.

Laves Phase Formation and Its Effect on Mechanical Properties in P91 Steel

Effect of Laves phase formation on mechanical properties in a pressurized T-junction of P91 steel pipe at849 K for 58,000 h with 25.65 MPa vapor pressure was studied. Thermodynamic calculations had been performed by using the software Thermo-Calc to study the phase at equilibrium state. Counter plot of von Mises stress in the pipe during service life was calculated by finite element analysis to study the effect of the operated stress distribution on the evolution of Laves phase. The change in the microstructure and mechanical properties in the sites with different stress was also studied. The results indicated that the formation of Laves phase in P91 steel was a thermodynamically possible process due to enrichment of Mo and depletion of C adjacent to M23C6 particles or along martensite lath and packet boundaries. The formation of Laves phase had a detrimental influence on the mechanical properties in P91 steel. The mean size of Laves phase would be significantly increased with increasing operated stress, leading to a reduction in tensile properties and impact energy. In particular, crack initiation energy and crack growth energy during impact test rapidly decreased with increasing the mean size and volume fraction of Laves phase.