High frequency doubling efficiency THz GaAs Schottky barrier diode based on inverted trapezoidal epitaxial cross-section structure

A high-performance terahertz Schottky barrier diode(SBD)with an inverted trapezoidal epitaxial cross-sectional structure featuring high varactor characteristics and reverse breakdown characteristics is reported in this paper.Inductively coupled plasma dry etching and dissolution wet etching are used to define the profile of the epitaxial layer,by which the voltage-dependent variation trend of the thickness of the metal-semiconductor contact depletion layer is modified.The simulation of the inverted trapezoidal epitaxial cross-section SBD is also conducted to explain the physical mechanism of the electric field and space charge region area.Compared with the normal structure,the grading coefficient M increases from 0.47 to 0.52,and the capacitance modulation ratio(C^(max)/C_(min))increases from 6.70 to 7.61.The inverted trapezoidal epitaxial cross-section structure is a promising approach to improve the variable-capacity ratio by eliminating the accumulation of charge at the Schottky electrode edge.A 190 GHz frequency doubler based on the inverted trapezoidal epitaxial cross-section SBD also shows a doubling efficiency of 35%compared to that 30%of a normal SBD.

Study of quantum well mixing induced by impurity-free vacancy in the primary epitaxial wafers of a 915 nm semiconductor laser

Output power and reliability are the most important characteristic parameters of semiconductor lasers.However,catas-trophic optical damage(COD),which usually occurs on the cavity surface,will seriously damage the further improvement of the output power and affect the reliability.To improve the anti-optical disaster ability of the cavity surface,a non-absorption window(NAW)is adopted for the 915 nm InGaAsP/GaAsP single-quantum well semiconductor laser using quantum well mix-ing(QWI)induced by impurity-free vacancy.Both the principle and the process of point defect diffusion are described in detail in this paper.We also studied the effects of annealing temperature,annealing time,and the thickness of SiO_(2) film on the quan-tum well mixing in a semiconductor laser with a primary epitaxial structure,which is distinct from the previous structures.We found that when compared with the complete epitaxial structure,the blue shift of the semiconductor laser with the primary epi-taxial structure is larger under the same conditions.To obtain the appropriate blue shift window,the primary epitaxial struc-ture can use a lower annealing temperature and shorter annealing time.In addition,the process is less expensive.We also pro-vide references for upcoming device fabrication.

A Molecular Dynamics Study on the (1120) Domain Boundary Structures in Epitaxial Wurtzite GaN

A computer program has been developed for the moIlcular dynamics calculation of ionic orstrong-ionic covalent systems. Ewald summation algorithm and Keating potentiaI model areadopted to calculate the long-range Coulomb interaction and the short-range bonding forces,respectively. A theoretical study on the domain boundary structures in epitaxial wurtzite GaN film is accomplished with the program. The calculation result is used in the structure formationexplanation of an interesting defect observed by HREM experiment.

Cubic ZnO films obtained at low pressure by molecular beam epitaxy

A zinc oxide thin film in cubic crystalline phase, which is usually prepared under high pressure, has been grown on the Mg O（001） substrate by a three-step growth using plasma-assisted molecular beam epitaxy. The cubic structure is confirmed by in-situ reflection high energy electron diffraction measurements and simulations. The x-ray photoelectron spectroscopy reveals that the outer-layer surface of the film（less than 5 nm thick） is of ZnO phase while the buffer layer above the substrate is of ZnMgO phase, which is further confirmed by the band edge transmissions at the wavelengths of about 390 nm and 280 nm, respectively. The x-ray diffraction exhibits no peaks related to wurtzite ZnO phase in the film. The cubic ZnO film is presumably considered to be of the rock-salt phase. This work suggests that the metastable cubic ZnO films, which are of applicational interest for p-type doping, can be epitaxially grown on the rock-salt substrates without the usually needed high pressure conditions.