Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acryla...Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acrylated UPEAs resin (i.e. AUPEAs). Interacting blends of equal proportional AUPEAs and vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapour pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA).展开更多
文摘Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acrylated UPEAs resin (i.e. AUPEAs). Interacting blends of equal proportional AUPEAs and vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapour pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA).
文摘为了提高丙烯酸树脂的耐水性、附着力以及耐溶剂性,以桐油酸和环氧树脂E-44为原料制备环氧酯,采用溶液聚合和自乳化工艺合成了环氧酯改性水性丙烯酸树脂,并引入氰特CY325氨基树脂制备双组分环氧酯改性水性丙烯酸树脂漆膜。利用FT-IR、1 H NMR、粒径测试等对环氧酯单体、环氧酯改性水性丙烯酸树脂的结构和性能进行表征和分析,并测试了单组分和双组分环氧酯改性水性丙烯酸树脂漆膜的硬度、光泽、吸水率、水接触角、耐溶剂性等性能。结果表明:当环氧酯用量为35%时,单/双组分漆膜综合性能达到最佳,双组分漆膜光泽(60°)达102.3,耐溶剂擦拭次数为500次,耐水性可达480 h,附着力为0级,铅笔硬度为4H,耐冲击性为50 cm。
