Laboratory evaluation of epoxy resin modified asphalt mixtures

The pavement performance of epoxy resin modified asphalt mixtures was investigated by the Marshall test, the indirect tensile test, the rutting test, the three-pointed bending test and the composite beam fatigue test. In comparison with the performance of epoxy resin modified asphalt mixtures, the performance of stone matrix asphalt mixtures （SMA10） was also investigated. The rutting test and composite beam fatigue test results show that the epoxy resin modified asphalt mixtures can improve permanent deformation and fatigue characteristics. They also show lower temperature susceptibility and greater resistance to moisture damage compared to the SMA10. Findings from the research indicate that the epoxy resin modified asphalt mixture provides an optional material for the pavement of long-span steel bridges in China due to profound performance and economic advantages.

Evaluation of modification effect of epoxy resin based on performance of asphalt mixtures

Based on the analysis of the main failures discovered in pavement on steel deck plate and the demanding service condition of the pavement on steel deck, high-temperature rutting test, low-temperature bending test and controlled stress flexural fatigue test are used to study the performance of asphalt mixtures modified by epoxy resin including high-temperature stability, low-temperature cracking-resistance, and fatigue cracking-resistance, which are served to evaluate the modification effect of epoxy resin of different contents. With the addition of epoxy resin, all the three performances are improved greatly. However, when the amount of epoxy resin added is over a certain value, the modification effect will be stable with no extra benefit detected. Finally, in terms of the properties of the three respects, 20%, 30%, 30% are given separately as the proposal adding contents.

Effects of filler loading and surface modification on electrical and thermal properties of epoxy/montmorillonite composite

Epoxy-based composites containing montmorillonite(MMT)modified by silylation reaction withγ-aminopropyltriethoxysilane(γ-APTES)and 3-(glycidyloxypropyl)trimethoxysilane(GPTMS)are successfully prepared.The effects of filler loading and surface modification on the electrical and thermal properties of the epoxy/MMT composites are investigated.Compared with the pure epoxy resin,the epoxy/MMT composite,whether MMT is surface-treated or not,shows low dielectric permittivity,low dielectric loss,and enhanced dielectric strength.The MMT in the epoxy/MMT composite also influences the thermal properties of the composite by improving the thermal conductivity and stability.Surface functionalization of MMT not only conduces to the better dispersion of the nanoparticles,but also significantly affects the electric and thermal properties of the hybrid by influencing the interfaces between MMT and epoxy resin.Improved interfaces are good for enhancing the electric and thermal properties of nanocomposites.What is more,the MMT modified with GPTMS rather thanγ-APTES is found to have greater influence on improving the interface between the MMT filler and polymer matrices,thus resulting in lower dielectric loss,lower electric conductivity,higher breakdown strength,lower thermal conductivity,and higher thermal stability.

Acrylate Copolymers as Impact Modifi er for Epoxy Resin

P（BA-GMA）（PBG）, having various molecular weights, was synthesized by in situ polymerization of butyl acrylate（BA） and glycidyl methacrylate（GMA）, and further used as a modifier to improve the comprehensive properties of the epoxy curing system. The copolymers were characterized by gel permeation chromatography（GPC）. The effects of various molecular weights of copolymers on the mechanical properties, thermal performance, and phase behavior of the curing system were carefully evaluated. The experimental results of differential scanning calorimetry（DSC） and dynamic mechanical analysis（DMA） showed that glass transition temperature decreased and the tan δ peak shifted to a lower temperature with decreasing molecular weight of copolymer. Mechanical properties analysis of curing films showed that the impact strength and fracture toughness increased significantly upon the addition of PBG, indicating good toughness of the modified epoxy resins. From scanning electron microscopy（SEM） studies of the fracture surfaces of ER/PBG systems, the fracture behavior of epoxy matrix was changed from brittleness to toughness.

Initiation of Single-part Epoxy in Cementitious System-Ⅱ

Single-component epoxy cement system is an interesting material used in construction engineering, and it is different from traditional two-component epoxy-cement system. We studied the interaction mechanism of single-component epoxy-cement system only in the range of macro mechanical performances, and used the cement and single-component epoxy directly to investigate the interaction between the both. Solidstate 13 C NMR, FT-IR, Raman spectroscopy and XRD were employed to trace the change of the system. Results showed that the epoxide rings in cementitious environment had been opened by cement ingredients. It was true that single-component epoxy could be used as reactive additive in cementitious system.

A Low Temperature Vulcanized Transparent Silane Modified Epoxy Resins for LED Filament Bulb Package

In this work, low-temperature vulcanized, transparent silane modified epoxy resins for LED filament bulb package were prepared. Firstly, transparent silane modified epoxy resins were produced through a controllable sol-gel method using γ-（2,3-epoxypropoxy）propytrimethoxysilane and dimethyldiethoxylsilane. The features of the reaction were investigated and the products were characterized in detail. Subsequently, various curing agents were explored to prepare transparent silane modified epoxy resins. The silane modified epoxy resins cured by PEA-230 at a fairly low temperature（40 °C/2 h then 60 °C/1 h） exhibited excellent thermal stability with a thermal degradation temperature as high as 316.5 °C and adjustable hardness between 40-60 shore A. The application tests showed the materials obtained were good candidates for LED filament bulb package.