A novel epoxy-imide resin based on diglycidyl ether of bisphenol-A and N-（4-hydroxyphenyl）terahydrophthalic anhydrideimide（HTAM） was synthesized. The structural characterization of the epoxy-imide resin was conduc...A novel epoxy-imide resin based on diglycidyl ether of bisphenol-A and N-（4-hydroxyphenyl）terahydrophthalic anhydrideimide（HTAM） was synthesized. The structural characterization of the epoxy-imide resin was conducted by FT-IR spectra. 4,4＇-diaminodiphneylmethane（DDM） was used as a curing agent for the epoxy-imide resin. The thermal properties of the cured resin were evaluated with dynamic mechanical analyses（DMA） and thermogravimetric analysis（TGA）. The results showed that the cured resin exhibited a high glass transition temperature（Tg） of 186 ℃ when the molar amount of HTAM was 0.04 mol in the resin. The yields of the cured resin at 800 ℃ raised from 16.45% to 19.41%. The flexural properties were also measured, the flexural strength raised from 79.4 to 95.7 MPa, and the flexural modulus exhibited from 2.6 to 3.0 GPa.展开更多
基金Funded by the National Natural Science Foundation of China(No.51572205)the National Natural Science Foundation of Hubei Province,China(No.2014CFB854)the Equipment Pre-Research Joint Fund of EDD and MOE(No.6141A02033209)
文摘A novel epoxy-imide resin based on diglycidyl ether of bisphenol-A and N-（4-hydroxyphenyl）terahydrophthalic anhydrideimide（HTAM） was synthesized. The structural characterization of the epoxy-imide resin was conducted by FT-IR spectra. 4,4＇-diaminodiphneylmethane（DDM） was used as a curing agent for the epoxy-imide resin. The thermal properties of the cured resin were evaluated with dynamic mechanical analyses（DMA） and thermogravimetric analysis（TGA）. The results showed that the cured resin exhibited a high glass transition temperature（Tg） of 186 ℃ when the molar amount of HTAM was 0.04 mol in the resin. The yields of the cured resin at 800 ℃ raised from 16.45% to 19.41%. The flexural properties were also measured, the flexural strength raised from 79.4 to 95.7 MPa, and the flexural modulus exhibited from 2.6 to 3.0 GPa.
