Microstructure evolution and texture development and their effects on mechanical properties of a Mg-Gd-Y-Zr alloy during equal channel angular pressing（ECAP） were investigated.It is found that the microstructure is ...Microstructure evolution and texture development and their effects on mechanical properties of a Mg-Gd-Y-Zr alloy during equal channel angular pressing（ECAP） were investigated.It is found that the microstructure is still inhomogeneous after four passes,and two zones,namely the fine grain zone（FGZ） and the coarse grain zone（CGZ） are formed.The grain refinement occurs mainly by particle-stimulated nucleation（PSN） mechanism,which led to a more random texture after four passes of ECAP.In the ECAP-processed alloy,the strength did not increase while the ductility was enhanced dramatically compared with the as-received condition.The change of ductility of this alloy was discussed in terms of texture and second phase particles.展开更多
Equal Channel Angular Pressing(ECAP)is one of the most applicable Sever Plastic Deformation(SPD)processes which leads to strength and ductility improvement through the grain refining and development of a suitable text...Equal Channel Angular Pressing(ECAP)is one of the most applicable Sever Plastic Deformation(SPD)processes which leads to strength and ductility improvement through the grain refining and development of a suitable texture.In this study,after designing and manufacturing a suitable die,4 pass ECAP process at route C is done on strip shaped specimens of AZ31 magnesium alloy in order to achieve desirable microstructural and mechanical properties.Microstructure then got studied through the optical microscopy.Results show that mean grain size is decreased and grain size distribution got close to normal distribution state by increasing the pass number.However,the grain size is reduced by increasing of ECAP temperature.展开更多
AZ31 Mg alloy bar was subjected to 8-pass equal-channel angular pressing(ECAP) at 623 K. Microstructure evolution was observed by optical microscopy(OM) on cross section and X-ray diffraction analysis. The room temper...AZ31 Mg alloy bar was subjected to 8-pass equal-channel angular pressing(ECAP) at 623 K. Microstructure evolution was observed by optical microscopy(OM) on cross section and X-ray diffraction analysis. The room temperature mechanical properties of the ECAP processed specimens were also investigated. A fine-grained structure with an average sub-grain size of 9 μm is obtained after 7 ECAP passes. XRD analysis indicates that after ECAP,in placing of {1 010},planes {1 011} and {1 012} become the dominant directions that are favourable for grain refinement. ECAP processed AZ31 Mg alloy exhibits significant improvement in elongation but decrease in strength. The elongation of the specimen increases continuously up to 2 passes and then remains stable at further passes. This improvement can be related to the evolution of crystallographic texture and the scattered orientation of the basal plane(0001).展开更多
Samples of a commercial Cu-lCr-0.1Zr(mass fraction,%) alloy were subjected to equal channel angular pressing(ECAP) up to 16 passes at room temperature following route Bc.Differential scanning calorimetry(DSC) was used...Samples of a commercial Cu-lCr-0.1Zr(mass fraction,%) alloy were subjected to equal channel angular pressing(ECAP) up to 16 passes at room temperature following route Bc.Differential scanning calorimetry(DSC) was used to highlight the precipitation sequence and to calculate the stored energy,recrystallization temperature and activation energy after each ECAP pass.On another hand,electrical properties were correlated with the dislocation density.Results show that the stored energy increases upon increasing ECAP pass numbers,while the recrystallization temperature decreases significantly.展开更多
Equal-channel angular pressing(ECAP) is now recognized as an effective technique for fabricating ultrafine grained materials. The results show that prevalent macroscopic shear banding occurs in ECAP as long as the pre...Equal-channel angular pressing(ECAP) is now recognized as an effective technique for fabricating ultrafine grained materials. The results show that prevalent macroscopic shear banding occurs in ECAP as long as the pressing passes reach 2, and the severe macroscopic shear band extends from bottom to top surface and slants to the longitudinal axis of specimen at an angle of about 45°, develops at regular intervals, with a high shear strain accommodation of about 3.7 within the band. Different families of macroscopic shear bands may cut across each other, and over 60% of sample volume is occupied by macroscopic shear band when the ECAP reaches 4 passes.展开更多
Equal channel angular pressing （ECAP） is an attractive process method to produce bulk uhra-fine grained materials. There are many experiment evidences showing that the nature of the microstructural evolution in mult...Equal channel angular pressing （ECAP） is an attractive process method to produce bulk uhra-fine grained materials. There are many experiment evidences showing that the nature of the microstructural evolution in multi-pass ECAP depends on process routes. Isothermal three dimensional FEM simulations for muhi-pass ECAP were performed using DEFORM3D finite element code. The material model of 6061A1-T6 was employed. Flow nets, effective strain distribution in the workpiece and loads during multi-pass ECAP using different routes were analysed respectively, The simulations show process routes influence material flow and effective strain distri- bution in the workpiece obviously but have few influence on loads.展开更多
Among the various Severe Plastic Deformation(SPD)processes,Equal Channel Angular Pressing(ECAP)is one of the most applicable one which improves strength and ductility due to grain refinement and suitable texture devel...Among the various Severe Plastic Deformation(SPD)processes,Equal Channel Angular Pressing(ECAP)is one of the most applicable one which improves strength and ductility due to grain refinement and suitable texture development.In this study,cold rolling were carried out on the 4 pass ECAPed(in route A and C)strip shaped specimens of AZ31 magnesium alloy to investigate the ECAP effects on the roll-ability.Results showed that reduction in area which can be concerned as an index for roll-ability increased after ECAP.It was also seen that ECAP in route C enhanced roll-ability more than route A.展开更多
Al-11%Si(mass fraction)alloy was transformed into a ductile material by equal-channel angular pressing(ECAP)with a rotary die.Two mechanisms at impact test,slip deformation by dislocation motion and grain boundary sli...Al-11%Si(mass fraction)alloy was transformed into a ductile material by equal-channel angular pressing(ECAP)with a rotary die.Two mechanisms at impact test,slip deformation by dislocation motion and grain boundary sliding,were discussed.The ultrafine grains with modified grain boundaries and the high content of fine particles(<1μm)were necessary for attaining high absorbed energy.The results contradict the condition of slip deformation by dislocation motion and coincide with that of grain boundary sliding.Many fine zigzag lines like a mosaic were observed on the side surface of the tested specimens.These observed lines may show grain boundaries appeared by the sliding of grains.展开更多
The microstructural evolution of a recycled aluminum alloy after equal channel angular pressing （ECAP） up to four passes was investigated using X-ray diffxaction （XRD） analysis and transmission electron microscopy...The microstructural evolution of a recycled aluminum alloy after equal channel angular pressing （ECAP） up to four passes was investigated using X-ray diffxaction （XRD） analysis and transmission electron microscopy （TEM）. Microhardness tests were performed to determine the associated changes in mechanical properties. An ultrafine-grained material has been obtained with a microstructure showing a mixture of highly strained crystallites. A high density of dislocations was achieved as a result of severe plastic deformation （SPD） through the die. Changes in mechanical behavior are also revealed after ECAP due to strain hardening. Thermal analysis and TEM micrographs ob- tained after annealing indicate the succession of the recovery, recrystallization, and grain growth phenomena. Moreover, the energy stored during ECAP may be related to the dislocation density introduced by SPD. We finally emphasize the role played by the precipitates in this alloy.展开更多
The extended band structures of as-cold-rolled high Cr steel sheets are recrystallisation-resistant, and tend to become aggregates of the so-called grain colonies as a partially recovered state after final annealing. ...The extended band structures of as-cold-rolled high Cr steel sheets are recrystallisation-resistant, and tend to become aggregates of the so-called grain colonies as a partially recovered state after final annealing. Such band structures diminish formability and become origin of the so-called ridging. A novel processing will be shown here, which involves strain-path change by introducing one-pass ECAP prior to cold-rolling, and facilitates recrystallisation. Indeed, the recrystallisation temperature was reduced by 100℃, compared with cold-rolling alone imposing an equivalent strain. Grain- scale microshear bands introduced during one-pass ECAP perturbed the banded structures in post-ECAP cold-rolling and enhanced the recrystallisation at the final annealing.展开更多
A review on severe plastic deformation（SPD） technique of equal channel angular pressing（ECAP） process of commercially pure titanium（CP-Ti） alloys was presented with a major emphasize on the influence of ECAP par...A review on severe plastic deformation（SPD） technique of equal channel angular pressing（ECAP） process of commercially pure titanium（CP-Ti） alloys was presented with a major emphasize on the influence of ECAP parameters that include channel and curvature angles, processing route, temperature of operation, pressing speed, internal heating, number of pass through the die and back pressure. Various ECAP characteristics such as microstructure, strain inhomogeneity and mechanical properties are considered to achieve the maximum homogeneity, equilibrium grain refinement and mechanical improvement of CP-Ti. Investigations show that a pressing speed of 1-3 mm/s at 450 °C with route BC along with channel and curvature angles of 90° and 20° respectively with backpressure can lead to the most homogeneous ultrafine microstructure.展开更多
Surface morphology and deuterium retention in ultrafine-grained tungsten fabricated by equal-channel angular pressing（ECAP） have been examined after exposure to a low energy,high-flux deuterium（D） plasma at fluenc...Surface morphology and deuterium retention in ultrafine-grained tungsten fabricated by equal-channel angular pressing（ECAP） have been examined after exposure to a low energy,high-flux deuterium（D） plasma at fluences of 3×10^24 D/m^2 and 1×10^25 D/m^2 in a temperature range of 100 ℃-150 ℃.The methods used were scanning electron microscopy（SEM） and thermal desorption spectroscopy（TDS）.Sparse and small blisters（0.1 μm） were observed by SEM after D plasma irradiation on every irradiated surface;yet they did not exhibit significant structure or plasma fluence dependence.Larger blisters or protrusions appeared after subsequent TDS heating up to 1000 ℃.The TDS results showed a single D desorption peak at 220℃ for all samples and the D retention increased with increasing numbers of extrusion passes,i.e.,the decrease of grain sizes.The increased D retention in this low temperature range should be attributed to the faster diffusion of D along the larger volume fraction of grain boundaries introduced by ECAP.展开更多
文摘Microstructure evolution and texture development and their effects on mechanical properties of a Mg-Gd-Y-Zr alloy during equal channel angular pressing（ECAP） were investigated.It is found that the microstructure is still inhomogeneous after four passes,and two zones,namely the fine grain zone（FGZ） and the coarse grain zone（CGZ） are formed.The grain refinement occurs mainly by particle-stimulated nucleation（PSN） mechanism,which led to a more random texture after four passes of ECAP.In the ECAP-processed alloy,the strength did not increase while the ductility was enhanced dramatically compared with the as-received condition.The change of ductility of this alloy was discussed in terms of texture and second phase particles.
文摘Equal Channel Angular Pressing(ECAP)is one of the most applicable Sever Plastic Deformation(SPD)processes which leads to strength and ductility improvement through the grain refining and development of a suitable texture.In this study,after designing and manufacturing a suitable die,4 pass ECAP process at route C is done on strip shaped specimens of AZ31 magnesium alloy in order to achieve desirable microstructural and mechanical properties.Microstructure then got studied through the optical microscopy.Results show that mean grain size is decreased and grain size distribution got close to normal distribution state by increasing the pass number.However,the grain size is reduced by increasing of ECAP temperature.
基金Project(08JK240) supported by the Special Program of Education Bureau of Shaanxi Province, ChinaProject(SLGQD0751) supported by the Scientific Research Startup Program for Introduced Talents of Shaanxi University of Technology, China
文摘AZ31 Mg alloy bar was subjected to 8-pass equal-channel angular pressing(ECAP) at 623 K. Microstructure evolution was observed by optical microscopy(OM) on cross section and X-ray diffraction analysis. The room temperature mechanical properties of the ECAP processed specimens were also investigated. A fine-grained structure with an average sub-grain size of 9 μm is obtained after 7 ECAP passes. XRD analysis indicates that after ECAP,in placing of {1 010},planes {1 011} and {1 012} become the dominant directions that are favourable for grain refinement. ECAP processed AZ31 Mg alloy exhibits significant improvement in elongation but decrease in strength. The elongation of the specimen increases continuously up to 2 passes and then remains stable at further passes. This improvement can be related to the evolution of crystallographic texture and the scattered orientation of the basal plane(0001).
文摘Samples of a commercial Cu-lCr-0.1Zr(mass fraction,%) alloy were subjected to equal channel angular pressing(ECAP) up to 16 passes at room temperature following route Bc.Differential scanning calorimetry(DSC) was used to highlight the precipitation sequence and to calculate the stored energy,recrystallization temperature and activation energy after each ECAP pass.On another hand,electrical properties were correlated with the dislocation density.Results show that the stored energy increases upon increasing ECAP pass numbers,while the recrystallization temperature decreases significantly.
文摘Equal-channel angular pressing(ECAP) is now recognized as an effective technique for fabricating ultrafine grained materials. The results show that prevalent macroscopic shear banding occurs in ECAP as long as the pressing passes reach 2, and the severe macroscopic shear band extends from bottom to top surface and slants to the longitudinal axis of specimen at an angle of about 45°, develops at regular intervals, with a high shear strain accommodation of about 3.7 within the band. Different families of macroscopic shear bands may cut across each other, and over 60% of sample volume is occupied by macroscopic shear band when the ECAP reaches 4 passes.
基金The National Natural Science Foundation of China(No50474028)
文摘Equal channel angular pressing （ECAP） is an attractive process method to produce bulk uhra-fine grained materials. There are many experiment evidences showing that the nature of the microstructural evolution in multi-pass ECAP depends on process routes. Isothermal three dimensional FEM simulations for muhi-pass ECAP were performed using DEFORM3D finite element code. The material model of 6061A1-T6 was employed. Flow nets, effective strain distribution in the workpiece and loads during multi-pass ECAP using different routes were analysed respectively, The simulations show process routes influence material flow and effective strain distri- bution in the workpiece obviously but have few influence on loads.
文摘Among the various Severe Plastic Deformation(SPD)processes,Equal Channel Angular Pressing(ECAP)is one of the most applicable one which improves strength and ductility due to grain refinement and suitable texture development.In this study,cold rolling were carried out on the 4 pass ECAPed(in route A and C)strip shaped specimens of AZ31 magnesium alloy to investigate the ECAP effects on the roll-ability.Results showed that reduction in area which can be concerned as an index for roll-ability increased after ECAP.It was also seen that ECAP in route C enhanced roll-ability more than route A.
文摘Al-11%Si(mass fraction)alloy was transformed into a ductile material by equal-channel angular pressing(ECAP)with a rotary die.Two mechanisms at impact test,slip deformation by dislocation motion and grain boundary sliding,were discussed.The ultrafine grains with modified grain boundaries and the high content of fine particles(<1μm)were necessary for attaining high absorbed energy.The results contradict the condition of slip deformation by dislocation motion and coincide with that of grain boundary sliding.Many fine zigzag lines like a mosaic were observed on the side surface of the tested specimens.These observed lines may show grain boundaries appeared by the sliding of grains.
文摘The microstructural evolution of a recycled aluminum alloy after equal channel angular pressing （ECAP） up to four passes was investigated using X-ray diffxaction （XRD） analysis and transmission electron microscopy （TEM）. Microhardness tests were performed to determine the associated changes in mechanical properties. An ultrafine-grained material has been obtained with a microstructure showing a mixture of highly strained crystallites. A high density of dislocations was achieved as a result of severe plastic deformation （SPD） through the die. Changes in mechanical behavior are also revealed after ECAP due to strain hardening. Thermal analysis and TEM micrographs ob- tained after annealing indicate the succession of the recovery, recrystallization, and grain growth phenomena. Moreover, the energy stored during ECAP may be related to the dislocation density introduced by SPD. We finally emphasize the role played by the precipitates in this alloy.
文摘The extended band structures of as-cold-rolled high Cr steel sheets are recrystallisation-resistant, and tend to become aggregates of the so-called grain colonies as a partially recovered state after final annealing. Such band structures diminish formability and become origin of the so-called ridging. A novel processing will be shown here, which involves strain-path change by introducing one-pass ECAP prior to cold-rolling, and facilitates recrystallisation. Indeed, the recrystallisation temperature was reduced by 100℃, compared with cold-rolling alone imposing an equivalent strain. Grain- scale microshear bands introduced during one-pass ECAP perturbed the banded structures in post-ECAP cold-rolling and enhanced the recrystallisation at the final annealing.
基金Project(DMR-0968825)support by National Science Foundation Through Grant
文摘A review on severe plastic deformation（SPD） technique of equal channel angular pressing（ECAP） process of commercially pure titanium（CP-Ti） alloys was presented with a major emphasize on the influence of ECAP parameters that include channel and curvature angles, processing route, temperature of operation, pressing speed, internal heating, number of pass through the die and back pressure. Various ECAP characteristics such as microstructure, strain inhomogeneity and mechanical properties are considered to achieve the maximum homogeneity, equilibrium grain refinement and mechanical improvement of CP-Ti. Investigations show that a pressing speed of 1-3 mm/s at 450 °C with route BC along with channel and curvature angles of 90° and 20° respectively with backpressure can lead to the most homogeneous ultrafine microstructure.
基金supported by the National Magnetic Confinement Fusion Science Program of China(Nos.2013GB105001,2013GB105002,2015GB109001)National Natural Science Foundation of China(Nos.11305213,11405201)+1 种基金Technological Development Grant of Hefei Science Center of CAS(No.2014TDG-HSC003)China National Funds for Distinguished Young Scientists(No.51325103)
文摘Surface morphology and deuterium retention in ultrafine-grained tungsten fabricated by equal-channel angular pressing（ECAP） have been examined after exposure to a low energy,high-flux deuterium（D） plasma at fluences of 3×10^24 D/m^2 and 1×10^25 D/m^2 in a temperature range of 100 ℃-150 ℃.The methods used were scanning electron microscopy（SEM） and thermal desorption spectroscopy（TDS）.Sparse and small blisters（0.1 μm） were observed by SEM after D plasma irradiation on every irradiated surface;yet they did not exhibit significant structure or plasma fluence dependence.Larger blisters or protrusions appeared after subsequent TDS heating up to 1000 ℃.The TDS results showed a single D desorption peak at 220℃ for all samples and the D retention increased with increasing numbers of extrusion passes,i.e.,the decrease of grain sizes.The increased D retention in this low temperature range should be attributed to the faster diffusion of D along the larger volume fraction of grain boundaries introduced by ECAP.
