Project⁃based Pollutant Emission Control of Diesel Construction Equipment

This paper examines project⁃based policies and regulations implemented globally to control and mitigate emissions from diesel⁃powered construction equipment.This study systematically reviews and analyzes various managerial,regulatory,and technical measures adopted across countries and regions,mostly of advanced economy.Key strategies of control include setting emission thresholds,idling restrictions,perform remote online monitoring,operational time limits,setting low emission zones,and enforced registration systems.The review highlights the rationale,implementation details,and experiences gained from these localized approaches,reduces localized emission sources,improve urban air quality and environmental management efficiency.

An Intelligent Control Method for the Low-Carbon Operation of Energy-Intensive Equipment

Based on an analysis of the operational control behavior of operation experts on energy-intensive equipment,this paper proposes an intelligent control method for low-carbon operation by combining mechanism analysis with deep learning,linking control and optimization with prediction,and integrating decision-making with control.This method,which consists of setpoint control,self-optimized tuning,and tracking control,ensures that the energy consumption per tonne is as low as possible,while remaining within the target range.An intelligent control system for low-carbon operation is developed by adopting the end-edge-cloud collaboration technology of the Industrial Internet.The system is successfully applied to a fused magnesium furnace and achieves remarkable results in reducing carbon emissions.

Identifying Industrial Control Equipment Based on Rule Matching and Machine Learning

To identify industrial control equipment is often a key step in network mapping,categorizing network resources,and attack defense.For example,if vulnerable equipment or devices can be discovered in advance and the attack path canbe cut off,security threats canbe effectively avoided and the stable operationof the Internet canbe ensured.The existing rule-matching method for equipment identification has limitations such as relying on experience and low scalability.This paper proposes an industrial control device identification method based on PCA-Adaboost,which integrates rule matching and machine learning.We first build a rule base from network data collection and then use single andmulti-protocol rule-matchingmethods to identify the type of industrial control devices.Finally,we utilize PCA-Adaboost to identify unlabeled data.The experimental results show that the recognition rate of this method is better than that of the traditional Nmap device recognitionmethod and the device recognition accuracy rate reaches 99%.The evaluation effect of the test data set is significantly enhanced.

Modeling and Simulation of Equipment Material Inventory Control Based on System Dynamics

The paper discusses how the inventory control of army equipment material runs sytematically under the two-level maintenance system,and establishes the inventory control model based on system dynamics.On the basis of modeling and simulation,the influence of different inventory upper limit on the whole system is studied,and the optimal inventory control mechanism under the model condition is foud.In addition,through the simulation of two replenishment strategies(s,S) and(T,s,S),the advantages and disadvantages and feasibility of each replenishment strategy are analyzed.

The PLC Control System of Vacuum Resin Shot Dosing Equipment

The principle and working process of Vacuum Resin Shot Dosing Equipment(VRSDE) are analyzed and the characteristics of IP1612-220PLC (Programmable Logical Controller) areintroduced briefly at first. Then the authors discuss the flow of program, the assignment of PLCI/O ports, the wiring diagram, and the ladder logic program of the PLC control system of VRSDE indetail. Some application issues of the system are accounted for in addition. Finally, according tothe information acquired from users, the authors draw the conclusion: this system owns a highreliability and a-vailability and greatly improves the automatic degree of VRDE.

Dynamic Control System of Automatic Monitoring Equipment for Waste Gas Pollution Source

In order to improve the quality of automatic monitoring data of pollution sources and apply the automatic monitoring data to verify the environmental tax,Shandong Province took the lead in adopting the Internet of Things technology and drawing on the successful experience of air automatic monitoring stations and surface water automatic monitoring stations in management,and developed a dynamic management and control system for automatic monitoring equipment of pollution sources to improve and strengthen the quality audit of automatic monitoring data,further improve the quality of automatic monitoring data and better provide a basis for environmental management and decision making.The system realizes the simultaneous monitoring of monitoring data,running state and parameters of the automatic monitoring equipment,eliminates the phenomenon of falsification by modifying equipment parameters,and judges the validity of the collected data by acquiring the working state of the equipment remotely and randomly.After the actual operation test of the Department of Ecological Environment of Shandong Province,the system is proved to have the characteristics of practicality,real time and high efficiency,and be able to make up for low frequency and narrow coverage of manual inspection,with good application prospect in the field of environment and pollution source monitoring.

基于ECS-700系统宽融合多支持智能控制应用研究

通过分析ECS-700系统优势,得出ECS-700系统是能满足监控与管理、提高仪表控制系统可靠性,保障生产工艺安全的大型高端集散控制系统;针对兰州某公司水性科技产业园项目水性树脂标段中的电气自控工程实际情况,提出基于ECS-700系统的宽融合多支持智能控制应用方案,设计预处理车间和关键设备智能控制流程。结果表明该应用方案满足了生产和实际工程要求,系统安全可靠,极大地提高了维修效率和控制处理效率。

An Application of a Multivariable Self-Tuning Regulatorto the Control System of a Equipment Spare Parts

A discrete-dine control system model of equipment spare parts is proposed In this model,the stochastic demand, of the spare parts is described by the state equation disturbance. The controlpolicy of the system was deduced by means of the methods of a multivariable self-tuning regulatorand reduced-cud r state observer. An example was given in the end.

MODEL FOR CHAOS CONTROL OF REGIONAL Ec-R-Ev SYSTEM

In order to realize the coordination oriented management of the economy resource environment(Ec R Ev) composite system,its optimal aggregate coordinating measurement model is established.A self learning method is presented,which combines the optimizing technology and stability analysis together to achieve a tradeoff between the optimizing objective and system stability.So a model for chaos control of the composite system based on coordination is proposed.

Cold Chain Logistics Equipment Management and Control Based on Internet of Things

The status and supporting policies of cold chain logistics equipment man- agement and control in China were described. The connotation of Internet of Things and its impact on cold chain logistics equipment management and control were ana- lyzed from external form to internal nature. Through introducing the value chain and relevant equipments of cold chain logistics, the correlation between the main technologies in Internet of Things and the common indices for cold chain logistics equipment management and control was analyzed in detail. The application values of Internet of Things technologies in cold chain logistics equipment management and control were illustrated, including the sample analysis on the application of radio-frequency identification （RFID）. After the establishment of BSC performance evaluation index system of cold chain logistics equipment management and control, the optimization measures and suggestions on cold chain logistics equipment management and control under Internet of Things were put forward.

Distributed Model Predictive Load Frequency Control of Multi-area Power System with DFIGs

Reliable load frequency control LFC is crucial to the operation and design of modern electric power systems. Considering the LFC problem of a four-Area interconnected power system with wind turbines, this paper presents a distributed model predictive control DMPC based on coordination scheme. The proposed algorithm solves a series of local optimization problems to minimize a performance objective for each control area. The generation rate constraints GRCs, load disturbance changes, and the wind speed constraints are considered. Furthermore, the DMPC algorithm may reduce the impact of the randomness and intermittence of wind turbine effectively. A performance comparison between the proposed controller with and without the participation of the wind turbines is carried out. Analysis and simulation results show possible improvements on closed-loop performance, and computational burden with the physical constraints. © 2014 Chinese Association of Automation.

Tri-directional shaking table tests of vibration sensitive equipment with static dynamics interchangeable-ball pendulum system

Recently, the high-tech industry has become a key industry for economic development in many countries. However, vibration sensitive equipment located in these industrial buildings is vulnerable during earthquakes, which may cause huge economic loss. In this study, an innovative isolator for safeguarding the vibration sensitive equipment, namely, the static dynamics interchangeable^all pendulum system （SDI-BPS） is proposed and investigated to examine its protective capability for the vibration sensitive equipment during earthquakes through a series of tri-directional shaking table tests. The experimental results illustrate that the SDI-BPS isolator can provide significant damping to rolling types of base isolation systems for reducing the bearing displacement and size, and avoid the stress concentration, which can cause damage or scratches on the rolling surface of the isolator, to prolong its life span of service. The SDI-BPS isolator also provides excellent capability in protecting the vibration sensitive equipment and exhibits a stable behavior under long terms of service loadings and earthquakes.

CAutoCSD-Evolutionary Search and Optimisation Enabled Computer Automated Control System Design

This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of “computer-aided control system design” (CACSD) to novel “computer-automated control system design” (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency domains. Such performance-prioritised unification is aimed at relieving practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-commitment to such schemes. With recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytical and practical, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, and meets multiple objectives in the design of an LTI controller for a non-minimum phase plant and offers a high-performance LTI controller network for a non-linear chemical process.

A Systematic Approach for Designing Analytical Dynamics and Servo Control of Constrained Mechanical Systems

A systematic approach for designing analytical dynamics and servo control of constrained mechanical systems is proposed. Fundamental equation of constrained mechanical systems is first obtained according to Udwadia-Kalaba approach which is applicable to holonomic and nonholonomic constrained systems no matter whether they satisfy the D'Alember's principle. The performance specifications are modeled as servo constraints. Constraint-following servo control is used to realize the servo constraints. For this inverse dynamics control problem, the determination of control inputs is based on the Moore-Penrose generalized inverse to complete the specified motion. Secondorder constraints are used in the dynamics and servo control. Constraint violation suppression methods can be adopted to eliminate constraint drift in the numerical simulation. Furthermore, this proposed approach is applicable to not only fully actuated but also underactuated and redundantly actuated mechanical systems. Two-mass spring system and coordinated robot system are presented as examples for illustration. © 2014 Chinese Association of Automation.

中控ECS-700在烃类生产中的应用

ECS-700系统是浙江中控DCS系统在企业中应用较广泛的系统。该系统拥有集成化的系统结构和系统应用软件,并融合最新的现场总线技术和网络技术,可帮助用户及时获得工艺过程信息,提高自动化水平,降低维护成本,实现企业高效能。基于以上优势,在烃类生产中应用中控ECS-700系统。结合现场实际和相关资料,首先简单介绍ECS-700 DCS的系统结构,重点说明该系统在实际中的应用,如系统硬件配置、组态软件,功能块应用,列举一些特殊控制方案的组态方法。

基于ECS-700控制系统实现大型压缩机控制方式的探讨

在空分制氧行业,压缩机的稳定运行至关重要。基于ECS-700控制系统,介绍了压缩机导叶和放散阀三模型控制以及喘振控制策略,着重对喘振计数器、喘振控制逻辑进行了描述。

PLC技术的造纸机械设备自动控制系统设计与研究

新型造纸公司依托于高科技实现了生产流程的机械化和自动化,造纸行业的生产效率和效益都得到了提升。PLC技术在工业自动化生产中应用广泛,在造纸机械设备的应用有利于提高造纸设备的自动化运转,同时有助于提高产品的质量,节约产品的人力成本和时间成本等。对PLC技术进行了简要介绍,并讨论了其在造纸机械设备的应用的形式以及自动化设计系统的设计等,为造纸行业的进一步发展提供更多的技术支撑。

地下金属矿开采装备短间隔智能调度体系研究

作为矿山生产管理的重要内容,生产调度优化与管控可以充分利用产能、降低开采成本,因此成为现代矿山降本增效的有效手段。通过精细化调度管理和智能决策方法,实现复杂条件下的开采装备高效协同作业,充分提高调度管控效率和矿山生产能力,是现阶段矿山开采装备智能调度需要解决的关键问题。以地下金属矿山开采装备调度过程为研究对象,以提高开采装备的作业效率和生产能力为目的,研究了开采装备智能调度管控模式、决策支持算法和集成化应用。针对现代地下金属矿生产实时化、精准化与智能化管控的新需求,提出了开采装备短间隔智能调度新模式,形成了以“任务分解—任务配置—运输配置—作业指令—响应修正—分析反馈”为特征的短间隔闭环调度方案。设计了包括开采装备任务配置与调度优化算法、面向多级动态配矿的矿石流优化算法、无轨装备集群调度控制优化算法的智能化决策支持算法库,实现由人工经验到智能决策的转变。将开采装备短间隔智能调度体系进行综合示范应用,满足了现代矿山精细化管控和智能化决策需求。研究成果对于地下矿山开采装备作业过程的精细化管控与开采效率提升具有指导意义,同时也为现代地下金属矿山的生产调度管理提供了理论和方法支撑。

含汞油气田汞腐蚀与控制技术现状

介绍了含汞油气田在国内外的分布和汞含量的情况,以及汞在油气田中常见的存在形态与特性,阐述了金属及其合金的4种腐蚀破坏机理,系统调研了国内外汞及其化合物对油气田管道与设备的常见金属及其合金的腐蚀特征与控制技术研究与应用现状,提出今后需要加强含汞油气田腐蚀与污染及其防护的研究与应用的方向或问题。

化工装备与控制授课顺序的优化研究

化工装备与控制是中国石油大学化学工程与工艺专业和能源化学工程专业学生的必修课,其最大特点是知识点多且不成体系、课程内容与其它专业课联系不大。如果按照从“装备”到“控制”的顺序授课,则其难度由难到易陡降,使学生在学习过程中前期吃力、后期懈怠。为此,优化授课顺序,将从“装备”到“控制”改为从“控制”到“装备”,结合工程案例强化各章节内容之间的联系,则授课内容的难度顺序和逻辑联系更为合理,不仅有助于强化学生对本门课程的学习,还可使学生更好地掌握更多的相关工程知识。另外,所提出的逻辑顺序的优化对于分别开设“化工装备”和“化工仪表”的院校在课程安排上也有借鉴意义。