Abstraction of Small Signal Equivalent Circuit Parameters of Enhancement-Mode InGaP/AlGaAs/InGaAs PHEMT

An extraction method of the component parameter values of an enhancement-mode InGaP/AIGaAs/In-GaAs PHEMT small signal equivalent circuit is presented,and these component parameter values are extracted by using the EEHEMT1 model of IC-CAP software. The extraction results are verified by ADS software,and the DC I-V curves and S parameters simulated by ADS are basically accordant with those of the test results. These results indicate that the EEHEMT1 model can be used for extracting the component parameters of an enhancement-mode PHEMT.

RESEARCH ON EQUIVALENT PROCESSES OF ROCK MASS PARAMETERS WITH ANCHOR PILES

Using normal and shear rigid coefficients of intact rock and fracture plane, rigidly normal, shear equivalent rigid coefficients of fissure rock mass are conducted. On the basis of hypotheses of small displacement of rock mass, principle of superposition, irrelevance of strength parameters C and T and Coulomb theory, formulas to calculate equivalent strength parameters C and phi of equivalent continuous mass from fissured rock mass with anchor piles are given. The achievement is extremely valuable in integral stability analysis of the rock mass slope and important in promoting the research of the rock mass's constitutive relation.

In Situ Acquisition of Equivalent Circuit Parameters of Crystal Resonance during Copper Deposition and Dissolution in Acidic Solution by Electrochemical Quartz Crystal Impedance System

Electrochemical quartz crystal impedance system (EQCIS) which allows in situ dynamic quartz crystal impedance measurement in an electrochemical experiment was developed by combining an HP 4395A Network/Spectrum/Impedance analyzer with an EG&G M283 potentiostat. Equivalent circuit parameters of crystal resonance change significantly during electrodeposition and dissolution of copper in 0.1 mol/L H2SO4 aqueous solution in a cyclic potential sweep experiment, which is explained with an overall picture of mass loading, solution density and viscosity, etc..

Equivalent electromagnetic parameters for microwave metamaterial absorber using a new symmetry model

Transmission line theory uses the complex nature of permeability and permittivity of a conventional magnetic absorber to evaluate its absorption properties and mechanism. However, because there is no method to obtain the electromagnetic parameters of a metamaterial-absorber integrated layer(composed of a medium layer and a periodic metal array), this theory is seldom used to study the absorption properties of the metamaterial absorber. We propose a symmetry model to achieve an equivalent complex permittivity and permeability model for the integrated layer, which can be combined with the transmission line theory to calculate metamaterial absorption properties. The calculation results derived from both the transmission line theory and the high-frequency structure simulator are in good agreement. This method will be beneficial in practical investigations of the absorption mechanism of a metamaterial absorber.

The Equivalent Parameters of an Inclined Slot in Two Crossed Waveguides with Radiating Slots

The effect of longitudinal-offset radiating slots on a centered-inclined feeding slot in the common broad wall of the two crossed rectangular waveguides is analysed quantitatively. The corresponding equivalent parameters are computed by employing the moment method. The numerical results of resonant length of the feeding slot, VSWR and coupling parameter are showed and compared with the case of no radiating slots and short-end. The agreement between theory and experiment is good.

Predictive Elastoplastic Damage Constitutive Law: Establishment of Equivalence Relation between Intrinsic and Extrinsic Material Parameters

The purpose of the current work is the development and application of a new identification method of material parameters of elastoplastic damage constitutive model under large strains. A relationship relating the intrinsic and extrinsic parameters of a reference material is built and transformed in equivalence relation. Extrinsic parameters concern the shape of their experimental tensile force/elongation curve, however, intrinsic parameters deal with Swift hardening law coupled with an isotropic damage variable. The relationship is carried out from a statistical characterization of a material reference (standard-steel E24). It based on multiple linear regression of a data set obtained according to a full factor design of numerical simulations of mechanical tensile tests. All materials satisfying this equivalence relation belong to the same equivalence class. This is motivated by observing that gathered materials must behave somewhat like the reference material. The material parameters can be immediately identified by only one task by running the found relationship. The current method facilitates the identification procedure and offers a substantial savings in CPU time. However it just needs only one simulation for the identification of similar behavior instead of the few hundred required when using other methods.

Small-Signal Equivalent Circuit Modeling of a Photodetector Chip

A small-signal equivalent circuit model and the ted. The equivalent lumped circuit, which takes the main extraction techniques for photodetector chips are presen- factors that limit a photodetector＇s RF performance into consideration,is first determined based on the device＇s physical structure. The photodetector＇s S parameters are then on-wafer measured, and the measured raw data are processed with further calibration. A genetic algorithm is used to fit the measured data, thereby allowing us to calculate each parameter value of the model. Experimental resuits show that the modeled parameters are well matched to the measurements in a frequency range from 130MHz to 20GHz, and the proposed method is proved feasible. This model can give an exact description of the photodetector chip＇s high frequency performance,which enables an effective circuit-level prediction for photodetector and optoelectronic integrated circuits.

Equivalent Impedance Parameter Calculation of Three-phase Symmetrical Loads for Harmonic Source Location

The equivalent impedance parameters of loads have been widely used to identify and locate the harmonic sources.However,the existing calculation methods suffer from outliers caused by the zero-crossing of the denominator.These outliers can result in inaccuracy and unreliability of harmonic source location.To address this issue,this paper proposes an innovative method of equivalent impedance parameter calculation of three-phase symmetrical loads that avoid outliers.The correctness and effectiveness of the proposed method are verified by simulations on Simulink using actual monitoring data.The results show that the proposed method is not only simple and easy to implement but also highly accurate.

Simulation of second-order RC equivalent circuit model of lithium battery based on variable resistance and capacitance

With the rise of the electric vehicle industry,as the power source of electric vehicles,lithium battery has become a research hotspot.The state of charge(SOC)estimation and modelling of lithium battery are studied in this paper.The ampere-hour(Ah)integration method based on external characteristics is analyzed,and the open-circuit voltage(OCV)method is studied.The two methods are combined to estimate SOC.Considering the accuracy and complexity of the model,the second-order RC equivalent circuit model of lithium battery is selected.Pulse discharge and exponential fitting of lithium battery are used to obtain corresponding parameters.The simulation is carried out by using fixed resistance capacitance and variable resistance capacitor respectively.The accuracy of variable resistance and capacitance model is 2.9%,which verifies the validity of the proposed model.

Calculation Model of Equivalent Strength for Induced Crack Based on Double-K Fracture Theory and Its Optimizing Setting in RCC Arch Dam

By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.

Cosmological application on five-dimensional teleparallel theory equivalent to general relativity

A theory of（4＋1）-dimensional gravity has been developed on the basis of which equivalent to the theory of general relativity by teleparallel.The fundamental gravitational field variables are the 5-dimensional（5D） vector fields（pentad）,defined globally on a manifold M,and gravity is attributed to the torsion.The Lagrangian density is quadratic in the torsion tensor.We then apply the field equations to two different homogenous and isotropic geometric structures which give the same line element,i.e.,FRW in five dimensions.The cosmological parameters are calculated and some cosmological problems are discussed.

Dynamic Equivalent Method of Motor Loads for Power Systems Based on the Weighted

Dynamic equivalence can not only largely reduce the system size and the computation time but also stress the dominant features of the system [1]-[3]. This paper firstly recommends the basic concept of dynamic equivalent and the status of both domestic and abroad development in this area. The most existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors. In addition, the existing polymerization method which is based on the frequency domain algorithm of induction electric machines parameters takes a long time to equivalent for the large system, then the new method based on the weighted is proposed. Then, the basic steps for dynamic equivalence with the weighted method are introduced as follows. At first, the clustering criterion of motor loads based on time domain simulation is given. The motors with similar dynamic characteristics are classified into one group. Then, the simplication of the buses of motors in same group and network is carried out. Finally, parameters of the equivalent motor are calculated and the equivalent system is thus obtained based on the weighted. This aggregation method is applied to the simple distribution system of 4 generators. Simulation results show that the method can quickly obtain polymerization parameters of generator groups and the aggregation model retains the dynamic performance of the original model with good accuracy, the active and reactive power fitting error is smaller as well.

A New Approach to Calculate Parameters of Induction Generator with Double Windings

The accuracy prediction for the performance of an induction generator depends much on the parameters of the equivalent circuit. This paper presented a new way for calculating these parameters of induction generator with double windings. The method is based on 2D time-dependent magnetic field coupled with electric circuit. An application example of a 12-phase self-excited induction generator (SEIG) was provided to demonstrate the effectiveness of the presented approach. Some of the calculated results show good coincidence with the experiment values.

An Improved Parameters Extraction Method for Dumbbell-Shaped Defected Ground Structure

The paper presents an improved equivalent circuit parameters extraction method for the dumbbell-shaped defected ground structure (DGS). The new extraction parameters equations are obtained in closed-form expressions, which contain S11 and S21. The DGS unit with center frequency of 5 GHz is designed and fabricated on a TLX substrate with thickness of 1 mm and dielectric constant of 2.55. The circuit simulated results are in good agreement with the measured results. This parameters extraction method can be widely used for the design and analysis of DGS .

弱透水层瞬态水力参数的地质统计反演识别研究

弱透水层释水变形伴随着水力参数(渗透系数K和贮水率Ss)的瞬态变化,传统的“移动窗口”式反演方法假定每个反演窗口的初始状态是静态的,这与弱透水层释水变形存在明显滞后效应的实际情况不符。本文提出了在高维参数反演优化情境下,时间域上模型参数的动态变化可与空间域上模型参数的一维非均质性等价,因而可用地质统计反演方法可用于识别弱透水层瞬态K和Ss的新思路,实现了该方法在水文地质领域的创新性应用。以上海越流含水层系统为例,运用似线性地质统计反演算法,高精度地拟合了F16分层标处的长观变形数据,获取了原位透镜体状弱透水层K和Ss的瞬态特征。反演结果显示,观测时段内K的变幅为1.02×10^(-5)~5.89×10^(-4)m/a,平均值为1.38×10^(-4)m/a,Ss的变幅为4.34×10^(-4)~6.02×10^(-3)m^(-1),平均值为2.65×10^(-3)m^(-1)。基于反演所得参数瞬态特征,分析原位弱透水层在1994年前后分别以弹性和塑性变形为主,弱透水层K呈现与含水层水位相反的季节性变化特征,该现象可能与渗流力作用下细粒物质在含水层与弱透水层透镜体交界面附近的对孔隙的阻塞和疏通作用有关。该方法可获取完整观测时段内水文地质参数的动态变化轨迹,在计算评价地表水-地下水交互领域的河床渗透性、原位修复领域的渗透反应墙渗透性等的动态演化特征方面具有潜在的应用价值,并可作为构建水文地质领域、岩土工程等领域有关本构模型的有效辅助手段。

RPC应力-应变曲线系数与塑性损伤因子无量纲化计算模型研究

为了方便活性粉末混凝土(Reactive Powder Concrete,RPC)等效矩形应力图系数与塑性损伤因子的计算与取值,对RPC应力-应变曲线系数与塑性损伤因子的计算模型进行了理论研究。通过对现有的计算方法进行无量纲化转化,推导了决定计算模型的四个原函数条件;对一个实际的应力-应变关系进行了计算,将得到的结果进行了分析;并对受弯矩形梁非极限状态下截面内力和力矩的推定计算进行了演示。针对应力-应变关系式含有非整次有理分式的情况提出了曲线拟合方法;研究了拟合次数、拟合区间和拟合函数类型对拟合精度与稳定性的影响。比较了4种典型的RPC本构模型在同种材料下的应力-应变曲线系数与损伤因子取值模型曲线,结果显示:拟合曲线得到的取值模型与其他原始曲线得到的取值模型在曲线上具有较高的相似度,证明了曲线拟合方法的准确可靠性;最后给出了一种RPC受压应力-应变曲线系数与塑性损伤因子无量纲化取值模型。

新型零泊松比蜂窝结构的等效弹性参数分析

在四角星形蜂窝结构的基础上,提出了一种新型零泊松比蜂窝结构。采用结构基因方法分析研究了蜂窝结构的等效弹性参数,并对结果进行了精细化模型有限元仿真验证;进而分析了蜂窝结构单胞尺寸参数对于结构等效弹性参数的影响。结果表明,结构基因法在进行蜂窝结构等效弹性参数预测时具有较高的正确性与效率性;蜂窝结构尺寸参数对结构的等效弹性参数影响很大,与原材料模量相比,蜂窝结构的面内模量会降低(1~2)个数量级。最后,通过与四角星形蜂窝结构进行对比发现,新型蜂窝结构可以保证较为稳定的零泊松比特性,而且在面内变形能力以及抵抗面外变形能力优于四角星形蜂窝结构,具有在变体飞机中的良好应用前景。

基于HPPC-FFRLS的锂电池等效模型参数在线辨识

目的为了实现锂离子动力电池的高精度状态监测与分析,方法针对锂离子动力电池二阶RC等效电路模型的参数在线辨识展开研究。搭建锂离子动力电池二阶RC等效电路模型;利用开路电压法与安-时积分算法相结合的方式进行电池荷电状态(SOC)评估;通过HPPC测试实验数据进行等效电路模型的离线参数辨识;以离线辨识结果作为系统状态初值,结合带遗忘因子的递推最小二乘算法(FFRLS)对锂离子动力电池二阶RC等效电路模型参数进行在线辨识;利用Simulink搭建电池状态监测和充放电控制仿真系统,对基于在线辨识参数的模型进行仿真测试;利用可编程电源和电子负载搭建实验平台。结果对比在线辨识参数的系统仿真输出、离线辨识参数的系统仿真输出和实验数据,结果表明:基于HPPC-FFRLS在线辨识的模型仿真输出的误差相对于HPPC实验法减小了50%;在线辨识策略克服了环境温度、电池老化、充放电倍率等因素对参数的影响;仿真初期系统波动明显减小,等效模型系统动态跟踪具有更高的精度,鲁棒性更好。结论基于HPPC-FFRLS的锂电池等效模型在线辨识保证了模型参数的有效性,简化运算量的同时提高了模型精度。

同轴多层筒式空心线圈自感和互感解析计算方法

在电磁耦合的无线电能传输系统中,准确获取线圈电感参数是设计和优化无线电能传输系统的重要理论依据。现有的无线电能传输系统研究大多针对平面板结构线圈,同轴多层筒式空心线圈相比于平面板线圈具有更高的传输功率和传输效率。因此,该文针对同轴多层筒式空心线圈,提出了一种考虑高频涡流效应的自感和互感解析计算方法。首先,将单匝线圈截面离散等效为数量众多、形状相同的网格带电圆环单元,采用离散等效求和法推导出单匝线圈的自感和线圈间互感的解析式;然后,基于筒式空心线圈的整体结构以及考虑高频涡流效应,推导出基于第一类、第二类完全椭圆积分和开尔文函数的一、二次线圈自感和总互感计算的理论解析式;最后,以两种不同排布方式的筒式空心线圈为例,对比解析计算、有限元计算和实验测量结果,验证了所提解析法的可行性,同时也为筒式空心线圈的设计提供参考依据。

等价无穷小的若干性质

给出了反函数、参数方程确定的函数以及隐函数等价无穷小的若干性质,丰富了等价无穷小的理论,有一定的理论价值和应用价值.