Crustal thicknesses and Poisson's ratios beneath the Chuxiong-Simao Basin in the Southeast Margin of the Tibetan Plateau

In the Southeast Margin of the Tibetan Plateau, low-velocity sedimentary layers that would significantly affect the accuracy of the H-κ stacking of receiver functions are widely distributed.In this study, we use teleseismic waveform data of 475 events from 97 temporary broadband seismometers deployed by ChinArray Phase I to obtain crustal thicknesses and Poisson's ratios within the Chuxiong-Simao Basin and adjacent area, employing an improved method in which the receiver functions are processed through a resonance-removal filter, and the H-κ stacking is time-corrected.Results show that the crustal thickness ranges from 30 to 55 km in the study area, reaching its thickest value in the northwest and thinning toward southwest, southeast and northeast.The apparent variation of crustal thickness around the Red River Fault supports the view of southeastern escape of the Tibetan Plateau.Relatively thin crustal thickness in the zone between Chuxiong City and the Red River Fault indicates possible uplift of mantle in this area.The positive correlation between crustal thickness and Poisson's ratio is likely to be related to lower crust thickening.Comparison of results obtained from different methods shows that the improved method used in our study can effectively remove the reverberation effect of sedimentary layers.

Thermally insulating and fire-retardant bio-mimic structural composites with a negative Poisson's ratio for battery protection

Battery safety has attracted considerable attention worldwide due to the rapid development of wearable electronics and the steady increase in the production and use of electric vehicles.As battery failures are often associated with mechanical-thermal coupled behaviors,protective shielding materials with excellent mechanical robustness and flame-retardant properties are highly desired to mitigate thermal runaway.However,most of the thermal insulating materials are not strong enough to protect batteries from mechanical abuse,which is one of the most critical scenarios with catastrophic consequences.Here,inspired by wood,we have developed an effective approach to engineer a hierarchical nanocomposite via self-assembly of calcium silicate hydrate and polyvinyl alcohol polymer chains(referred as CSH wood).The versatile protective material CSH wood demonstrates an unprecedented combination of light weight(0.018 g cm-3),high stiffness(204 MPa in the axial direction),negative Poisson's ratio(-0.15),remarkable toughness(6.67×105 J m-3),superior thermal insulation(0.0204 W m-1 K-1 in the radial direction),and excellent fire retardancy(UL94-V0).When applied as a protective cover or a protective layer within battery packages,the tough CSH wood can resist high-impact load and block heat diffusion to block or delay the spread of fire,therefore significantly reducing the risk of property damage or bodily injuries caused by battery explosions.This work provides new pathways for fabricating advanced thermal insulating materials with large scalability and demonstrates great potential for the protection of electronic devices.

Determination of water equivalent ratio for some dosimetric materials in proton therapy using MNCPX simulation tool

The water equivalent ratio(WER) was calculated for polypropylene(PP), paraffin, polyethylene(PE), polystyrene(PS), polymethyl methacrylate(PMMA), and polycarbonate materials with potential applications in dosimetry and medical physics. This was performed using the Monte Carlo simulation code, MCNPX, at different proton energies. The calculated WER values were compared with National Institute of Standards and Technology(NIST) data, available experimental and analytical results,as well as the FLUKA, SRIM, and SEICS codes. PP and PMMA were associated with the minimum and maximum WER values, respectively. Good agreement was observed between the MCNPX and NIST data. The biggest difference was 0.71% for PS at 150 MeV proton energy. In addition, a relatively large positive correlation between the WER values and the electron density of the dosimetric materials was observed. Finally, it was noted that PE presented the most analogous Depth Dose Characteristics to liquid water.

Statics, vibration, and buckling of sandwich plates with metamaterial cores characterized by negative thermal expansion and negative Poisson's ratio

This paper proposes a three-dimensional(3D)Maltese cross metamaterial with negative Poisson’s ratio(NPR)and negative thermal expansion(NTE)adopted as the core layers in sandwich plates,and aims to explore the relations between the mechanical responses of sandwich composites and the NPR or NTE of the metamaterial.First,the NPR and NTE of the metamaterial are derived analytically based on energy conservation.The effective elastic modulus and mass density of the 3D metamaterial are obtained and validated by the finite element method(FEM).Subsequently,the general governing equation of the 3D sandwich plate under thermal environments is established based on Hamilton’s principle with the consideration of the von Kármán nonlinearity.The differential quadrature(DQ)FEM(DQFEM)is utilized to obtain the numerical solutions.It is shown that NPR and NTE can enhance the global stiffness of sandwich structures.The geometric parameters of the Maltese cross metamaterial significantly affect the responses of the thermal stress,natural frequency,and critical buckling load.

Research on Dynamic and Static Test Methods for Evaluating the Poisson's Ratio of Orien ted Strand Board

In this article,dynamic method and static method of testing Poisson's ratio of OSB(Oriented Strand Board)were proposed.Through modal and static numerical analyses,the position where the transverse stress is equal to zero was determined.The binary linear regression method was applied to express the gluing position of the strain gauge as a relational express ion that depended on the length-width ratio and width-thickness ratio of the canti-lever plate.Then the longitudinal and transverse Poisson's ratios of OSB were mea sured by the given dynamic and static methods.In addition,the test results of OSB Poisson's ratio were analyzed with the probability distribution of random variables.The results showed that using the proposed dynamic method and static method,the test results for longitudinal and transverse Poisson's ratios of OSB were quite consistent,despite the gluing position of the strain gauges being different.And these OSB Poisson's ratios were accorded with that obtained by the axial tensile method and the four-point bending method.OSB longitudinal and transverse Poisson's ratios followed Weibull distribution.

Switchable hidden spin polarization and negative Poisson's ratio in two-dimensional antiferroelectric wurtzite crystals

Two-dimensional(2D)antiferroelectric materials have raised great research interest over the last decade.Here,we reveal a type of 2D antiferroelectric(AFE)crystal where the AFE polarization direction can be switched by a certain degree in the 2D plane.Such 2D functional materials are realized by stacking the exfoliated wurtzite(wz)monolayers with“self-healable”nature,which host strongly coupled ferroelasticity/antiferroelectricity and benign stability.The AFE candidates,i.e.,Zn X and Cd X(X=S,Se,Te),are all semiconductors with direct bandgap atΓpoint,which harbors switchable antiferroelectricity and ferroelasticity with low transition barriers,hidden spin polarization,as well as giant in-plane negative Poisson's ratio(NPR),enabling the co-tunability of hidden spin characteristics and auxetic magnitudes via AFE switching.The 2D AFE wz crystals provide a platform to probe the interplay of 2D antiferroelectricity,ferroelasticity,NPR,and spin effects,shedding new light on the rich physics and device design in wz semiconductors.

Upper crustal Poisson's ratio and coda-wave attenuation beneath Eastern Anatolia

The attenuation of seismic waves reflects the elastic nature of the media within which the waves propagate.In this study,we calculate the Coda-Q(Qc),frequency dependence(η),Vp/Vs and Poisson's(υ)ratios by using 2621 vertical component seismograms generated by 987 earthquakes recorded by 13 seismic stations in Eastern Anatolia,and creat a 2-D seismic tomographic Qc model for the region.The obtained model provides significant information for exploring the boundaries of adjacent tectonic units within the upper crust and interpreting their dynamic characteristics.The 2-D Qc model and the other parameters are consistent with the seismotectonic features of Eastern Anatolia.Highly heterogeneous Qc values are observed in the study area dividing it into north-south directed bands of low and high attenuation.The highestηvalues were obtained beneath the northwestern and eastern parts of the study region.Clear,high and lowυvalues are obtained in the western and eastern parts of the study area,respectively.The spatial variations in the measured parameters are consistent with many geophysical observations including low Pn velocities,efficient Sn blockage,high heat flow,and widespread volcanism.Different upper crustal thicknesses and inhomogeneous stress distribution along the East and North Anatolian Fault Zones may also contribute to the observed heterogeneities.

Machine learning-based stiffness optimization of digital composite metamaterials with desired positive or negative Poisson's ratio

Mechanical metamaterials such as auxetic materials have attracted great interest due to their unusual properties that are dictated by their architectures.However,these architected materials usually have low stiffness because of the bending or rotation deformation mechanisms in the microstructures.In this work,a convolutional neural network(CNN)based self-learning multi-objective optimization is performed to design digital composite materials.The CNN models have undergone rigorous training using randomly generated two-phase digital composite materials,along with their corresponding Poisson's ratios and stiffness values.Then the CNN models are used for designing composite material structures with the minimum Poisson's ratio at a given volume fraction constraint.Furthermore,we have designed composite materials with optimized stiffness while exhibiting a desired Poisson's ratio(negative,zero,or positive).The optimized designs have been successfully and efficiently obtained,and their validity has been confirmed through finite element analysis results.This self-learning multi-objective optimization model offers a promising approach for achieving comprehensive multi-objective optimization.

Study of crustal thickness and poisson's ratio of the south of Erenhot area by teleseismic receiver function

The Xing’an Mongolian Orogenic Belt(XMOB) and the northern margin of North China Craton(NCC) have undergone multistage tectonic superimposition and the tectonic evolution is extremely complicated. We collect the teleseismic data of 44 temporary broadband seismic stations deployed in the XMOB and the northern margin of NCC to calculate the P wave receiver functions. The crustal thickness and average crustal ratio as well as the Poisson’s ratios beneath 33 stations are estimated using the H-κ stacking method. The results show:(1) the crustal thickness of the study area ranges from 38.7 to 42.7 km, with an average thickness of 41.2 km. There is a great difference in crustal thickness on both sides of Solonker suture zone. The characteristics of crustal thickness support the geodynamic model that the Paleo-Asian Ocean subducted and closed at the Solonker suture zone.(2) The Poisson’s ratios in the study area are low, ranging from 0.215 to 0.277, with an average value of 0.243, suggesting that the rock composition of the area is dominated by felsic-acid rocks.(3) There exists a negative correlation between the Poisson’s ratio and the crustal thickness. Combined with the lower values of Poisson’s ratio, we speculate that the delamination is the major mechanism in crustal extension and thinning in the study area.

Cost-Effective Monitoring of the Fuel Air Equivalence-Ratio with a Lambda Sensor and a Microcontroller in a Downdraft Biomass Gasifier

The operation of biomass treatment devices such as gasifiers is based on the control of key parameters that play an important role in product formation. These include: temperature, excess oxygen, relative humidity and biomass composition. This work focuses on excess oxygen and temperature. Unfortunately, flue gas oxygen analyzers are expensive and not accessible to small industries. However, the equivalence ratio is linked to excess oxygen and has the advantage of not depending on biomass composition. This study therefore focuses on the design and development of a device for controlling this equivalence ratio by measuring oxygen concentration using a self-propelled Lambda probe, and a system for monitoring this equivalence ratio using an Arduino Uno 3 microcontroller. The temperature is recorded with an accuracy of ±1.5°C. For a heating time of 10 minutes, the response time to temperature change is around 3 seconds, which is sufficient for the device to function properly. This simple device is an efficient and cost-effective means of checking the equivalence ratio.

The MDOF equivalent linear system and its applications in seismic analysis and design of framed structures

This paper reviews the applications of the multi degree-of-freedom(MDOF)equivalent linear system in seismic analysis and design of planar steel and reinforced concrete framed structures.An equivalent MDOF linear structure,analogous to the original MDOF nonlinear structure,is constructed,which has the same mass and elastic stiffness as the original structure and modal damping ratios that account for the effects of geometrical and material nonlinearities.The equivalence implies a balance between the viscous damping work of the equivalent linear structure and that of the nonlinearities in the original nonlinear structure.This work balance is established with the aid of a transfer function in the frequency domain.Thus,equivalent modal damping ratios can be explicitly determined in terms of the period and deformation levels of the structure as well as the soil types.Use of these equivalent modal damping ratios can help address a variety of seismic analysis and design problems associated with planar steel and reinforced concrete framed structures in a rational and accurate manner.These include force-based seismic design with the aid of acceleration response spectra characterized by high amounts of damping,improved direct displacement-based seismic design and the development of advanced seismic intensity measures.The equivalent modal damping ratios are also utilized in the context of linear modal analysis for the definition and construction of the MDOF response spectrum.Furthermore,the equivalent modal damping ratios are employed in a seismic retrofit method for steel-framed structures with viscous dampers.Finally,it is demonstrated that modal behavior(or strength reduction)factors can be easily constructed based on these modal damping ratios for a more rational and accurate force-based seismic design,including the determination of inelastic displacement profiles.

基于小尺寸模型分析氢氧旋转爆轰波传播的不稳定性机制

氢氧的高反应活性给旋转爆轰波的稳定传播带来了巨大的挑战,为研究氢氧旋转爆轰波传播不稳定性,通过改变当量比对小尺寸模型下二维氢氧旋转爆轰波进行数值模拟研究,揭示了氢氧旋转爆轰波复杂多变的传播特性,并分析了典型流场结构,探讨了传播模态的不稳定性以及爆轰波湮灭和再起爆机制。结果表明:随着当量比的提高,流场内分别呈现熄爆、单波、单双波混合3种传播模态,且爆轰波的传播速度随当量比的增大几乎呈线性提高,速度亏损为5%~8%。激波的扰动使得爆燃面失稳产生明显的扭曲和褶皱,氢氧的高反应活性让爆燃面明显分层且在2个分界面上呈现不同的不稳定性,上分界面为Kelvin-Helmholtz(K-H)不稳定性,下分界面为Rayleigh-Taylor(R-T)不稳定性。单双波混合模态下爆轰波极不稳定,保持湮灭、单波、双波对撞3种状态之间循环。爆轰波有2种湮灭方式:一是双波对撞导致爆轰波湮灭,二是爆燃面燃烧加剧使得爆燃面下移导致爆轰波湮灭。再起爆的主要原因是:R-T不稳定性诱导爆轰产物与新鲜预混气在爆燃面上相互挤压产生尖峰和气泡结构,增强爆燃面上的反应放热,产生了局部热点并逐渐增强为爆轰波,实现爆燃转爆轰。

Correlation between the rock mass properties and maximum horizontal stress:A case study of overcoring stress measurements

Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution method.The results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with depth.There is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and messy.Moreover,there is no obvious relationship between the rock quality designation(RQD)and depth.The maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same depth.In addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper,the kerosene/air rotating detonation engines(RDE)are numerically investigated,and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation,instabilities,and propulsive performance.A hybrid MPI t OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC)systems.A series of cases with the total pressure of 1 MPa,1.5 MPa,2 MPa,and the equivalence ratio of 0.9,1,1.4 are simulated.On one hand,the total pressure shows a significant impact on the instabilities of rotating detonation waves.The instability phenomenon is observed in cases with low total pressure(1 MPa)and weakened with the increase of the total pressure.The total pressure has a small impact on the detonation wave velocity and the specific impulse.On the other hand,the equivalence ratio shows a negligible influence on the instabilities,while it affects the ignition process and accounts for the detonation velocity deficit.It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition.Little difference was observed in the thrust with different equivalence ratios of 0.9,1,and 1.4.The highest specific impulse was obtained in the lean fuel cases,which is around 2700 s.The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.

Effect of equivalence ratio on diesel direct injection spark ignition combustion

Aviation heavy-fuel spark ignition(SI)piston engines have been paid more and more attention in the area of small aviation.Aviation heavy-fuel refers to aviation kerosene or light diesel fuel,which is safer to use and store compared to gasoline fuel.And diesel fuel is more suitable for small aviation application on land.In this study,numerical simulation was performed to evaluate the possibility of switching from gasoline direct injection spark ignition(DISI)to diesel DISI combustion.Diesel was injected into the cylinder by original DI system and ignited by spark.In the simulation,computational models were calibrated by test data from a DI engine.Based on the calibrated models,furthermore,the behavior of diesel DISI combustion was investigated.The results indicate that diesel DISI combustion is slower compared to gasoline,and the knock tendency of diesel in SI combustion is higher.For a diesel/air mixture with an equivalence ratio of 0.6 to 1.4,higher combustion pressure and faster burning rate occur when the equivalence ratios are 1.2 and 1.0,but the latter has a higher possibility of knock.In summary,the SI combustion of diesel fuel with a rich mixture can achieve better combustion performance in the engine.

Investigation of block foundations resting on soil-rock and rock-rock media under coupled vibrations

In the present study,the dynamic response of block foundations of different equivalent radius to mass（R;/m） ratios under coupled vibrations is investigated for various homogeneous and layered systems.The frequency-dependent stiffness and damping of foundation resting on homogeneous soils and rocks are determined using the half-space theory.The dynamic response characteristics of foundation resting on the layered system considering rock-rock combination are evaluated using finite element program with transmitting boundaries.Frequencies versus amplitude responses of block foundation are obtained for both translational and rotational motion.A new methodology is proposed for determination of dynamic response of block foundations resting on soil-rock and weathered rock-rock system in the form of equations and graphs.The variations of dimensionless natural frequency and dimensionless resonant amplitude with shear wave velocity ratio are investigated for different thicknesses of top soil/weathered rock layer.The dynamic behaviors of block foundations are also analyzed for different rock-rock systems by considering sandstone,shale and limestone underlain by basalt.The variations of stiffness,damping and amplitudes of block foundations with frequency are shown in this study for various rock—rock combinations.In the analysis,two resonant peaks are observed at two different frequencies for both translational and rotational motion.It is observed that the dimensionless resonant amplitudes decrease and natural frequencies increase with increase in shear wave velocity ratio.Finally,the parametric study is performed for block foundations with dimensions of 4 m × 3 m × 2 m and 8m×5m×2m by using generalized graphs.The variations of natural frequency and peak displacement amplitude are also studied for different top layer thicknesses and eccentric moments.

An Analytical Theory of the Signal-to-Noise Ratio of Hall Plates with Four Contacts and a Single Mirror Symmetry

This work gives an analytical theory of the signal-to-thermal-noise ratio (SNR) of classical Hall plates with four contacts at small magnetic field. In contrast to previous works, the symmetry of the Hall plates is reduced to only a single mirror axis, whereby the average of potentials of the two output contacts off this mirror axis differs from the average of potentials at the two supply contacts on the mirror axis, i.e. the output common mode differs from 50%. Surprisingly, at fixed power dissipated in the Hall plate, the maximum achievable SNR is only 9% smaller for output common modes of 30% and 70% when compared to the overall optimum at output common modes of 50%. The theory is applied to Vertical Hall effect devices with three contacts on the top surface and one contact being the buried layer in a silicon BiCMOS process. Geometries are found with large contacts and only a moderate loss in SNR.

Apparent velocity estimation with P-SV ratio method

The apparent velocity of the incident wave is an important parameter for simulating rotational ground motion with theoretical methods, but it is difficult to estimate effectively when there is only a single record. This paper discusses a P-SV ratio method based on elastodynamic theory in a multi-layer isotropic elastic half space. The apparent velocities of four earthquakes in the SMART1 array are calculated with this method. The result is close to a method that uses travel time analysis. Furthermore, the factors that impact the apparent velocity and equivalent incident angle are considered according to records from the Chi-Chi earthquake. There is no obvious relationship between the equivalent incident angle and epicenter distance. However, the equivalent incident angle is obviously dependent on the site conditions.

基于相对等效短路比的新能源——柔直送出系统振荡风险评估

新能源基地并网系统面临与电压支撑强度密切相关的振荡稳定性问题,在海量运行方式下,逐一建立精细化模型的稳定性分析过程耗时较长。短路比指标可直观反映新能源并网系统的电压支撑强度和稳定裕度,但现有短路比无法适用于无同步机电源的系统。为此,将短路比概念合理扩展至全电力电子化系统,基于戴维南等效网络来度量新能源-柔直送出系统电压支撑强度,进而提出了能快速评估新能源-柔直送出系统振荡风险的相对等效短路比计算方法,并阐明相对等效短路比能够全面考虑新能源场站发电功率、交流网架结构以及新能源设备变流控制系统等多重因素对振荡稳定性的影响,最后通过算例验证了相对等效短路比评估方法的有效性。

当量比分层压燃的火焰发展特性与控制机制

针对柴油机当量比分层充量压缩着火的可控性问题,基于OpenFOAM平台构建了一维分层充量自燃及火焰发展的理论模型,在压力为6MPa、温度为850 K工况条件下,研究了当量比分层压缩燃烧过程的基本特征和控制机制,以及当量比分层策略对燃烧过程的调控作用.结果表明:当量比分层压燃早期的组分扩散对化学反应影响较大,中期主要受化学反应和压力波耦合后的共同控制,而后期化学反应和压力波解耦,主要受化学反应控制,压力波影响较小;小负荷工况(整体当量比为0.3)下通过组织合理的充量分层可以使50%放热对应的时间从1.312 ms缩短到0.685 ms,燃烧速度提高近1倍,而大负荷工况(整体当量比为0.7)下可以通过部分分层策略将50%放热对应的时间从0.357 ms延长到0.477 ms.