The highest similarity degree of static characteristics including both horizontal and vertical restoring force-displacement characteristics of total mooring system, as well as the tension-displacement characteristics ...The highest similarity degree of static characteristics including both horizontal and vertical restoring force-displacement characteristics of total mooring system, as well as the tension-displacement characteristics of the representative single mooring line between the truncated and full depth system are obtained by annealing simulation algorithm for hybrid discrete variables (ASFHDV, in short). A“baton” optimization approach is proposed by utilizing ASFHDV. After each baton of optimization, if a few dimensional variables reach the upper or lower limit, the boundary of certain dimensional variables shall be expanded. In consideration of the experimental requirements, the length of the upper mooring line should not be smaller than 8 m, and the diameter of the anchor chain on the bottom should be larger than 0.03 m. A 100000 t turret mooring FPSO in the water depth of 304 m, with the truncated water depth being 76 m, is taken as an example of equivalent water depth truncated mooring system optimal design and calculation, and is performed to obtain the conformation parameters of the truncated mooring system. The numerical results indicate that the present truncated mooring system design is successful and effective.展开更多
The oil industry is now increasingly concentrating their efforts and activities in connection with de- veloping fields in deeper waters, ranging typically from 500 m to 3000 m worldwide. However, the modeling of a ful...The oil industry is now increasingly concentrating their efforts and activities in connection with de- veloping fields in deeper waters, ranging typically from 500 m to 3000 m worldwide. However, the modeling of a full-depth system has become difficult presently; no tank facility is sufficiently large to perform the testing of a complete FPS with compliant mooring in 1000 m to 3000 m depth, within rea- sonable limits of model scale. Until recently, the most feasible procedure to meet this challenge seems to be the so-called "hybrid model testing technique". To implement this technique, the first and im- portant step is to design the equivalent water depth truncated mooring system. In this work, the opti- mization design of the equivalent water depth truncated mooring system in hybrid model testing for deep sea platforms is investigated. During the research, the similarity of static characteristics between the truncated and full depth system is mainly considered. The optimization mathematical model for the equivalent water depth truncated system design is set up by using the similarity in numerical value of the static characteristics between the truncated system and the full depth one as the objective function. The dynamic characteristic difference between the truncated and full depth mooring system can be minished by selecting proper design rule. To calculate the static characteristics of the mooring system, the fourth order Runge-Kutta method is used to solve the static equilibrium equation of the single mooring line. After the static characteristic of the single mooring line is calculated, the static charac- teristic of the whole mooring system is calculated with Lagrange numerical interpolation method. The mooring line material database is established and the standard material name and the diameter of the mooring line are selected as the primary key. The improved simulated annealing algorithm for continual & discrete variables and the improved complex algorithm for discrete variables are employed to per- form the optimization calculation. The C++ programming language is used to develop the computer program according to the object-oriented programming idea. To perform the optimization calculation with the two algorithms mentioned above respectively and the better result is selected as the final one. To examine the developed program, an example of equivalent water depth truncated mooring system optimum design calculation on a 100,000-t, turret mooring FPSO in water depth of 320 m are performed to obtain the conformation parameters of the truncated mooring system, in which the truncated water depth is 160 m. The model test under some typical environment conditions are performed for both the truncated and the full depth system with model scale factor λ=80. After comparing the corresponding results from the test of the truncated system with those from the full depth system test, it’s found that the truncated mooring system design in this work is successful.展开更多
In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the socalled "passively-truncated + numerical-simulation" type of hybrid model testing technique while the tn...In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the socalled "passively-truncated + numerical-simulation" type of hybrid model testing technique while the tnmcated water depth is 160 m and the model scale ), = 80. During the investigation, the optimization design of the equivalent-depth truncated system is performed by using the similarity of the static characteristics between the truncated system and the full depth one as the objective function. According to the truncated system, the corresponding physical test model is made. By adopting the coupling time domain simulation method, the tnmcated system model test is numerically reconstructed to carefully verify the computer simulation software and to adjust the corresponding hydrodynamic parameters. Based on the above work, the numerical extrapolation to the full depth system is performed by using the verified computer software and the adjusted hydrodyrmmic parameters. The full depth system model test is then performed in the basin and the results are compared with those from the numerical extrapolation. At last, the implementation procedure and the key technique of the hybrid model testing of the deep-sea platforms are summarized and printed. Through the above investigations, some beneficial conclusions are presented.展开更多
基金supported by the Natural Science Foundation of Zhejiang Province(Grant No.Y6110243)the Open Fund Project of Second Institute of Oceanography(Grant No.SOED1208)+1 种基金the Major Projects of the National Science and Technology(Grant No.2009ZX07424-001)the Special Program for the Science and Technology Plan of Zhejiang Province of China(Grant No.2009C13016)
文摘The highest similarity degree of static characteristics including both horizontal and vertical restoring force-displacement characteristics of total mooring system, as well as the tension-displacement characteristics of the representative single mooring line between the truncated and full depth system are obtained by annealing simulation algorithm for hybrid discrete variables (ASFHDV, in short). A“baton” optimization approach is proposed by utilizing ASFHDV. After each baton of optimization, if a few dimensional variables reach the upper or lower limit, the boundary of certain dimensional variables shall be expanded. In consideration of the experimental requirements, the length of the upper mooring line should not be smaller than 8 m, and the diameter of the anchor chain on the bottom should be larger than 0.03 m. A 100000 t turret mooring FPSO in the water depth of 304 m, with the truncated water depth being 76 m, is taken as an example of equivalent water depth truncated mooring system optimal design and calculation, and is performed to obtain the conformation parameters of the truncated mooring system. The numerical results indicate that the present truncated mooring system design is successful and effective.
基金Supported by the National Natural Science Foundation of China (Grant No. 10602055)Natural Science Foundation of Zhejiang Province (Grant No. Y6110243)
基金Supported by the National Natural Science Foundation of China (Grant Nos. 10602055 and 40776007) the Natural Science Foundation of China Jiliang University (Grant No. XZ0501)
文摘The oil industry is now increasingly concentrating their efforts and activities in connection with de- veloping fields in deeper waters, ranging typically from 500 m to 3000 m worldwide. However, the modeling of a full-depth system has become difficult presently; no tank facility is sufficiently large to perform the testing of a complete FPS with compliant mooring in 1000 m to 3000 m depth, within rea- sonable limits of model scale. Until recently, the most feasible procedure to meet this challenge seems to be the so-called "hybrid model testing technique". To implement this technique, the first and im- portant step is to design the equivalent water depth truncated mooring system. In this work, the opti- mization design of the equivalent water depth truncated mooring system in hybrid model testing for deep sea platforms is investigated. During the research, the similarity of static characteristics between the truncated and full depth system is mainly considered. The optimization mathematical model for the equivalent water depth truncated system design is set up by using the similarity in numerical value of the static characteristics between the truncated system and the full depth one as the objective function. The dynamic characteristic difference between the truncated and full depth mooring system can be minished by selecting proper design rule. To calculate the static characteristics of the mooring system, the fourth order Runge-Kutta method is used to solve the static equilibrium equation of the single mooring line. After the static characteristic of the single mooring line is calculated, the static charac- teristic of the whole mooring system is calculated with Lagrange numerical interpolation method. The mooring line material database is established and the standard material name and the diameter of the mooring line are selected as the primary key. The improved simulated annealing algorithm for continual & discrete variables and the improved complex algorithm for discrete variables are employed to per- form the optimization calculation. The C++ programming language is used to develop the computer program according to the object-oriented programming idea. To perform the optimization calculation with the two algorithms mentioned above respectively and the better result is selected as the final one. To examine the developed program, an example of equivalent water depth truncated mooring system optimum design calculation on a 100,000-t, turret mooring FPSO in water depth of 320 m are performed to obtain the conformation parameters of the truncated mooring system, in which the truncated water depth is 160 m. The model test under some typical environment conditions are performed for both the truncated and the full depth system with model scale factor λ=80. After comparing the corresponding results from the test of the truncated system with those from the full depth system test, it’s found that the truncated mooring system design in this work is successful.
基金This work was financially supported by the National Natural Science Foundation of China (Grant No10602055)Nature Science Foundation of China Jiliang University (Grant No XZ0501)
文摘In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the socalled "passively-truncated + numerical-simulation" type of hybrid model testing technique while the tnmcated water depth is 160 m and the model scale ), = 80. During the investigation, the optimization design of the equivalent-depth truncated system is performed by using the similarity of the static characteristics between the truncated system and the full depth one as the objective function. According to the truncated system, the corresponding physical test model is made. By adopting the coupling time domain simulation method, the tnmcated system model test is numerically reconstructed to carefully verify the computer simulation software and to adjust the corresponding hydrodynamic parameters. Based on the above work, the numerical extrapolation to the full depth system is performed by using the verified computer software and the adjusted hydrodyrmmic parameters. The full depth system model test is then performed in the basin and the results are compared with those from the numerical extrapolation. At last, the implementation procedure and the key technique of the hybrid model testing of the deep-sea platforms are summarized and printed. Through the above investigations, some beneficial conclusions are presented.