This research was conducted at the sand dunes stabilization research s tation in Baiji district, Iraq. Three techniques for sand dunes stabilization ar e selected: the first method is stabilization by clayey block ba...This research was conducted at the sand dunes stabilization research s tation in Baiji district, Iraq. Three techniques for sand dunes stabilization ar e selected: the first method is stabilization by clayey block barriers; the seco nd method is stabilization by dry planting of tamarix (tamarix articulata) cutti ngs and the third is stabilization by using cane branch barriers. Randomized sam ples were taken from the surface and subsurface layers of the stabilized and shi fting sand dunes to evaluate the effect of the three techniques on wind erosion parameters. The results indicate high significant differences between the wind e rosion parameters in the surface and subsurface layers in the stabilized sand du nes, while there are insignificant differences between the subsurface layer of t he stabilized dunes and the surface and subsurface layers in the active sand dun es. The results clarify the fact that there is an increase in the percentage of clay, silt, organic matter, mean weight diameter and the percentage of the dry a ggregates (>0.84 mm). A decrease is found in the rate of disaggregation for the dry aggregates in the samples of the surface layer of stabilized dunes when comp ared with the subsurface layer of stabilized dunes and the surface layer of the shifting sand dunes. There is a positive high significant correlation among the aggregate stability parameters and the percentage of clay and silt, and the cont ent of organic matter in the studied layers.展开更多
The velocity profiles and separation efficiency curves of a hydrocyclone were predicted by an Euler-Euler approach using a computational fluid dynamics tool ANSYS-CFX 14.5. The Euler-Euler approach is capable of consi...The velocity profiles and separation efficiency curves of a hydrocyclone were predicted by an Euler-Euler approach using a computational fluid dynamics tool ANSYS-CFX 14.5. The Euler-Euler approach is capable of considering the particle-particle interactions and is appropriate for highly laden liquid-solid mixtures. Pre- dicted results were compared and validated with experi- mental results and showed a considerably good agreement. An increase in the particle cut size with increasing solid concentration of the inlet mixture flow was observed and discussed. In addition to this, the erosion on hydrocyclone walls constructed from stainless steel 410, eroded by sand particles （mainly SiOz）, was predicted with the Euler-La- grange approach. In this approach, the abrasive solid particles were traced in a Lagrangian reference frame as discrete particles. The increases in the input flow velocity, solid concentration, and the particle size have increased the erosion at the upper part of the cylindrical body of the hydrocyclone, where the tangential inlet flow enters the hydrocyclone. The erosion density in the area between the cylindrical to conical body area, in comparison to other parts of the hydrocyclone, also increased considerably. Moreover, it was observed that an increase in the particle shape factor from 0.1 to 1.0 leads to a decrease of almost 70 % in the average erosion density of the hydrocyclone wall surfaces.展开更多
文摘This research was conducted at the sand dunes stabilization research s tation in Baiji district, Iraq. Three techniques for sand dunes stabilization ar e selected: the first method is stabilization by clayey block barriers; the seco nd method is stabilization by dry planting of tamarix (tamarix articulata) cutti ngs and the third is stabilization by using cane branch barriers. Randomized sam ples were taken from the surface and subsurface layers of the stabilized and shi fting sand dunes to evaluate the effect of the three techniques on wind erosion parameters. The results indicate high significant differences between the wind e rosion parameters in the surface and subsurface layers in the stabilized sand du nes, while there are insignificant differences between the subsurface layer of t he stabilized dunes and the surface and subsurface layers in the active sand dun es. The results clarify the fact that there is an increase in the percentage of clay, silt, organic matter, mean weight diameter and the percentage of the dry a ggregates (>0.84 mm). A decrease is found in the rate of disaggregation for the dry aggregates in the samples of the surface layer of stabilized dunes when comp ared with the subsurface layer of stabilized dunes and the surface layer of the shifting sand dunes. There is a positive high significant correlation among the aggregate stability parameters and the percentage of clay and silt, and the cont ent of organic matter in the studied layers.
基金“Stiftung Rheinland-Pfalz fur Innovation,Mainz,Germany,”for financial support
文摘The velocity profiles and separation efficiency curves of a hydrocyclone were predicted by an Euler-Euler approach using a computational fluid dynamics tool ANSYS-CFX 14.5. The Euler-Euler approach is capable of considering the particle-particle interactions and is appropriate for highly laden liquid-solid mixtures. Pre- dicted results were compared and validated with experi- mental results and showed a considerably good agreement. An increase in the particle cut size with increasing solid concentration of the inlet mixture flow was observed and discussed. In addition to this, the erosion on hydrocyclone walls constructed from stainless steel 410, eroded by sand particles （mainly SiOz）, was predicted with the Euler-La- grange approach. In this approach, the abrasive solid particles were traced in a Lagrangian reference frame as discrete particles. The increases in the input flow velocity, solid concentration, and the particle size have increased the erosion at the upper part of the cylindrical body of the hydrocyclone, where the tangential inlet flow enters the hydrocyclone. The erosion density in the area between the cylindrical to conical body area, in comparison to other parts of the hydrocyclone, also increased considerably. Moreover, it was observed that an increase in the particle shape factor from 0.1 to 1.0 leads to a decrease of almost 70 % in the average erosion density of the hydrocyclone wall surfaces.
