Monitoring Study of Long-Term Land Subsidence during Subway Operation in High-Density Urban Areas Based on DInSAR-GPS-GIS Technology and Numerical Simulation

During subway operation,various factors will cause long-term land subsidence,such as the vibration subsidence of foundation soil caused by train vibration load,incomplete consolidation deformation of foundation soil during tunnel construction,dense buildings and structures in the vicinity of the tunnel,and changes in water level in the stratum where the tunnel is located.The monitoring of long-term land subsidence during subway operation in high-density urban areas differs from that in low-density urban construction areas.The former is the gathering point of the entire urban population.There are many complex buildings around the project,busy road traffic,high pedestrian flow,and less vegetation cover.Several existing items requiremonitoring.However,monitoring distance is long,and providing early warning is difficult.This study uses the 2.8 km operation line between Wulin Square station and Ding’an Road station of Hangzhou Subway Line 1 as an example to propose the integrated method of DInSAR-GPS-GIS technology and the key algorithm for long-term land subsidence deformation.Then,it selects multiscene image data to analyze long-termland subsidence of high-density urban areas during subway operation.Results show that long-term land subsidence caused by the operation of Wulin Square station to Ding’an Road station of Hangzhou Subway Line 1 is small,with maximumsubsidence of 30.64 mm,and minimumsubsidence of 11.45 mm,and average subsidence ranging from 19.27 to 21.33 mm.And FLAC3D software was used to verify the monitoring situation,using the geological conditions of the soil in the study area and the tunnel profile to simulate the settlement under vehicle load,and the simulation results tended to be consistent with the monitoring situation.

Research of BIM Technology in Urban Rail Operation and Maintenance and Application

With the rapid development of urban rail transit,the traditional operation and maintenance methods mainly rely on manpower,and the pressure on equipment operation and maintenance is increasing,and the low work efficiency,high intensity and high operating costs have always been the main problems at this stage.Through BIM visualization technology can effectively solve those problems,the operation and maintenance mode of urban rail signal equipment at this stage is discussed,the integration and visualization of BIM technology are used to make the judgments and early warnings on the maintenance of urban rail signal equipment,and play a positive and important role in operation and maintenance work,this research result can provide ideas and references for urban rail transit operation and maintenance in the new era.

Technical development of operational in-situ marine monitoring and research on its key generic technologies in China

In China,operational in-situ marine monitoring is the primary means of directly obtaining hydrological,meteorological,and oceanographic environmental parameters across sea areas,and it is essential for applications such as forecast of marine environment,prevention and mitigation of disaster,exploitation of marine resources,marine environmental protection,and management of transportation safety.In this paper,we summarise the composition,development courses,and present operational status of three systems of operational in-situ marine monitoring,namely coastal marine automated network station,ocean data buoy and voluntary observing ship measuring and reporting system.Additionally,we discuss the technical development in these in-situ systems and achievements in the key generic technologies along with future development trends.

Review and Prospect of Research on Structural Health Monitoring Technology for Bridges

As a crucial infrastructure in the transport system,the safe operation of bridges is directly related to all aspects of people’s daily lives.The development of bridge structural health monitoring technology and its application play an important role in ensuring the safety and extending the service life of bridges.This paper carries out in-depth research and analysis on the related technology of bridge structural health monitoring.Firstly,the existing monitoring technologies at home and abroad are sorted out,and the advantages and problems of various methods are compared and analyzed,including nondestructive testing,stress measurement,vibration characteristic identification,and other commonly used monitoring technologies.Secondly,the key technologies and equipment in the bridge health monitoring system,such as sensor technology,data acquisition,and processing technology,are introduced in detail.Finally,the development trend in the field of bridge health monitoring is prospected from both theoretical research and technical application.In the future,with the development of emerging technologies such as big data,cloud computing,and the Internet of Things,it is expected that bridge health monitoring with intelligent and systematic features will be more widely applied to provide a stronger guarantee for the safe and efficient operation of bridges.

Operational procedures of auricular point sticking technology

As an external treatment technique of traditional Chinese medicine(TCM),auricular point sticking,which is rooted in holographic biology theory and TCM viscera and meridian theory,is a safe and effective treatment method.This article introduces the technology overview and development process.The auricular point sticking technique for constipation is taken as an example to specify the basic requirements,assessment,operational points,acupoint selection and matters needing attention during the implementation of the auricular acupressure technique,providing a reference for the operating procedures of this technique in the clinical treatment of other diseases such as insomnia,diarrhea,colds,hypertension,headache,and dysmenorrhea.

Research on the Database Technology under the Operation of the IOT Huge Amounts of Data

In this paper, we conduct research on the database technology under the basic operation of the IOT huge amounts of data. Spatial data service is the process of basic customer application system service request, directory service system according to the request is mapped into physical addresses, according to the data block physical disk server address block of data read from the disk in parallel and sent to the client the process of application system. In addition, spatial data distribution system should possess unloading, transfer, replication, and optimization of spatial data, and other functions, to achieve comprehensive management and maintenance of spatial data. Under this basis, we propose the enhanced database technology that optimizes the operation with better performance.

Transformation of Operations Management through Information Technology and Information System in Suning

Information technology and information system today play major roles in companies who are competitive in the global market. In this paper, we will study how Suning Appliance Chain changes her operations by using information technology and information system. Suning's Strategy, operations structure, especially her logistics system are discussed firstly; how information technology and information system support her operation and logistics to gain competitive capabilities are further discussed. Finally, the operation system transformation through IT/IS in Suning is studied by the use of a stochastic inventory model.

Production base of annual 3000 tons sintered NdFeB of SinoMagnetics Technology goes into operation

Sino magnetics technology is a high-tech enterprise specializing in R&D and production of rare earth permanent magnet materials.It is reported that the enterprise has accelerated the construction of annual3000 tons of high performance sintered NdFeB production base,and the construction of the base has been completed and put into use.

Design of Hygienic Support System & Research of Correlative Technology during Qinghai-Tibet Railway Operation

According to 4 aspects, including effect of plateau climate and environment on human health, epidemic characteristics of natural focal disease on Qinghai-Tibet plateau, supplying condition of drinking water resources and managing mode of Qinghai-Tibet railway operation, this paper does research on main facing problems of hygienic support work during Qinghai-Tibet railway operation. It also represents if hygienic support work needs to reach zero death object, it must follow up the overall thinking that people oriented, management centric, equipment as base and environment as condition. It makes design of stratification and structure of hygienic support system, and makes a detailed discussion of mutual dependent relations, status and effect of each factor existed in stratification and structure. It discusses the key technologies and presents suggestions. The key technologies include checkup appraisal mode used for plateau traveling staffs to ensure the hygienic support system go on wheels, the scheme of pressure oxygen supplying and new wind rate exchange for plateau passenger trains, information transport system used for Qinghai-Tibet railway hygienic support, and medical rescue preparatory scheme for accidental accidents [1-3] .

An Intelligent Control Method for the Low-Carbon Operation of Energy-Intensive Equipment

Based on an analysis of the operational control behavior of operation experts on energy-intensive equipment,this paper proposes an intelligent control method for low-carbon operation by combining mechanism analysis with deep learning,linking control and optimization with prediction,and integrating decision-making with control.This method,which consists of setpoint control,self-optimized tuning,and tracking control,ensures that the energy consumption per tonne is as low as possible,while remaining within the target range.An intelligent control system for low-carbon operation is developed by adopting the end-edge-cloud collaboration technology of the Industrial Internet.The system is successfully applied to a fused magnesium furnace and achieves remarkable results in reducing carbon emissions.

IMPACT OF OPERATING COSTS ON INVESTMENT STRATEGIES IN NEW TECHNOLOGY ADOPTION WITH A FURTHER NEW TECHNOLOGY ANTICIPATED

The adoption of new technologies often represents a crucial component of firms＇ investment decisions. This paper studies a dynamic duopoly model in which two firms compete in adoption of current technology with a further new technology anticipated. Here it is assumed that the operating costs are not zero which has more explanatory power of the real world. There exist three kinds of equilibria that may occur in adoption of current technology, which mainly depends on the level of operating costs and the first-move advantage. It shows that the faster technological substitution or innovation encourages the leader to invest earlier while induces the follower to invest later. Furthermore,like the investment costs,with the increase of operating costs the follower tends to invest later while the leader tends to invest earlier ,the investment thresholds are more sensitive to the change of operating costs than that of investment costs.

Experimental investigation on the invert stability of operating railway tunnels with different drainage systems using 3D printing technology

In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure(EWP). By means of a threedimensional(3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system(TDS) widely used in China and its optimized drainage system(ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice,including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 k Pa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.

Technical operation specification for cupping therapy

Cupping,as one of the characteristic therapies of traditional Chinese medicine,has been applied for more than 2000 years and has a unique curative effect in clinic.With the evolution of the times,the types and operation techniques of cupping method are also iterating.In the process of its inheritance and development,cupping technology is also known by more and more people.Starting from the development and efficacy of cupping method,this paper introduces the clinical operation steps and precautions of cupping method in detail,and lists the representative diseases such as lumbar muscle strain,herpes zoster,and ankylosing spondylitis,to provide reference for clinical application.

Technical operation specification for pricking-cupping therapy

Pricking-cupping therapy is a Traditional Chinese Medicine(TCM)nursing technology that can adjust the viscera of the human body,make the meridians smooth,and Yin and Yang balanced mainly by means of relieving heat and detoxification,harmonizing Qi and blood,promoting blood circulation and removing blood stasis,dredging meridians and activating collaterals,reducing swelling and pain,purging heat and calming shock,clearing heat,and opening orifices.Pricking-cupping therapy has a long history and wide application.After thousands of years of development,it has made great progress.They are widely used to treat lumbar disc herniation,herpes zoster,acute arthritis,migraine,and other diseases in China.Through the clinical practice and theoretical exploration of physicians of past dynasties,the therapeutic mechanism and application scope of pricking-cupping therapy have been greatly enriched.Modern TCM practitioners have conducted in-depth researches on the operation norms of the therapy on the basis of the ancients,hoping to grasp the essence of the disease more accurately and make the rational use of the operation technology of the therapy.

Operational Performance Evaluation of Corn Processing Industry Technological Innovation Alliance Based on Survey Data in Heilongjiang Province

This paper selected the corn processing industry technology innovation alliance in Heilongjiang Province as the research object, evaluated the operational performance of the alliance by using analytic hierarchy process(AHP) and fuzzy comprehensive evaluation methods. AHP empirical results showed that the satisfaction of information communication and the satisfaction of the management process were the weakest. And the order from high to low on the level of indicators of the impact for the alliance was the result of alliance operations and the process of alliance operations, the behavioral attitude of alliance members. Besides, the results of fuzzy comprehensive evaluation showed that the operational performance of the corn processing industry technology innovation alliance in Heilongjiang Province was in the general level.

Technological Innovation: An Assessment of Operational Practices of Small and Medium Textile Enterprises in Ghana

Fundamentally, technology is the key to achieving a competitive advantage. Novel and advanced technologies and manufacturing systems have turned the attention of labour-intensive firms towards technological attractiveness. In the textile industry, advancements in technology and products are massive. The study sought to assess the extent to which managers of Small and Medium Textile Enterprises (STMEs) are taking advantage of the technology available in textile designing, production and marketing space, as there is a growing interest worldwide to boost the innovative activity of enterprises, especially technological innovation. The study is quantitative research. A multi-stage sampling procedure involving convenient, purposive and stratified sampling techniques was employed in this study. A sample size of 300 was drawn from the 80 SMTEs. The study discovered that most of the textile enterprises in Ghana mostly use computer-generated designs, manual screen printing and digital embroidery technologies in their production. The study also established that SMTEs continually resort to traditional advertising techniques rather than contemporary marketing and advertising mediums for marketing their products. In view of this, SMTEs should seek more knowledge regarding innovative contemporary marketing strategies to increase patronage.

Overview of Key Technologies for Remote Wireless Operation Platform on Water Surface

The underwater environment is complicated and full of hazards,making it tough to complete with just one piece of underwater operation equipment.Building a high-speed,low-latency wireless connection between a remote wireless operation platform on water surface and other operation platforms in order to achieve long-distance transmission of high-definition image data and control commands,as well as collaborative operations among multiple platforms,has become a development trend and focus of exploring complex and dangerous waters.This paper summarizes and elaborates on underwater communication technology,long-distance data transmission technology,multi-submersible robot collaborative operation,and information interaction technology,as well as the development status of key technologies of remote wireless operation platform on water surface.And the research direction and focus of the remote wireless operation platform on water surface are prospected.

Progress in high-speed train technology around the world

This is a review of high-speed train development in the sense of technology advances all over the world. Three generations of high-speed trains are classified according to their technical characteristics and maximum operating speed. Emphasis is given to the newly developed high-speed train in China, CRH380. The theoretical foundations and future development of CRH380 are briefly discussed.

Research on the Integration of BIM Technology in Prefabricated Buildings

Today we are in a technologically explosive information society. The cross- border integration of manufacturing and construction is prefabricated buildings. The cross-border integration of construction and IT is BIM technology, and the emergence of BIM technology provides new ideas for prefabricated building, and the integration of prefabricated building and BIM technology realizes the construction industrialization. This paper studies the application of BIM technology in prefabricated buildings, including the design phase, construction and assembly phase, operation and maintenance phase, and application analysis of related software, so as to improve the high efficiency, high quality and high precision development of prefabricated projects, and promote domestic green environmental protection. The development of the construction industry provides reference value for the application of BIM technology in prefabricated buildings.