Overwhelming low ammonia escape and low temperature denitration efficiency via MnOx-decorated two-dimensional MgAl layered double oxides

Low temperature catalysts are attracting increasing attention in the selective catalytic reduction(SCR)of NO with NH3.Mn Ox-decorated Mg Al layered double oxide(Mn/Mg Al-LDO)was synthesized via a facile fast pour assisted co-precipitation(FP-CP)process.Compared to the Mn/Mg Al-LDO obtained via slow drop assisted coprecipitation(SD-CP)method,the Mn/Mg Al-LDO(FP-CP)has excellent activity.The Mn/Mg Al-LDO(FP-CP)catalyst was shown to possess a high NO conversion rate of 76%-100%from 25 to 150℃,which is much better than the control Mn/Mg Al-LDO(SD-CP)(29.4%-75.8%).In addition,the Mn/Mg Al-LDO(FP-CP)offered an enhanced NO conversion rate of 97%and a N2selectivity of 97.3%at 100℃;the NO conversion rate was 100%and the N2selectivity was 90%at 150℃with a GHSV of 60,000 h^-1.The Mn/Mg Al-LDO(FP-CP)catalyst exhibited a smaller fragment nano-sheet structure(sheet thickness of 7.23 nm).An apparent lattice disorder was observed in the HRTEM image confirming the presence of many defects.The H2-TPR curves show that the Mn/Mg Al-LDO(FP-CP)catalyst has abundant reducing substances.Furthermore,the enhanced surface acidity makes the NH3concentration of the Mn/Mg Al-LDO(FP-CP)catalyst lower than 100 ml·m^-3after the reaction from 25 to 400℃.This can effectively reduce the ammonia escape rate in the SCR reaction.Thus,the Mn/Mg Al-LDO(FP-CP)catalyst has potential applications in stationary industrial installations for environmentally friendly ultra-low temperature SCR.

Parameter Optimization on Experimental Study to Reduce Ammonia Escape in CO_2 Absorption by Ammonia Scrubbing

In order to research ammonia escape in CO2 absorption by ammonia scrubbing,ammonia escape was studied in CO2 absorption process using the bubbling reactor in different conditions as gas flow rate,CO2 ratio,absorbent temperature and ammonia concentration and quantity of escaped ammonia was measured by chemical titration. The results indicated that,the amount of ammonia escape can be around 20% of original amount in90 min and the escaped amount will increase with the rise of gas flow rate, absorbent temperature,concentration of ammonia while decrease as CO2 ratio goes up. Through the analysis of the law of ammonia escape,at the same time,combined with ammonia escape and the influence of the relationship between the CO2 absorption efficiency,reducing ammonia escape working condition parameter optimization is given.