Alkali and Plasma-Treated Guadua angustifolia Bamboo Fibers:A Study on Reinforcement Potential for Polymeric Matrices

This study focuses on treating Guadua angustifolia bamboo fibers to enhance their properties for reinforcement applications in composite materials.Chemical(alkali)and physical(dry etching plasma)treatments were used separately to augment compatibility of Guadua angustifolia fibers with various composite matrices.The influence of these treatments on the fibers’performance,chemical composition,and surface morphology were analyzed.Statistical analysis indicated that alkali treatments reduced the tensile modulus of elasticity and strength of fibers by up to 40%and 20%,respectively,whereas plasma treatments maintain the fibers’mechanical performance.FTIR spectroscopy revealed significant alterations in chemical composition due to alkali treatments,while plasma-treated fibers showed minimal changes.Surface examination through Scanning Electron Microscopy(SEM)revealed post-treatment modifications in both cases;alkali treatments served as a cleanser,eliminating lignin and hemicellulose from the fiber surface,whereas plasma treatments also produce rough surfaces.These results validate the impact of the treatments on the fiber mechanical performance,which opens up possibilities for using Guadua angustifolia fibers as an alternative reinforcement in composite manufacturing.

The pseudocapacitance mechanism of graphene/CoAl LDH and its derivatives:Are all the modifications beneficial?

Cobalt-Aluminum layered double hydroxide(CoAl LDH) is a hopeful electrode material due to the advantage of easy modifiability for preparing LDH-based derivatives.However,there is short of modification methods to prepare the Co-based derivatives from CoAl LDH and also short of an intuitive perspective to analyze the pseudocapacitance mechanism of CoAl LDH and its derivatives.Herein,Graphene/CoAl LDH and its derivatives including Graphene/CoS,Graphene/CoS-1,Graphene/CoOOH,Graphene/CoP were prepared by reasonably using alkali etching treatment,sulfofication and phosphorization.The specific capacitance of Graphene/CoAl LDH,Graphene/CoS,Graphene/CoS-1,Graphene/CoOOH,Graphene/CoP at1 A g^(-1) are 260.7,371.3,440.8,61.4 and 122.2 F g^(-1),especially.The pseudocapacitance mechanism of Graphene/CoAl LDH and its derivatives was analyzed.Due to the positive effect of sulfofication on the electrical conductivity of GO and cobalt sulfide,the Graphene/CoS and Graphene/CoS-1 exhibit the optimal electrochemical performance and superior rate capability.In addition,due to the repulsion effect between Graphene and OH-,the Graphene/CoAl LDH exhibits optimal cycling stability of 224.1% capacitance retention after 20000 cycles.Besides,the reason of terrible specific capacitance of Graphene/CoOOH is that the presence of H bond in interlayer of CoOOH inhibits the interaction between Co3+ and OHspecies.Hence,not all modifications will increase the specific capacitance of the electrode materials.Overall,this work provides us with a detailed analysis of the electrochemical mechanism and correlation of CoAl LDH and its derivatives from the perspective of crystal structure and composition.

Fabrication of Micro/Nano-textured Titanium Alloy Implant Surface and Its Infl uence on Hydroxyapatite Coatings

We put forward a protocolcombining laser treatment and acid etching to obtain multiscale micro/nano-texture surfaces of titanium alloy implant.Firstly,the operationalparameters of the laser were optimized to obtain an optimum current.Secondly,the laser with the optimum operationalparameters was used to fabricate micro pits.Thirdly,multiple acid etching was used to clean the clinkers of micro pits and generate submicron and nanoscale structures.Finally,the bioactivity of the samples was measured in a simulated body fluid.The results showed that the micropits with a diameter of 150 μm and depth of 50 μm were built successfully with the optimized working current of 13 A.In addition,submicron and nanoscale structures,with 0.5-2 μm microgrooves and 10-20 nm nanopits,were superimposed on micro pits surface by multiple acid etching.There was thick and dense HA coating only observed on the multiscale micro/nano-textured surface compared with polished and micro-textured surface.This indicated that the multiscale micro/nano-texture surface showed better ability toward HA formation,which increased the bioactivity of implants.