Reaction pathways and selectivity in the chemo-catalytic conversion of cellulose and its derivatives to ethylene glycol:A review

Biomass-to-ethylene glycol is an effective means to achieve high-value utilisation of cellulose but is hindered by low conversion efficiency and poor catalyst activity and stability.Glucose and cellobiose are derivatives of cellulose conversion to ethylene glycol,and it is found that studying the reaction process of both can help to understand the reaction mechanism of cellulose.It is desirable to develop a reusable,highly active catalyst to convert cellulose into ethylene glycol.This ideal catalyst might have one or more active sites described the conversion steps above.Here,we discuss the catalyst development of celluloseto-ethylene glycol,including tungsten,tin,lanthanide,and other transition metal catalysts,and special attention is given to the reaction mechanism and kinetics for preparing ethylene glycol from cellulose,and the economic advantages of biomass-to-ethylene glycol are briefly introduced.The insights given in this review will facilitate further development of efficient catalysts,for addressing the global energy crisis and climate change related to the use of fossil fuels.

Preparation and Thermo-Responsive Properties of Poly(Oligo(Ethylene Glycol)Methacrylate)Copolymers with Hydroxy-Terminated Side Chain

Thermo-responsive random copolymers,poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-(ethylene glycol)methyl ether methacrylate)(P(EO_(2)-co-EO_(4/5)))and poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-ethylene glycol methacrylate(P(EO2-co-EG4/5))are synthesized via atom transfer radical polymerization(ATRP).The successful synthesis and the narrow polydispersity index(PDI)of two copolymers are indicated by 1H nuclear magnetic resonance(1H-NMR)and gel permeation chromatography(GPC)analyses.The transition behaviors of polymers in the aqueous solution are demonstrated by changes in turbidity and particle sizes.The transition behavior of P(EO2-co-EG4/5)is found to be milder than that of P(EO2-co-EO4/5).Moreover,the presence of hydrogen bonds without thermo-responsive properties established by hydroxyl groups in the end-side chain of P(EO_(2)-co-EG_(4/5))hinders the dehydration at the transition temperature(TT).Attenuated total reflection Fourier transform infrared spectrometry(ATR-FTIR)analysis along with contact angle measurements reveals that both P(EO_(2)-co-EO_(4/5))and P(EO_(2)-co-EG_(4/5))films undergo phase transitions from hydrophilicity to hydrophobicity above TT.By examining the swelling and collapse behaviors of the polymer films during phase transitions,it can be concluded that the end hydroxyl groups may establish hydrogen bonds with neighboring ether groups within the films,which remain intact throughout the phase transition process due to their strong bonding interactions.This leads to an increase in steric hindrance within swollen films thereby impeding dehydration processes and inducing hysteresis during phase transitions.

Analysis of Ethylene Glycol Degumming Process and Characterization of Hemp Fibers

To overcome the shortcomings of traditional degumming process,an efficient and environmentally friendly ethylene glycol(EG) degumming process was adopted to degum hemp fibers.The surface morphology,chemical composition,chemical structures,and mechanical properties of the fiber samples were analyzed to explore the mechanism of the degumming process.It was found that the EG degumming process could be divided into the main degumming stage(heating) and the supplementary degumming stage(insulation).The removal rates of hemicellulose and lignin in the main degumming stage were 70.56% and 60.17%,respectively.In the supplementary degumming stage,9.95% hemicellulose and 25.39% lignin were removed.It is confirmed that EG can separate hemp fibers effectively with less damage,which holds great potential for the biomass fiber separation technology.

Study of Thermal,Phase Morphological and Mechanical Properties of Poly(L-lactide)-b-Poly(ethylene glycol)-b-Poly(L-lactide)/Poly(ethylene glycol)Blend Bioplastics

A poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide)(PLLA-PEG-PLLA)block copolymer has great potential for use as a flexible bioplastic.Highly flexible bioplastics are required for flexible packaging applications.In this work,a PEG was incorporated into block copolymer as a plasticizer by solvent casting.PLLA-PEG-PLLA/PEG blends with different blend ratios were prepared,and the plasticizing effect and miscibility of PEG in block copolymer were intensively investigated compared to PLLA/PEG blends.The results indicated that the PEG was an effective plasticizer for the block copolymer.The blending of PEG decreased glass-transition temperature and accelerated the crystallization of both the PLLA and PLLA-PEG-PLLA matrices.The PEG was completely miscible when blended with block copolymer and it improved thermal stability of the block copolymer matrix but not of the PLLA matrix.Film extensibility of PLLA-PEG-PLLA/PEG blends steadily increased as the PEG ratio increased.These non-toxic and highly flexible PLLA-PEG-PLLA/PEG bioplastics are promising candidates for several applications such as biomedical devices,tissue scaffolds and packaging materials.

Significance of Nanoparticles Aggregation with Cattaneo-Christov Heat Flux on the Water and Ethylene Glycol Mixture Based MWCNTs-Nanofluid Flow over a Stretching Cylinder

This work aims to analyze the flow of electrically conducting MWCNTs-nanofluid over a stretching cylinder with the aggregation and non-aggregation effects of nanoparticles. The working fluid comprised a combination of water and ethylene glycol, with volumetric proportions of (50:50) considered. Convective boundary constraints and modified Fourier law are implemented in heat transmission assessment. The mathematical flow model is formulated in the form of PDEs and is transformed into ODEs via similarity transformation. Numerical outcomes will be obtained with the use of the bvp4c technique and will be displayed with the help of graphs and tables. The results show that the surface drag coefficient is enhanced in the case of aggregation of nanoparticles whereas heat transfer rate is enhanced in the non-aggregation effect of nanoparticles. Furthermore, the temperature distribution enhances the increasing values of particle volume fraction in the case of aggregation effects of nanoparticles whereas temperature distribution lowers in the case of non-aggregation effect of nanoparticles. .

Interface tuning of Cu+/CuO by zirconia for dimethyl oxalate hydrogenation to ethylene glycol over Cu/SiO2 catalyst

An efficient ZrO2-doped Cu/SiO2 catalyst was fabricated through hydrolysis precipitation method(HP)and used to produce ethylene glycol(EG)through dimethyl oxalate(DMO)hydrogenation.The states for zirconia on copper catalyst and roles in DMO hydrogenation were investigated through various characterization tools,including N2 physical adsorption,XRD,H2-TPR,Methyl glycolate-TPD-MS,XPS,XAES as well.Compared with common ammonia evaporation and co-precipitation methods used in catalyst preparation,this HP method is found to effectively suppress the agglomeration and further size growth of copper nanoparticles by enhancing the interactions between copper and zirconia species.More importantly,uniform distribution of ZrO2 dopant is achieved due to the pseudo-homogeneous reactions in the mixing step of catalyst preparation.A proper amount of zirconium dopant helps achieve the desirable proportion of Cu+/(Cu++CuO)for surface copper species,especially promotes the production of Cu+species originated from Cu-ZrO2 species at the interface of copper and zirconia particles.In comparison with Cu+species formed from copper phyllosilicates reduction,the Cu+sites derived from Cu-ZrO2 species show higher adsorption ability of MG,an important intermediate species in ethylene glycol production.These adsorbed MG molecules further react with atomic hydrogen shifted from adjacent metallic copper surface,leading to a higher catalytic behavior.For the EG production via DMO hydrogenation,the turnover frequency(TOF)normalized by CuO species on CuZr/SiO2 catalyst is 1.8 times than that of traditional Cu/SiO2 counterpart.Due to the enhanced synergy effect between Cu+and Cuo active sites,a lower activation energy of ester hydrogenation on this ZrO2-doped Cu/SiO2 catalyst is believed to be responsible for the significant improvement.

The adsorption properties of NaY zeolite for separation of ethylene glycol and 1,2-butanediol: Experiment and molecular modelling

The separation of ethylene glycol(EG)and 1,2-butanediol(1,2-BDO)azeotrope in the synthesis process of EG via coal and biomass is becoming of increasing commercial and environmental importance.Selective adsorption is deemed as the most promising methods because of energy saving and environment favorable.In this paper,NaY zeolite was used to separate 1,2-BDO from EG,and its adsorption properties was then investigated.The isotherms of EG and 1,2-BDO in vapor and liquid phases from 298 to 328 K indicated that they fitted Langmuir model quite well,and the NaY zeolite absorbent favored EG more than 1,2-BDO.The Grand Canonical Monte Carlo(GCMC)and molecular dynamics(MD)simulation techniques were conducted to investigate the competition adsorption and diffusion characteristics in different adsorption regions.It was observed that EG and 1,2-BDO molecules all have the most probable locations of the center of the 12-membered ring near the Na cations.The diffusivities of EG are lower than those of 1,2-BDO at the same adsorption concentration.At last,the breakthrough curves of the binary mixture regressed from the empirical Dose–Response model in fixed-bed column showed that the adsorption selectivity of EG could reach to as high as 2.43,verified that the NaY zeolite could effectively separate EG from 1,2-BDO.This work is also helpful for further separation of other dihydric alcohol mixtures from coal and biomass fermentation.

THE STRUCTURE AND PROPERTIES OF CHITOSAN/POLYETHYLENE GLYCOL/SILICA TERNARY HYBRID ORGANIC-INORGANIC FILMS

The ternary hybrid films consisting of chitosan(CS),polyethylene glycol(PEG)and nano-sized silica which was surface-modified by amino groups(RNSA)were prepared.The structures of the blend membranes were characterized by attenuation total reflection-infrared spectroscopy(ATR-IR),X-ray diffraction(XRD),optical microscopy(OM)and differential scanning calorimetry(DSC).The results showed that the addition of silica affected not only the distribution and crystallinity of PEG on the sample surface,but also the ...

Flexible transparent wood enabled by epoxy resin and ethylene glycol diglycidyl ether

Transparent wood has potential application in intelligent building,solar cell,electronics,and other advanced materials,while its single functionability hinders its further development.Flexible transparent wood(FTW)was prepared by alkaline pretreatment and bleaching treat-ment of paulownia wood followed by impregnation of epoxy resin and ethylene glycol diglycidyl ether(EDGE).The eff ect of delignifi cation degree on the optical and mechani-cal properties of FTW was studied,and the infl uence of the epoxy/EDGE ratio on the fl exibility and mechanical proper-ties of FTW was also investigated.The results showed that higher delignifi cation degree resulted in higher transmit-tance of FTW.More EDGE addition led to better fl exibility of FTW,while overmuch addition of EDGE will reduce the mechanical properties.The optimal FTW sample resulted in a high transmittance of 89%and an ultrahigh haze value of 97%with outstanding fl exibility and excellent mechanical properties.The investigation of FTW broadens the research fi eld of transparent wood,and provides great possibility for its application in fl exible wearable devices and fl exible materials.

Ethylene glycol purification by melt crystallization:Removal of 2-methoxyethanol impurity

The coal(syngas)-to-ethylene glycol(CTEG),is contaminated with the naughty impurity 2-Methoxyethanol(ME)generated during the hydrogenation stage,which affect the quality of EG for fiber-grade polyester production.Distillation,is the employed separation process in industrial,which makes production complicated because of the heat sensitivity of the impurities system.Melt crystallization has been regarded as an effective technology to obtain high-purity organic compounds based on the melting points difference,which could avoid the problems by heating.In this work,we have explored the feasibility of the static melt crystallization on the separation of EG/ME in a jacketed crystallization tube.The experimental parameters were investigated,which covers crystallization and sweating stage in each step.The results showed that the purity of EG could reach≥99.8%from the binary system studied via the quaternary separation process.

Improvement of porous polyvinylidene fluoride-co-hexafluropropylene hollow fiber membranes for sweeping gas membrane distillation of ethylene glycol solution

Porous polyvinylidene fluoride-co-hexafluropropylene(PVDF-HFP)hollow fiber membranes were fabricated through a wet spinning process.In order to improve the membrane structure,composition of the polymer solution was adjusted by studying ternary phase diagrams of polymer/solvent/non-solvent.The prepared membranes were used for sweeping gas membrane distillation(SGMD)of 20 wt% ethylene glycol(EG)aqueous solution.The membranes were characterized by different tests such as N2 permeation,overall porosity,critical water entry pressure(CEPw),water contact angle and collapsing pressure.From FESEM examination,addition of 3 wt% glycerol in the PVDF-HFP solution,produced membranes with smaller finger-likes cavities,higher surface porosity and smaller pore sizes.Increasing the polymer concentration up to 21 wt% resulted in a dense spongy structure which could significantly reduce the N2 permeance.The membrane prepared by 3 wt% glycerol and 17 wt% polymer demonstrated an improved structure with mean pore size of 18 nm and a high surface porosity of 872 m^−1.CEPw of 350 kPa and overall porosity of 84% were also obtained for the improved membrane.Collapsing pressure of the membranes relatively improved by increasing the polymer concentration.From the SGMDtest,the developed membrane represented a maximumpermeate flux of 28 kg·m^−2·h^−1 which is almost 19% higher than the flux of plain membrane.During 120 h of a long-termSGMD operation,a gradual flux reduction of 30% was noticed.In addition,EG rejection reduced from 100% to around 99.5% during 120 h of the operation.

Efficiency and Effectiveness Concepts Applied in Shell and Tube Heat Exchanger Using Ethylene Glycol-Water Based Fluid in the Shell with Nanoparticles of Copper Oxide (CuO)

This article consists of an analytical solution for obtaining the outlet temperatures of the hot and cold fluids in a shell and tube heat exchanger. The system analyzed through the concepts of efficiency, effectiveness (ε-NTU), and irreversibility consisted of a shell and tube heat exchanger, with cold nanofluid flowing in the shell and hot water flowing in the tube. The nanofluid consists of 50% of ethylene glycol and water as the base fluid and copper oxide (CuO) nanoparticles in suspension. The volume fractions of the nanoparticles range from 0.1 to 0.5. The flow rate in the nanofluid ranges from 0.0331 to 0.0568 Kg/s, while two mass flow rates, from 0.0568 and 0.5 Kg/s, for the hot fluid, are used as parameters for analysis. Results for the efficiency, effectiveness, irreversibility, heat transfer rate, and outlet temperatures for cold and hot fluids were obtained graphically. The flow laminarization effect was observed through the results obtained and had significant relevance in the results.

Synthesis and Hydrophilic Performance of Poly(Lactic Acid)-Poly(Ethylene Glycol) Block Copolymers

Lactide was synthesized using lactic acid and stannous octoate as raw material and catalyst, respectively. Poly(lactic acid)-poly(ethylene glycol) (PLA-PEG) was prepared by lactide and poly (ethylene glycol) (PEG) via ring-opening polymerization. The most appropriate technological conditions of synthesis of lactide were researched in the paper. The copolymers were measured by Infrared spectroscopy (IR) and 1H nuclear magnetic resonance (1H NMR). The results proved that the lactide and PLA-PEG were synthesized successfully. Hydrophilic performance of the copolymer was measured by a water contact angle tester after prepared into a flat membrane. The water contact angle changed from 81.5? to 71.6?, which proved that the hydrophily of PLA-PEG was better than PLA.

Hydroformylation of formaldehyde to glycolaldehyde:An alternative synthetic route for ethylene glycol

Hydroformylation of formaldehyde to glycolaldehyde(GA),as a vital reaction in both direct and indirect process of syngas to ethylene glycol(EG),shows great advantages in the aspects of the process complexity and clean production.The hydroformylation of formaldehyde to GA is thermodynamically unfavourable,requiring the development of highly efficient hydroformylation catalytic systems,appropriate reaction conditions and in-depth understanding of the reaction mechanisms.In this review,we have made a detailed summary on the reaction in terms of the reaction network,thermodynamics,metal complex catalysts(including central metals and ligands),reaction conditions(e.g.,temperature,pressure,formaldehyde source and solvent)and promoters.Furthermore,the reaction mechanisms,involving neutral and anionic complex in the catalytic cycle,have been summarized and followed by a discussion on the impact of the crucial intermediates on the reaction pathways and product distribution.A brief overview of product separation and catalyst recovery has been presented in the final part.This review gives new insights into the factors that impact on the formaldehyde hydroformylation and reaction mechanisms,which helps to design more efficient catalytic systems and reaction processes for EG production via the hydroformylation route.

Heterogeneous Cu_2O-mediated ethylene glycol production from dimethyl oxalate

An efficient process for the conversion of dimethyl oxalateinto ethylene glycol with high selectivity and high yield over Cu_2O was investigated. In situ formed Cu as a true catalytically active species showed a good catalytic performance for DMO conversion to produce EG in 95% yield.

High-gravity technology intensified Knoevenagel condensation-Michael addition polymerization of poly (ethylene glycol)-poly (n-butyl cyanoacrylate) for blood-brain barrier delivery

Poly(ethylene glycol)-poly(n-butyl cyanoacrylate)(PEG-PBCA)is a remarkable drug delivery carrier for permeating blood-brain barrier.In this work,a novel high-gravity procedure was reported to intensify Knoevenagel condensation-Michael addition polymerization of PEG-PBCA.A series of PEG-PBCA containing different block ratios were synthesized with narrow molecular weight distribution of polydispersity indexes less than 1.1.Furthermore,the reaction time reduced 60%compared to conventional stirred tank reactor process.Chemical structures of as-prepared polymers were characterized.In vitro drug delivery performance was evaluated.The cytotoxicity of PEG-PBCA to brain microvessel endothelial cells(BMVEC)decreases with the extension of the PEG chain and the shortening of the PBCA chain.The polymer cellular uptake to BMVECs was better after improving hydrophilicity by PEG block.Results of bloodbrain barrier permeability demonstrated that medium length of PBCA chain and short PEG chain are favorable for hydrophobic Nile red permeation,while long PEG chain and short PBCA chain are beneficial to delivery water-soluble doxorubicin hydrochloride(Dox).The average apparent permeability coeffi-cient increased 1.7 and 0.25 times than that of raw Nile red and Dox,respectively.High-gravity intensi-fied condensation polymerization should have great potential in brain drug delivery system.

Pt-modulated Cu/SiO_(2) catalysts for efficient hydrogenation of CO_(2)-derived ethylene carbonate to methanol and ethylene glycol

Copper-based catalysts were widely used in the heterogeneous selective hydrogenation of ethylene carbonate(EC),a key step in the indirect conversion of CO_(2) to methanol.However,a high H_(2)/EC molar ratio in feed is required to achieve favorable activity and the methanol selectivity still needs to be improved.Herein,we fabricated a series of Pt-modulated Cu/SiO_(2) catalysts and investigated their catalytic performance for hydrogenation of EC in a fixed bed reactor.By modulating the Pt amount,the optimal 0.2Pt-Cu/SiO_(2) catalyst exhibited the highest catalytic performance with99%EC conversion,over 98%selectivity to ethylene glycol and 95.8%selectivity to methanol at the H_(2)/EC ratio as low as 60 in feed.In addition,0.2Pt-Cu/SiO_(2) catalyst showed excellent stability for 150 h on stream over different H_(2)/EC ratios of 180-40.It is demonstrated a proper amount of Pt could significantly lower the H_(2)/EC molar ratio,promote the reducibility and dispersion of copper,and also enhance surface density of Cu+species.This could be due to the strong interaction of Cu and Pt induced by formation of alloyed Pt single atoms on the Cu lattice.Meanwhile,a relatively higher amount of Pt would deteriorate the catalytic activity,which could be due to the surface coverage and aggregation of active species.These findings may enlighten some fundamental insights for further design of Cu-based catalysts for the hydrogenation of carbon–oxygen bonds.

AN APPROACH TO SYNTHESIZE POLY(ETHYLENE GLYCOL)-b-POLY(ε-CAPROLACTONE) WITH TERMINAL AMINO GROUP via SCHIFF'S BASE AS AN INITIATOR

A new method to synthesize a degradable terminal amino group-containing copolymer,poly(ethylene glycol)-b- poly(ε-caprolactone)(MPEG-PCL-NH_2),was developed in the following three steps:(1)the ring-opening polymerization (ROP)ofε-caprolactone from the Schiff base prepared from benzatdehyde and ethanolamine(Ph-CH=NCH_2CH_2OH)used as an initiator to obtain heterobifunctional poly(ε-caprolactone)with one terminal Schiff base group and one hydroxyl group (HO-PCL-CH_2CH_2N=CH-Ph);(2)the coupling reaction of t...

Preparation And Characterization of a New Blend of Poly(2-hydroxyethyl methacrylate) And Poly(ethylene glycol)

A new blend of poly(2-hydroxyethyl methacrylate) (PHEMA) with poly (ethylene glycol) (PEG) was prepared. The results from solid-state NMR indicate that the PHEMEG(88:12, w/w) blend is miscible on a molecular level.

Exfoliation of poly(ethylene glycol)-intercalated graphite oxide composite in water without sonication

A novel method for exfoliating graphite oxide(GrO)was implemented through the mass water absorption of a GrO–poly(ethylene glycol)(GrO–PEG)composite.The GrO–PEG composite was prepared by intercalating PEG into the lamellae of GrO,and the variation of the basal spacing was measured by X-ray diffraction analysis.The yield of graphene was measured with an ultraviolet–visible spectrophotometer,and the properties of graphene oxide(GO)were characterized by atomic force microscopy,transmission electron microscopy(TEM),Raman spectrometry,and Fourier transform infrared spectroscopy.Increasing intercalation time was found to improve the yield of GO,whereas increasing the PEG molecular weight had the opposite effect.The GO sheets produced from the intercalation–absorption–exfoliation process were found to be a four-layer structure.TEM and Raman analyses indicate that the graphitized structure and oxygen groups of GO were preserved during the exfoliation process.Most importantly,the results show that good-quality GO could be prepared via a mild method involving water absorption of a GrO–PEG composite.